Sage Journals: Discover world-class research

Abstract

This article presents a three-dimensional finite element full analysis, which describes the thermomechanical behaviour of a direct injection diesel engine piston. The piston moving in a complex environment is exposed to several interactions during engine operation. The thermomechanical model takes in account the most important load. The piston is subjected to the coupled action of the thermal loads due to the transfer of heat from the head to the body and the mechanical load represented by the combustion pressure and the inertial load due to the important change of direction of the piston in the cylinder bore.

The response of the simulated model by critical loads makes it possible to know and to analyse the operating temperatures, the corresponding thermal expansion and the thermomechanical deformations and stresses. The results obtained will be the source data for the development of a global elastohydrodynamic model and will provide a good tool for piston design.

Keywords

thermomechanical model direct injection diesel engine piston global elastohyrodynamic model

Get full access to this article

View all access options for this article.

References

Paschkia

Baker

H D

A method for determining unsteady state heat transfer by mean of an electrical analog

Trans. ASME, February 1942, 64 (2), 105–112.

Sanders

J C

Schramm

W B

Analysis of variation of piston temperature with piston dimension and undercrown cooling. Report 895, NACA, Cleveland, Ohio, 1948, 89–98.

Eichelberg

Some new investigations on old combustion engine problems

Engineering, 1939, 148.

E S

Temperature distribution in diesel engine pistons

The Engineer, 30 November 1962, 935–939.

Woschni

Fieger

Determination of local heat transfer coefficients at the piston of a high speed diesel engine by evaluation of measured temperature distribution. SAE paper 790834, 1979.

C H

Thermoelastic behavior of an aluminum diesel engine piston. General Motors Research Labs, Warren, SAE paper 860163, 1986.

Swallow

Bruni

Kinsella

F H

Hons

B T

The design and development of pistons for high speed direct injection diesel engines. In the AE Technical Symposium, 1986, paper 4.

Munro

Dubois

Matteoda

Ferrous diesel pistons for highway application. In Technology for the 90's, 1990, paper 17.

K P

C H

Goenka

P K

Elastohydrodynamique lubrication of piston skirt

Trans. ASME, J. Tribology, April 1987, 109, 356–362.

10.

Zhu

Y Z

Cheng

H S

Arai

Hamai

A numerical analysis for piston skirt in mixed lubrication Part II: Deformations considerations

Trans. ASME, J. Tribology, January 1993, 115, 125–133.

11.

Dursunkaya

Keribar

Ganapathy

A model of piston secondary motion and elastohydrodynamic skirt lubrication

J. Tribology, October 1994, 116, 777–785.

12.

Tahar Abbes

Bounif

Maspeyrot

Un modéle global de piston de moteur diesel — Partie I: Développement du modéle

Proc. JNSTA, Alger, Algérie, 1999, pp. 49–53.

13.

FEMLAB, Version 2.1, COMSOL AB Software, 1994–2001.

14.

Wilson

E L

Habibuallah

SAP90: A series of computer programs for the static and dynamic finite element analysis of structures

Users Manual, 1989 (Computers and Structures, Inc., CA, USA).

15.

Sihling

Woschni

Experimental investigation of the instantaneous heat transfer in the cylinder of a high speed diesel engine. SAE paper 790833, 1979.

16.

Furuhama

Suzuki

Temperature distribution of piston rings and piston in high speed diesel engine

Bull. Jap. Soc. Mech. Engrs, 1979, 22 (174), 1788–1795.

17.

Bendersky

A special thermocouple for measuring transient temperatures

Mech. Engng, 1953, 75, 117.

18.

Woschni

A universally applicable equation for the instantaneous heat transfer coefficient in the internal combustion engine. SAE paper 670931, 1967.

19.

Hohenberg

G F

Advanced approaches for the heat transfer calculations. SAE paper 790825, 1979.

20.

Trapu

Transferts thermiques dans les moteurs é combustion interne. Mesure et modélisation

Rev. Gén. Therm., France, 1981, 233, 385–390.

21.

Brun

Moteurs thermiques alternatifs, parties mobiles, pistons et segments

Techniques de l'Ingénieur, 1992, 3, B396.

22.

Haywood

J. B

Internal Combustion Engine Fundamentals, 1989, pp. 668–709(McGraw-Hill, New York).

A thermomechanical model of a direct injection diesel engine piston

Abstract

Keywords

Get full access to this article

References