The current paper outlines recent developments to algorithms and software for critical buckling and natural vibration analysis and optimum design of prismatic plate assemblies, based on the exact strip approach and the Wittrick—Williams algorithm. The current paper acts as a single source document discussing recent progress and planned future explorations in: initial local postbuckling of stiffened panels; discrete optimization of composite structures to satisfy manufacturing requirements; discontinuous cost functions; constraints on fundamental natural frequencies and frequency-free bands; a feasibility study of response surface optimization; and multi-level optimization of composite aircraft wings. The numerous references provide fuller technical details and illustrative examples.
CourantR.Variational methods for the solution of problems of equilibrium and vibrations. Bull. Am. Math. Soc., 1943, 49(1), 1–23.
2.
TurnerM. J.CloughR.W.MartinH. C.ToppL.C.Stiffness and deflection analysis of complex structures. J. Aero. Sci., 1956, 23(9), 805–823.
3.
ZienkiewiczO. C.The finite element method, 1977 (McGraw-Hill, London).
4.
KantorovichL.V.KrylovV. I.Approximate methods of higher analysis, 1958 (Noordhoff, Groningen).
5.
CheungY. K.The finite strip method in the analysis of elastic plates with two opposite simply supported ends. Proc. Inst. Civ. Eng., 1968, 40(1), 1–7.
6.
CheungM. S.CheungY. K.GhaliA.Analysis of slab and girder bridges by the finite strip method. Bldg. Sci., 1970, 5(2), 95–104.
7.
PlankR. J.WittrickW. H.Buckling under combined loading of thin, flat-walled structures by a complex finite strip method. Int. J. Numer. Methods Eng., 1974, 8(2), 323–339.
8.
DaweD. J.Finite strip buckling analysis of curved plate assemblies under biaxial loading. Int. J. Solids Struct., 1977, 13(11), 1141–1155.
9.
WittrickW. H.A unified approach to the initial buckling of stiffened panels in compression. Aero. Q., 1968, 24(3), 265–282.
10.
WilliamsF. W.WittrickW. H.Computational procedures for a matrix analysis of the stability and vibration of thin flat-walled structures in compression. Int. J. Mech. Sci., 1969, 11(12), 979–998.
11.
WittrickW. H.WilliamsF.W.A general algorithm for computing natural frequencies of elastic structures. Q. J. Mech. Appl. Math., 1971, 24(3), 263–284.
12.
WittrickW. H.WilliamsF. W.An algorithm for computing critical buckling loads of elastic structures. J. Struct. Mech., 1973, 1(4), 497–518.
13.
WilliamsF.W.KennedyD.ButlerR.AndersonM. S.VICONOPT: Program for exact vibration and buckling analysis or design of prismatic plate assemblies. AIAA J., 1991, 29(11), 1927–1928.
14.
DERA. Final report of the GARTEUR action group on structural optimisation SM(AG13), vols 1–3, 1997 (DERA, Farnborough).
15.
PowellS. M.WilliamsF. W.AskarA.-S.KennedyD.Local postbuckling analysis for perfect and imperfect longitudinally compressed plates and panels. In Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Long Beach, CA, 1998, Pt I, pp. 595–603 (AIAA, Reston, VA).
16.
KennedyD.OngT. J.O'LearyO. J.WilliamsF.W.Practical optimisation of aerospace panels. In Proceedings of the 1st ASMO UK/ISSMO Conference, Ilkley, 1999, pp. 217–224 (MCB University Press, Bradford).
17.
TownsendL. J.KennedyD.Optimum design of stiffened panels with vibration constraints using response surface modelling. In Proceedings of the 2nd ASMO UK/ISSMO Conference, Swansea, 2000, pp. 219–226 (University ofWales, Swansea).
18.
FischerM.KennedyD.FeatherstonC. A.Multilevel optimization of a composite aircraft wing using Viconopt MLO. In Proceedings of the 9th AIAA/ISSMO Symposium on Multidisciplinary analysis and optimization, Atlanta, GA, 2002, paper AIAA 2002–5511 (AIAA, Reston, VA).
19.
WittrickW. H.WilliamsF. W.Buckling and vibration of anisotropic or isotropic plate assemblies under combined loadings. Int. J. Mech. Sci., 1974, 16(4), 209–239.
20.
AndersonM. S.KennedyD.Transverse shear deformation in exact buckling and vibration analysis of composite plate assemblies. AIAA J., 1993, 31(10), 1963–1965.
21.
AndersonM. S.WilliamsF. W.WrightC. J.Buckling and vibration of any prismatic assembly of shear and compression loaded anisotropic plates with an arbitrary supporting structure. Int. J. Mech. Sci., 1983, 25(8), 585–596.
22.
von KarmanT.TsienH. S.The buckling of spherical shells by external pressure. J. Aero. Sci., 1939, 7, 43–50.
23.
von KarmanT.DunnL. G.TsienH. S.The influence of curvature on the buckling characteristics of structures. J. Aero. Sci., 1940, 7, 276–289.
24.
von KarmanT.TsienH. S.The buckling of thin cylindrical shells under axial compression. J. Aero. Sci., 1941, 8, 303–312.
25.
KoiterW. T.Over de stabiliteit van het elastisch evenwicht (On the stability of elastic equilibrium). PhD Thesis, University of Delft, 1945. English translation issued as NASA TT F-10, 833, 1967.
26.
BudianskyB.Theory of buckling and postbuckling behaviour of elastic structures. In Advances in applied mechanics (Ed. YihC. S.), vol. 14, 1974, pp. 1–65 (Academic Press, New York).
27.
ThompsonJ. M. T.Basic principles in the general theory of elastic stability. J. Mech. Phys. Solids, 1963, 11(1), 13–20.
28.
ChilverA. H.Coupled modes of elastic buckling. J. Mech. Phys. Solids, 1967, 15(1), 15–28.
29.
ThompsonJ. M. T.The estimation of elastic critical loads. J. Mech. Phys. Solids, 1967, 15, 311–317.
30.
WalkerA. C.An analytical study of the rotationally symmetric nonlinear buckling of a complete spherical shell under external pressure. Int. J. Mech. Sci., 1968, 10, 695–710.
31.
SewellM. J.A general theory of equilibrium paths through critical points. Proc. R. Soc., 1968, A306, (Pt I), 201–223; (Pt II), 225–238.
32.
ThompsonJ. M. T.A general theory for the equilibrium and stability of discrete conservative systems. J. Appl. Math. Phys. (ZAMP), 1969, 20, 797–846.
GioncuV.General theory of coupled instabilities. Thin- Walled Struct., 1994, 19(2–4), 81–127.
35.
SingerJ.BaruchM.HarariO.On the stability of eccentrically stiffened cylindrical shells under axial compression. Int. J. Solids Struct., 1967, 3, 445–470.
36.
ArboczJ.BabcockC. D.The effect of general imperfections on the buckling of cylindrical shells. J. Appl. Mech., 1969, 36(1), 28–38.
37.
ThompsonJ. M. T.HuntG. W.A theory for the numerical analysis of compound branching. J. Appl. Math. Phys. (ZAMP), 1971, 22, 1001–1015.
38.
ThompsonJ. M. T.HuntG.W.A general theory of elastic stability, 1973 (Wiley, London).
39.
TvergaardV.Imperfection sensitivity of a wide integrally stiffened panel under compression. Int. J. Solids Struct., 1973, 9(1), 177–192.
40.
van der NeutA.Mode interaction with stiffened panels. In Buckling of structures (Ed. BudianskyB.), 1974, pp. 117–131 (Springer-Verlag, Berlin).
41.
SuppleW. J.Changes of wave-forms of plates in the postbuckling range. Int. J. Solids Struct., 1970, 6, 1243–1258.
42.
BushnellD.Optimization of stiffened panels in which mode jumping is accounted for. In Proceedings of the 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Kissimmee, FL, 1997, Pt III, pp. 2123–2162 (AIAA, Reston, VA).
43.
Graves SmithT. R.The ultimate strength of thin-walled columns of arbitrary length. In Thin walled steel structures (Eds. RockeyK. C.HillH. V.), 1969, pp. 35–60 (Crosby Lockwood, London).
44.
van HoutenM. H.ZdunekA.Post-buckling and collapse analysis, final technical report, GARTEUR SM(AG25) TP-149, 2004.
45.
ZimmermannR.RolfesR.POSICOSS - improved postbuckling simulation for design of fibre composite stiffened fuselage structures. Compos. Struct., 2006, 73(2), 171–174.
46.
DegenhardtR.RolfesR.ZimmermannR.RohwerK.COCOMAT - improved material exploitation of composite airframe structures by accurate simulation of postbuckling and collapse. Compos. Struct., 2006, 73(2), 175–178.
47.
PowellS. M.Buckling and postbuckling of prismatic plate assemblies using exact eigenvalue theory. PhD Thesis, University of Wales, Cardiff, 1997, pp. 105–155.
48.
FischerM.KennedyD.Local postbuckling analysis of curved aerospace structures. In Proceedings of the 22nd International Congress of Aeronautical Sciences, Harrogate, 2000, pp. 423 (Optimage, Edinburgh).
49.
YuanS.YeK.WilliamsF. W.KennedyD.Recursive second order convergence method for natural frequencies and modes when using dynamic stiffness matrices. Int. J. Numer. Methods Eng., 2003, 56(12), 1795–1814.
50.
WatsonA.KennedyD.Mode jumping in post-buckled stiffened panels. In Proceedings of the 4th International Conference on Thin-Walled Structures, Loughborough, 2004, pp. 573–580 (Institute of Physics Publication, Bristol).
51.
ButlerR.WilliamsF. W.Optimum design using VICONOPT, a buckling and strength constraint program for prismatic assemblies of anisotropic plates. Comput. Struct., 1992, 43(4), 699–708.
52.
EdwardsD. A.Cost optimization of stiffened panels using VICONOPT. AIAA J., 1998, 36(2), 267–272.
53.
O'LearyO. J.Optimisation of prismatic plate structures with natural frequency constraints. PhD Thesis, University of Wales, Cardiff, 2000.
54.
O'LearyO. J.WilliamsF. W.KennedyD.Optimum stiffened panel design with fundamental frequency constraint. Thin-Walled Struct., 2001, 39(7), 555–569.
55.
KennedyD.O'LearyO. J.WilliamsF. W.Optimum design of prismatic plate assemblies with spectral gap constraints. In Proceedings of the 5th International Symposium on Vibrations of Continuous Systems, Berchtesgaden, 2005, pp. 36–38 (Virginia Polytechnic Institute and State University, Blacksburg, VA).
56.
FischerM.KennedyD.FeatherstonC. A.Multilevel optimization of aerospace and lightweight structures. In Proceedings of the 23rd International Congress of Aeronautical Sciences, Toronto, 2002, pp. 344.1–344.9 (Canadian Aeronautics and Space Institution, Ottawa).
57.
VanderplaatsG. N.MosesF.Structural optimization by methods of feasible directions. Comput. Struct., 1973, 3(4), 739–755.
58.
GarfinkelR. S.NemhauserG. L.Integer programming, 1972 (Wiley, New York).
59.
OngT. J.Practical optimisation of lightweight structures. PhD Thesis, University of Wales, Cardiff, 2000.
60.
KennedyD.loannidisG.FeatherstonC. A.Discrete optimum design of composite plates including longitudinal voids. In Proceedings of the 6th World Congress on Computational mechanics in conjuction with 2nd Asian-Pacific Congress on Computational Mechanics, Beijing, 2004, paper M636, pp. 1–10 (Tsinghua University Press, Beijing).
61.
St PierreR. L.Jr.KoopmannG. H.A design method for minimizing the sound power radiated from plates by adding optimally sized, discrete masses. Trans. ASME J. Mech. Des., 1995, 117B, 243–251.
62.
McMillanA. J.KeaneA. J.Shifting resonances from a frequency band by applying concentrated masses to a thin rectangular plate. J. Sound Vib., 1996, 192(2), 549–562.
63.
BennettP. N.WilliamsF. W.Wave propagation along prismatic plate structures with masses attached by springs. In Proceedings of the 6th International Conference on Recent Advances in Structural Dynamics, Southampton, 1997, vol. 3, pp. 1–16 (Univ. Southampton).
64.
BoxG. E. P.DraperN. R.Empirical model-building and response surfaces, 1987 (Wiley, New York).
65.
ToropovV.V.van KeulenF.MarkineV. L.AlvarezL. F.Multipoint approximations based on response surface fitting: A summary of recent developments. In Proceedings of the 1st ASMO UK/ISSMO Conference, Ilkley, 1999, pp. 371–380 (MCB University Press, Bradford).
66.
Microsoft Corporation, Microsoft Excel Solver: User's guide, 1980 (Microsoft, Redmond, WA).
67.
HahnB. D.Essential MATLAB for scientists and engineers, 1997 (Arnold, London).
68.
FeatherstonC. A.KennedyD.WestonD. A.KoffiK.Design rules for panel buckling under combined shear, compression and bending. In Proceedings of the 4th International Conference on Thin-Walled Structures, Loughborough, 2004, pp. 153–160 (Institute of Physics Publication, Bristol).
69.
MSC/Software, MSC/NASTRAN version 70.7, 1999 (MSC, Los Angeles, CA).
70.
MSC/Software, MSC/PATRAN version 9.0, 1999 (MSC, Los Angeles, CA).
71.
FischerM.Multilevel optimisation of aerospace and lightweight structures. PhD Thesis, University of Wales, Cardiff, 2002, pp. 121–131.
