Sage Journals: Discover world-class research

Abstract

A machine's weight is directly related to the strength of the installed joint actuators, and it is reasonable to assume that minimizing the installed joint torques will minimize the machine weight. Unfortunately, the workspace area will also reduce with the installed joint torques; thus there must be a compromise between weight (joint strength) and workspace. Methods are presented to generate the set of static workspaces corresponding to a range of installed joint torques. In this way the relationship between the workspace area and installed joint torque can be established. A numerical example is presented which shows that a small reduction in the workspace area can lead to a substantial reduction in installed joint torque and hence machine weight.

Keywords

legged robots walking machines design joint torque workspace

Get full access to this article

View all access options for this article.

References

Song

S. M.

Waldron

K. J.

Machines That Walk: The Adaptive Suspension Vehicle, 1989 (MIT Press, Cambridge, Massachusetts).

Todd

D. J.

Walking Machines, An Introduction to Legged Robots, 1985 (Kogan Page Limited, London).

Raibert

M. H.

Legged Robots That Balance, 1986 (MIT Press, Cambridge, Massachusetts).

Fichter

E. F.

Kerr

D. R.

Walking machine design based on certain aspects of arthropod leg design. In Proceedings of Twenty-second ASME Conference, Scottsdale, Arizona, 1992, Vol. 45, pp. 561–572 (American Society of Mechanical Engineers, New York).

Fichter

Walking machine based on the beetle leg mechanics. In Proceedings of Ninth World Congress of IFToMM, Milan, Italy, 1995, Vol. 3, pp. 2292–2296.

Zhang

S. J.

Howard

Sanger

D. J.

Kerr

D. R.

Miao

Walking machine design based on the mechanics of the Stewart-platform. In Proceedings of Second ASME ESDA Conference, London, 1994, Vol. 64-8.3, pp. 849–853 (American Society of Mechanical Engineers, New York).

Zhang

S. J.

Multi-legged walking machines: Mechanics, design and gait. PhD thesis, University of Salford, 1995.

Huang

Zhao

Y. S.

The accordance and optimisation-distribution equations of the overdeterminate inputs of walking machines. Mech. Mach. Theory, 1994, 29, 327–332.

Waldron

K. J.

Force and motion management in legged locomotion. IEEE J. Robotics and Automn, 1986, RA-2(4), 214–220.

10.

Klein

C. A.

Chung

T. S.

Force interaction and allocation for the legs of a walking vehicle. IEEE J. Robotics and Automn, 1987, RA-3(6), 546–555.

11.

Gao

X. C.

Song

S. M.

Zheng

C. Q.

A generalized stiffness matrix method for force distribution of robotic systems with indeterminacy. Trans. ASME, J. Mech. Des., 1993, 115, 585–591.

12.

Zhang

S. J.

Howard

Sanger

D. J.

Workspaces of walking machines, Part II: Static workspaces. Robotica, 1996, 14, 219–226.

Multilegged walker design—the joint torque versus workspace compromise

Abstract

Abstract

Keywords

Get full access to this article

References