In this paper, a numerical study of turbulent flow over the S-shaped hydrofoil at 0° angle of attack has been reported. Here, the flow takes place over concave and convex surfaces and is accompanied by the favourable and adverse pressure gradients and flow separation. Modelling such a flow poses a formidable challenge. In the present work four turbulence models, namely, k–∊ realizable, k–ω shear stress transport
BradshawP.Effects of streamline curvature on turbulent flow. AGARD-AG-1691973.
2.
SoR. M. C.MellorG. L.Experiment on convex curvature in turbulent boundary layer. J. Fluid Mech.19736043–62.
3.
SoR. M. C.MellorG. L.Experiment on turbulent boundary layers on a concave wall. Aeronaut. Q.19752625–40.
4.
BarlowR. S.JohnstonJ. P.Structure of a turbulent boundary layer on a concave surface. J. Fluid Mech.1988191137–176.
5.
BaskaranV.SmitsA. J.JoubertP. N.A turbulent flow over a curved hill part 1. growth of an internal boundary layer. J. Fluid Mech.198718247–83.
6.
BaskaranV.SmitsA. J.JoubertP. N.A turbulent flow over a curved hill part 2. effect of streamline curvature and streamwise pressure gradient. J. Fluid Mech.1991232377–402.
7.
GibsonM. M.JonesW. P.YounisB. A.Calculation of turbulent boundary layers on curved surfaces. Phys. Fluids198124(3)389–395.
8.
RichmondM. C.PatelV. C.Convex and concave surface curvature effects in wall-bounded turbulent flows. AIAA J.199129(6)895–902.
9.
LuoJ.LakshminarayanaB.Prediction of strongly curved turbulent duct flows with Reynolds stress model. AIAA J.1997a35(1)91–98.
10.
LuoJ.LakshminarayanaB.Analysis of streamline curvature effects on wall-bounded turbulent flows. AIAA J.1997b35(8)1273–1279.
11.
DavidsonL.Prediction of the flow around an airfoil using a Reynolds Stress transport model. Trans. ASME J. Fluids Eng.,199511750–57.
12.
RumseyC. L.GatskiT. B.Turbulence model predictions of extra-strain rate effects in strongly-curved flow. In the 37th Aerospace Sciences Meeting and Exhibit, Reno, NV, 11-14 January 1999, AIAA 99-0157.
13.
SleitiA. K.KapatJ. S.Comparison between EVM and RSM turbulence models in predicting flow and heat transfer in rib-roughened channels. J. Turbulence20067(29)1–21.
YakinthosK.VlahostergiosZ.GoulasA.Modeling the flow in a 90° rectangular duct using one Reynolds-stress and two eddy-viscosity models. Int. J. Heat and Fluid Flow20082935–47.
16.
BalabaskaranV.Lakshmana GowdaB. H.VenkatasubramanianN.Flow visualization studies over S-Blades. J. Flow Vis. Image Process.19985249–259.
SimpsonR. L.ChewY. T.ShivaprasadB. G.The structure of a separating turbulent boundary layer, part 1, mean flow and Reynolds stresses. J. Fluid Mech.198111323–51.
30.
ShilohK.ShivaprasadB. G.SimpsonR. L.The structure of a separating turbulent boundary layer, part 3, transverse velocity measurements. J. Fluid Mech.198111375–90.
31.
SpezialeC. G.SarkarS.GatskiT. B.Modeling the pressure-strain correlation of turbulence: An invariant dynamical systems approach. J. Fluid Mech.1991227245–272.
