In this study, the effect of the space or gap values — between the overlap portions of the spot welded specimens — which is especially important for spot-welded joints subjected to uniaxial in-plane loads, on fatigue life are investigated. In order to do these investigations, a computer programme is developed using ANSYS (version-10) finite-element programme. Numerical results based on the developed computer programme are compared with the experimental results conducted by Sheppard for the validation of the programme and are found to be satisfactory. Fatigue life properties for different type of spot-welded specimens and different gap values are calculated numerically using this developed computer programme with different fatigue-life approaches to see the gap effect on the fatigue life of the spot-welded specimens. It is found that maximum stress and strain values increase, hence fatigue life decrease, with increasing gap values, and this situation is clearer for tensile shear (TS) specimens than modified tensile shear (MTS) ones because of the flanged pieces of the MTS specimens. It is also found that maximum stresses and strains, hence the fatigue-life values, do not change so much for gap values lower than 0.0025 mm.
BarkeyM. E.KangH.LeeY. L.Failure modes of single resistance spot welded joints subjected to combined fatigue loading. Int. J. Mater. Prod. Technol.200116(6/7)510–527.
ErtasA. H.Fatigue behavior of spot welds MSc Thesis, Bogazici University2004.
8.
Di Fant-JaeckelsH.GaltierA.Fatigue lifetime prediction model for spot welded structures. La Revue de Metallurgie-CIT2000183–95.
9.
SalviniP.ScardecchiaE.DemofontiG.A procedure for fatigue life prediction of spot welded joints. Fatigue Fract. Eng. Mater. Struct199720(8)1117–1128.
10.
HouZ.WangY.LiCChenC.An analysis of resistance spot welding. Weld.J.20068536–40.
11.
BarkeyM. E.KangH.LeeY.Evaluation of multiaxial spot weld fatigue parameters for proportional loading. Int. J. Fatigue200022691–702.
12.
WondseokJ.BaeD.SohnI.Fatigue design of various type spot welded lap joints using the maximum stress. KSME Int. J.200418(1)106–113.
13.
PeekerE.NiemiE.Fatigue crack propogation model based on a local strain approach. J. Constr. Steel Res.199949139–155.
14.
PanN.Fatigue life study of spot welds PhD Thesis, Stanford University2000.
15.
RadajD.Theory of forces and stresses in spot welded overlap joints. Arch. Appl. Mech.19966722–34.
16.
ZhangS.Stress intensities at spot welds. Int. J. Fracture199788167–185.
17.
SocieD. F.Fatigue-life prediction using local stressstrain concepts. Expl Mech.1977250–56.
18.
RoessleM. L.FatemiA.Strain-controlled fatigue properties of steels and some simple aproximations. Int. J. Fatigue200022495–511.
19.
AdibH.GilgertJ.PluvinageG.Fatigue life duration prediction for welded spots by volumetric method. Int. J. Fatigue20042681–94.
20.
ZhangY.TaylorD.Optimization of spotwelded structures. Finite Elem. Anal. Des.2007371013–1022.
21.
NewmanJ. A.DowlingN. E.A crack growth approach to life prediction of spot-welded lap joints. Fatigue Fract. Eng. Mater. Struct.1998211123–1132.
22.
DavidsonJ. A.ImhofE. J.A Fracture mechaics and system-stiffness approach to fatigue performance of spot-welded sheet steels. In Proceedings of the SAE International Congress and Exposition, Detroit, Michigan, USA1983.
23.
CooperJ. F.SmithR. A.The measurement of fatigue cracks at spot welds. Int. J. Fatigue19857137–140.
24.
SheppardS.PanN.Spot welds fatigue life prediction with cyclic strain range. Int. J. Fatigue200224519–528.
25.
PollardB.Fatigue strength of spot welds in titaniumbearing HSLA steels. In Proceedings of the SAE International Congress and Exposition, Detroit, Michigan1982.
26.
SheppardS. D.StrangeM.Fatigue life estimation in resistance spot welds: Initiation and early growth phase. Fatigue Fract. Eng. Mater. Struct.199215(6)531–549.
27.
PookL. P.Fracture mechanics analysis of the fatigue behavior of spot welds. Int. J. Fract.19752173–176.
28.
GeanA.WestgateS. A.KuczaJ. C.EhrstromJ. C.Static and fatigue behavior of spot-welded 5182-O aluminum alloy sheet. Weld. J.19997890–96.
29.
El-SayedM. E. M.StawiarskiT.FruntigerR.Fatigue analysis of spot-welded joints under variable amplitude load history. Eng. Fract. Mech.199655(3)363–369.
30.
DavidsonJ. A.A Review of the fatigue properties of spot-welded sheet steels. In Proceedings of the SAE International Congress and Exposition, Detroit, Michigan, USA1982.
31.
DannbauerH.GaierC.HofwimmerK.Fatigue analysis of welding seams and spot joints in automotive structures. In Proceedings of the SAE International Congress and Exposition Detroit, Michigan, USA2005.
