Three types of thin, flexible force sensor were studied under a variety of loading conditions to determine their suitability for measuring grip force. Static accuracy, hysteresis, repeatability, and drift errors were established, the effects of shear force and surface curvature were considered, and dynamic accuracy and drift were measured. Novel tests were developed to consider dynamic accuracy and sensitivity to shear loadings. Additionally, three sensors were evaluated in a real-life gripping scenario, measuring grip force during a golf shot. Comments are made on sensor performance, ease of use, and durability.
ChadwickE. K. J.NicolA. C.A novel force transducer for the measurement of grip force. J. Biomech., 2001, 34(1), 125–128.
2.
McGorryR. W.A system for the measurement of grip forces and applied moments during hand tool use. Appl. Ergon., 2001, 32(3), 271–279.
3.
Van der KampM.ConwayB. A.NicolA. C.A novel instrumented ring for the measurement of grip force adjustments during precision grip tasks. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 2001, 215(H2), 421–427.
4.
YunM. H.KotaniK.EllisD.Using force sensitive resistors to evaluate hand tool grip design. In Proceedings of the Human Factors Society 36th Annual Meeting, Santa Monica, CA, 1992, pp. 806–810.
5.
BrayA.BarbatoG.LeviR.Theory and practice of force measurement, 1990 (Academic Press, London).
6.
AmisA. A.Variation of finger forces in maximal isometric grasp tests on a range of cylinder diameters. J. Biomed. Eng., 1987, 9, 313–320.
BachusK. N.DeMarcoA. L.JuddK. T.HorwitzD. S.BrodkeD. S.Measuring contact area, force, and pressure for bioengineering applications: Using Fuji Film and TekScan systems. Med. Eng. Phys., 2006, 28(5), 483–488.
9.
WilsonD. C.NiosiC. A.ZhuQ. A.OxlandT. R.WilsonD. R.Accuracy and repeatability of a new method for measuring facet loads in the lumbar spine. J. Biomech., 2006, 39(2), 348–353.
10.
WilsonD. R.AprelevaM. V.EichlerM. J.HarroldF. R.Accuracy and repeatability of a pressure measurement system in the patellofemoral joint. J. Biomech., 2003, 36, 1909–1915.
11.
HsiaoH.GuanJ.WeatherlyM.Accuracy and precision of two in-shoe pressure measurement systems. Ergonomics, 2002, 45(8), 537–555.
12.
Ferguson-PellM.HagisawaS.BainD.Evaluation of a sensor for low interface pressure applications. Med. Eng. Phys., 2000, 22, 657–663.
13.
PolliackA. A.SiehR. C.CraigD. D.LandsbergerS.McNeilD. R.AyyappaE.Scientific validation of two commercial pressure sensor systems for prosthetic socket fit. Prosthet. Orthot. Int., 2000, 24, 63–73.
14.
BuisA. W. P.ConveryP.Calibration problems encountered while monitoring stumps/socket interface pressures with force sensing resistors: Techniques adopted to minimise inaccuracies. Prosthet. Orthot. Int., 1997, 21, 179–182.
15.
WoodburnJ.HelliwellP. S.Observations on the F-Scan in-shoe pressure measuring system. Clin. Biomech., 1996, 11(5), 301–304.
16.
WernerF. W.GreenJ. K.FortinoM. D.MannK. A.ShortW. H.Evaluation of a dynamic intra-articular contact pressure sensing system. In 41st Annual Meeting, Orthopaedic Research Society, Orlando, Florida, 1995, p. 705.
17.
PavlovicJ. L.TakahashiY.BechtoldJ. E.GustiloR. B.KyleR. F.Can the Tekscan sensor accurately measure dynamic pressures in the knee joint. In 17th Annual Meeting, American Society of Biomechanics, Iowa City, Iowa, 1993, pp. 135–136.
18.
Tekscan.Tekscan user manual: Sensing solutions for the 21st century, 2004, 309 p.
19.
The Institute of Measurement and Control. Guide to the measurement of force. The Institute of Measurement and Control, 1998.
20.
SchmidtE. R.RobertsJ. R.RothbergS. J.Thin, flexible sensors for grip force measurements in sport. In Asia Pacific Congress on Sports Technology, Tokyo, 2005, pp. 399–405.
21.
MatherJ. S. B.The role of club response in the design of current golf clubs. In Proceedings of the 14th International Modal Analysis Conference, Michigan, 1996, pp. 397–403.
22.
BudneyD. R.Measuring grip pressure during the golf swing. Res. Q., 1979, 50(2), pp. 272–277.
23.
NikonovasA.HarrisonA. J. L.HoultS.SammutD.The application of force-sensing resistor sensors for measuring forces developed by the human hand. Proc. Instn Mech. Engrs Part H: J. Engineering in Medicine, 2004, 218, 121–125.
24.
KongY.-K.LoweB. D.Optimal cylindrical handle diameter for grip force tasks. Int. J. Ind. Ergon., 2005, 35, 495–507.
25.
SchmidtE. R.RobertsJ.RothbergS.Time-resolved measurements of grip force during a golf shot. In The engineering of sport 6 (Eds. MoritzE.F.HaakeS.), 2006, pp. 57–62 (Springer, New York).
26.
BudneyD. R.BellowD. G.Evaluation of golf club control by grip pressure measurement. In Science of golf I, 1990, pp. 30–35 (E & FN Spon, London).
27.
BS PD 6461–3: 1995. General metrology: Guide to the expression of uncertainty in measurement, 1995.
