A theoretical study on the response of a point elasto-hydrodynamic lubrication contact to a normal harmonic vibration under thermal and non-Newtonian conditions

Abstract

Time-dependent thermal and non-Newtonian elastohydrodynamic lubrication of an elliptical point contact subjected to a normal harmonic vibration was studied numerically in this work. The contact was idealized as between an infinite plane and a spherical roller. The normal vibration of the roller was described by specifying the centre of the spherical roller to the infinite plane (without deformation) as a cyclic function of time. The shear-thinning rheological property of the lubricant was described by the Eyring model. The time-dependent numerical solution was achieved instant after instant in each period of a vibration. The periodic errors were checked at the end of each vibration cycle until the responses of variables such as pressure, film thickness, and temperature were all periodic functions with the same frequency of the roller's vibration. At each instant, the pressure field was solved with a multi-grid method, the surface deflection produced by pressure was determined with a multi-level multi-integration technique, the non-Newtonian flow of the lubricant was considered by using the equivalent viscosity calculated according to the shear-strain rate along the entrainment direction only, and the temperature field was evaluated with a finite-difference scheme through a column-by-column relaxation process. The computing time for a cyclic solution was 12–15 h on a personal computer with a 3.0 GHz central processing unit. The effects of both the amplitude and the frequency of the vibration were investigated. It was shown that the time-dependent solution is significantly different from the steady-state solution, especially when the amplitude of vibration is large and the frequency of vibration is high. Corresponding to a typical thermal and non-Newtonian case, numerical solutions were also obtained under isothermal and Newtonian, isothermal and non-Newtonian, and thermal and Newtonian conditions. Comparisons between these solutions indicate that, under time-dependent conditions, the effects of thermal and non-Newtonian flow are similar to those under steady-state conditions.

Keywords

elastohydrodynamic lubrication thermal time-dependent non-Newtonian elliptical contact normal harmonic vibration

Get full access to this article

View all access options for this article.

References

Ranger

A. P.

Ettles

C. M. M.

Cameron

The solution of the point contact elastohydrodynamic problem. Proc. R. Soc. Lond., 1975, A346, 227–244.

Hamrock

B. J.

Dowson

Isothermal elastohydrodynamic lubrication of point contacts, part 3 - fully flooded results. Trans. ASME, J. Lubr. Technol., 1977, 99, 264–276.

Dowson

Ehret

Past, present and future studies in elastohydrodynamics. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 1999, 213(J5), 317–333.

Zhu

Wen

A full numerical solution for the thermoelastohydrodynamic problem in elliptical contacts. Trans. ASME, J. Tribol., 1984, 106(2), 246–254.

Kim

H. J.

Ehret

Dowson

Taylor

C. M.

Thermal elastohydrodynamic analysis of circular contacts. Part 1: Newtonian model. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215(J4), 339–352.

Kim

H. J.

Ehret

Dowson

Taylor

C. M.

Thermal elastohydrodynamic analysis of circular contacts. Part 2: Non-Newtonian model. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2001, 215(J4), 353–362.

Liu

Jiang

Yang

Kaneta

Non-Newtonian thermal analyses of point EHL contacts using the Eyring model. Trans. ASME, J. Tribol., 2005, 127(1), 70–81.

Wijnant

Y. H.

Venner

C. H.

Larsson

Eriksson

Effects of structural vibrations on the film thickness in an EHL circular contact. Trans. ASME, J. Tribol., 1999, 121(2), 259–264.

Holmes

M. J. A.

Evans

H. P.

Hughes

T. G.

Snidle

R. W.

Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 1: Theory and validation. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217(J4), 289–303.

10.

Holmes

M. J. A.

Evans

H. P.

Hughes

T. G.

Snidle

R. W.

Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 2: Results. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2003, 217(J4), 305–321.

11.

Jin

Z. M.

Yang

Cui

Dowson

Transient elastohydrodynamic analysis of elliptical contacts. Part 1: Isothermal and Newtonian lubricant solution. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2004, 218(J3), 211–224.

12.

Zhao

Sadeghi

Hoeprich

M. H.

Analysis of EHL circular contact start up: Part II - surface temperature rise model and result. Trans. ASME, J. Tribol., 2001, 123(1), 75–82.

13.

Cui

Yang

Transient thermo-EHL theory of point contact - the process of a bump on the fast surface passing a bump on the slower surface. In Transient process in tribology (Eds Dalmaz

) Proceedings of the 30th Leeds-Lyon Symposium on Tribology, Lyon, 2003, 2004, pp. 253–261 (Elsevier, Amsterdam).

14.

Yang

Cui

Jin

Z. M.

Dowson

Transient elastohydrodynamic analysis of elliptical contacts. Part 2: Thermal and Newtonian lubricant solution. Proc. IMechE, Part J: J. Engineering Tribology, 2005, 219(J3), 187–200.

15.

Cui

Yang

Jin

Z. M.

Dowson

Transient elastohydrodynamic analysis of elliptical contacts. Part 3: Non-Newtonian lubricant solution under isothermal and thermal conditions. Proc. IMechE, Part J: J. Engineering Tribology, 2007, 221(J1), 63–73.

16.

Yang

Jin

Z. M.

Liu

Dowson

On the time-dependent, thermal and non-Newtonian elastohydrodynamic lubrication of line contacts subjected to normal and tangential vibrations. Proc. Instn Mech. Engrs, Part J: J. Engineering Tribology, 2004, 218(J2), 187–200.

17.

Markho

P. H.

Highly accurate formulas for rapid calculation of the key geometrical parameters of elliptic Hertzian contacts. Trans. ASME, J. Tribol., 1987, 109, 640–647.

18.

Yang

Wen

A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1990, 112(4), 631–636.

19.

Kumar

Booker

J. F.

A finite element cavitation algorithm. Trans. ASME, J. Tribol., 1991, 113, 276–286.

20.

Roelands

C. J. A.

Correlation aspects of viscosity-temperature-pressure relationship of lubricating oils. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 1966.

21.

Houpert

New results of traction force calculation in elastohydrodynamic lubrication. Trans. ASME, J. Tribol., 1985, 107, 241–248.

22.

Dowson

Higginson

G. R.

Elastohydrodynamic lubrication: The fundamentals of roller gear lubrication, 1966, (Pergamon, Oxford).

23.

Venner

C. H.

Multilevel solution of the EHL line and point contact problems. PhD Thesis, Twente University, Enschede, The Netherlands, 1991.

24.

Brandt

Lubrecht

A. A.

Multilevel matrix multiplication and fast solution of integral equations. J. Comput. Phys., 1990, 90, 348–370.

25.

Yang

Shen

On the theory of time-dependent micro-TEHL for a non-Newtonian lubricant in line contacts. Lubr. Sci., 1996, 8(3), 297–312.

26.

Yang

Rodkiewicz

C. M.

Time-dependent TEHL solution to centrally supported tilting pad bearings subjected to harmonic vibration. Tribol. Int., 1996, 29(5), 433–443.

27.

Yang

Kaneta

Nishikawa

Formation of steady dimples in point TEHL contacts. Trans. ASME, J. Tribol., 2001, 123(1), 42–49.

28.

Safa

M. M. A.

Gohar

Pressure distribution under a ball impacting a thin lubricant layer. Trans. ASME, J. Tribol., 1986, 108, 372–376.

29.

Dowson

Wang

An analysis of the normal bouncing of a solid elastic ball on oily plate. Wear, 1994, 179, 29–37.