A new two-node catenary cable element for the geometrically non-linear analysis of cable-supported structures

Abstract

This article presents a geometrically non-linear finite-element method for an accurate and efficient analysis of spatial cable structures. A two-node catenary cable element is formulated accurately considering the effect of self-weight of cable element. The tangent stiffness matrix of the cable element is derived as an accurate explicit expression of structural parameters and the nodal forces of the cable element are then also analytically calculated. Pre-stress in the cable element may be considered in the formulation. Three classical numerical examples are first provided to show the accuracy and efficiency of this method and the developed method is then applied to construction stage simulation in order to determine the erection parameters of a suspension bridge through progressive non-linear analysis. The cable element proposed can be conveniently used for the geometric non-linear analysis of flexible structures such as long-span suspension bridges, cable-stayed bridges, and tension structures.

Keywords

cable element catenary cable geometric non-linear cable supported structures

Get full access to this article

View all access options for this article.

References

Knudson

W. C.

, Static and dynamic analysis of cable net structures. (1971) Doctoral dissertation, University of California, Berkely, California.

Ernst

H. J.

, ‘Der E-Modul von Seilen unter Berücksichtigung des Durchhanges’ Der Bauingenieu 40 (1965): 52–55.

Tang

J. M.

Shen

Z. Y.

Qian

R. J.

, ‘A nonlinear finite element method with five-node curved element for analysis of cable structures’ In Proceedings of the IASS International Symposium, 1995, vol. 2, pp. 929–935.

Tang

J. M.

Zhao

L. H.

, ‘A Eeulerian geometrically non-linear finite element method with two-node cable element for the analysis of cable structures’ Shanghai J. Mech. 20 1 (1999): 89–94 (in Chinese).

J. H.

W. Z.

, ‘The non-linear finite element analysis of cable structures based on four-node isoparametric curved element’ J. Chongqing Jianzhu Univ. 27 6 (2005): 55–58 (in Chinese).

Y. L.

Wang

Z. M.

, ‘Nonlinear analysis of flexible cable structures using the finite element method’ Engng. Mech. 17 (2000): 36–43 (in Chinese).

Yang

M. G.

Chen

Z. Q.

, ‘Nonlinear analysis of cable structures using a two-node curved cable element of high precision’ Engng. Mech. 20 1 (2003): 42–47 (in Chinese).

Huang

M. G.

Ren

W. X.

, ‘A new parabolic cable element in static analysis’ In Proceedings of the Ninth International Conference on Inspection, appraisal, repairs and maintenance of structures, Fuzhou, China, 2005, pp. 271–282.

Ren

S. Y.

, ‘Static analysis of cables’ configuration in cable-stayed bridges’ J. Tongji Uni. (Nat. Sci.) 33 5 (2005): 595–599 (in Chinese).

10.

Jayaraman

H. B.

Knudson

W. C.

, ‘A curved element for the analysis of cable structures’ Comput. Struct. 14 (1981): 325–333.

11.

Luo

X. H.

Xiao

R. C.

Xiang

H. F.

, ‘Cable element based on exact analytical expressions’ J. Tongji Univ. (Nat. Sci.) 33 4 (2005): 445–450 (in Chinese).

12.

Andreu

Gil

Roca

, ‘A new deformable catenary element for the analysis of cable net structures’ Comput. Struct. 84 (2006): 1882–1890.

13.

Bathe

K. J.

Bolourchi

, ‘Large displacement analysis of three-dimensional beam structures’ Int. J. Numer. Methods Eng. 14 (1979): 961–986.

14.

Chen

Z. Q.

Agar

T. J. A.

, ‘Geometric nonlinear analysis of flexible spatial beam structures’ Comput. Struct. 49 (1993): 1083–1094.

15.

Washizu

, Variational methods in elasticity and plasticity (Oxford: Pergamon Press 1982).

16.

O'Brien

W. T.

Francis

A. J.

, ‘Cable movements under two dimensional loads’ J. Struct. Div., ASCE 90 ST3 (1964): 89–123.

17.

West

H. H.

Kar

A. K.

, ‘Discretized initial value analysis of cable nets’ Int. J. Solids Struct. 9 (1973): 1403–1420.