Sage Journals: Discover world-class research

Abstract

This article describes a simple structured microvalve made of polydimethylsiloxane (PDMS) and glass. For easy operation, the microvalve is actuated by external air pressure. The microvalve is fabricated by replica moulding using a negative photoresist (SU-8) as the mould. For low cost and biocompatibility, PDMS is used as the chip material. The PDMS valve is bonded to a Pyrex glass substrate using an O₂ plasma surface treatment. It was found that no leakage occurs under a valve-actuating air pressure of 0.35 MPa when the injection pressure of liquid in the microchannel of the valve is 0.01-0.04 MPa. The fabricated microvalve is applied to a microfluidic chip having one inlet and two outlet channels. Fluid flow is controlled by the microvalve.

Keywords

polydimethylsiloxane microvalve pneumatic actuation replica moulding

Get full access to this article

View all access options for this article.

References

Shoji

Esashi

Microflow devices and systems. J. Micromech. Microeng., 1994, 4, 157–171.

Kim

J.-H.

K.-H.

Kang

C. J.

Jeon

Kim

Y.-S.

A disposable thermopneumatic-actuated microvalve stacked with PDMS layers and ITO-coated glass. Microelectron. Eng., 2004, 73–74, 864–869.

Suzuki

Yoneyama

Integrated microfluidic system with electrochemically actuated on-chip pumps and valves. Sens. Actuat. B, 2003, 96, 38–45.

Liu

R. H.

Beebe

D. J.

Fabrication and characterization of hydrogel-based microvalves. J. Microelectromech. Syst., 2002, 11, 45–53.

Hosokawa

Maeda

R. J.

A pneumatically-actuated three-way microvalve fabricated with polydimethlsiloxane using the membrane transfer technique. Micromech. Microeng., 2000, 10, 415–420.

J. S.

Shoji

A disposable, dead volume-free and leak-free in-plane PDMS microvalve. Sens. Actuat. A, 2004, 114, 438–444.

Grover

W. H.

Skelley

A. M.

Liu

C. N.

Lagally

E. T.

Mathies

R. A.

Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devices. Sens. Actuat. B, 2003, 89, 315–323.

Armani

Liu

Aluru

Re-configurable fluid circuits by PDMS elastomer micromachining. In Proceeding of IEEE Micro Electro Mechanical System (MEMS) 99, Orlando, FL, 17–21 January 1999, pp. 222–227 (IEEE, Piscataway, NJ).

Hsu

T.-R.

MEMS and microsystems design and manufacture, 2002, pp. 102–103 (McGraw-Hill, New York).

10.

Xia

Whitesides

G. M.

Soft lithography. Annu. Rev. Mater. Sci., 1998, 28, 153–184.

11.

Hillborg

Ankner

J. F.

Gedde

U. W.

Smith

G. D.

Yasuda

H. K.

Wikstram

Crosslinked polydimethylsiloxane exposed to oxygen plasma studied by neutron reflectometry and other surface specific techniques. Polymer, 2000, 41, 6851–6863.

Simple structured polydimethylsiloxane microvalve actuated by external air pressure

Abstract

Abstract

Keywords

Get full access to this article

References