This article attempts to anticipate likely trends and developments in the field of engineering tribology. It is, of course, a personal view and the authors have chosen to focus on the field of concentrated contacts operating in elastohydrodynamic lubrication (EHL), where they are tempted to make the kind of predictions required with at least a modicum of confidence. The main thrust of the argument presented is that engineering tribology will develop considerably, and move towards modelling failure of the EHL mechanism rather than simply explaining its successful operation.
GrubinA. N., Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces. In Proceedings of the Symposium on Investigation of the contact of machine components by A. N. Grubin and I. E. Vinogradova (Ed. KetovaKh. F.), 1949, Central Scientific Research Institute for Technology and Mechanical Engineering (TsNIITMASh), book no. 30, Moscow, pp. 115–166 (DSIR Translation).
2.
DowsonD.HigginsonG. R., A numerical solution to the elasto-hydrodynamic problem. J. Mech. Eng. Sci., (1959), 1, 16–21.
3.
DysonA.NaylorH.WilsonA. R., The measurement of oil-film thickness in elastohydrodynamic contacts. Proc. Instn Mech. Engrs, 180 (1965–1966): 119–134. (pt. 3B).
4.
KannelJ. W., Measurements of pressures in rolling contact. Proc. Instn Mech. Engrs, 180 (1965–1966): 135–142. (pt. 3B).
5.
HamiltonG. M.MooreS. L., Deformation and pressure in an elastohydrodynamic contact. Proc. R. Soc. Lond., A322 (1971): 313–330.
6.
HigginsonG. R., The origin of EHL studies at Leeds. In Proceedings of the 35th Leeds–Lyon Symposium on Tribology, Leeds, UK, (2008).
7.
CroweT. A., Some recent advances in mechanical engineering on shipboard. Proc. Instn Mech. Engrs, 158 (1948): 264–277.
8.
RangerA. P.EttlesC. M. M.CameronA., The solution of the point contact elastohydrodynamic problem. Proc. R. Soc. Lond., A346 (1975): 227–244.
9.
HamrockB. J.DowsonD., Isothermal elastohydrodynamic lubrication of point contacts: Part III: Fully flooded results. Trans. ASME, J. Lubr. Technol., 99 (1976): 264–276.
10.
HirstW.MooreA. J., Non-Newtonian behaviour in elastohydrodynamic lubrication. Proc. R. Soc. Lond., A337 (1974): 100–121.
11.
BairS.WinerW. O., Shear stress measurements of lubricants at high pressure. Trans. ASME, J. Lubr. Technol., 101 (1979): 251–257.
12.
HookeC. J., Dynamic effects in EHL contacts. In Proceedings of the 29th Leeds–Lyon Symposium on Tribology, Elsevier tribology series 41 (Eds DowsonD.), 2003, pp. 69–78 (Elsevier, Amsterdam).
13.
PatirN.ChengH. S., An average flow model or determining effects of three-dimensional roughness on partial hydrodynamic lubrication. Trans. ASME, J. Lubr. Technol., 100 (1978): 12–17.
14.
GreenwoodJ. A.TrippJ. H., The contact of two nominally flat rough surfaces. Proc. Instn Mech. Engrs, 187 (1971): 625–633.
15.
TrippJ. H., Surface roughness effects in hydrodynamic lubrication: The flow factor method. Trans. ASME, J. Lubr. Technol., 105 (1983): 458–465.
16.
HarpS. R.SalantR. F., An average flow model of rough surface lubrication with inter asperity cavitation. Trans. ASME, J. Tribol., 123 (2001): 134–143.
17.
HookeC. J.LiK. Y.Morales-EspejelG., Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 1: Low amplitude, sinusoidal roughness. Proc. IMechE, Part C: J. Mechanical Engineering Science, 221C5 (2007): 535–550 DOI: 10.1243/0954406JMES519.
18.
HookeC. J.LiK. Y., Rapid calculation of the pressures and clearances in rough, rolling-sliding elastohydrodynamically lubricated contacts. Part 2: General roughness. Proc. IMechE, Part C: J. Mechanical Engineering Science, 220C6 (2006): 915–925 DOI: 10.1243/09544062C03505.
19.
DysonA., The failure of elastohydrodynamic lubrication of circumferentially ground steel discs. Proc. Instn Mech. Engrs, 190 (1976): 699–711.
20.
EvansH. P.SnidleR. W., Analysis of micro-elastohydrodynamic lubrication for engineering contacts. Tribol. Int., 29 (1996): 659–667.
21.
StribeckR., Kugellager Für Beliebige Belastungen. Zeitschrift des Vereines Deutscher Ingenieure, 46 (1902): 1341–1348. 46, 1432–1438; 46, 1463–1470.
22.
OilaA.BullS. J., Assessment of the factors influencing micropitting in rolling/sliding contacts. Wear, 258 (2005): 1510–1524.
23.
LaineÉ.OlverA. V.BeveridgeT. A., Effect of lubricants on micropitting and wear. Tribol. Int., 41 (2008): 1049–1055.
24.
HolmesM. J. A.EvansH. P.SnidleR. W., Analysis of mixed lubrication effects in simulated gear tooth contacts. Trans. ASME J. Tribol., 127 (2005): 61–69.
25.
OkamuraH., A contribution to the numerical analysis of isothermal elastohydrodynamic lubrication. In Proceedings of the 9th Leeds–Lyon Symposium on Tribology, 1983, pp. 313–320 (Butterworths, London).
26.
HoupertL. G.HamrockB. J., Fast approach for calculating film thicknesses and pressures in elastohydrodynamically lubricated contacts at high loads. Trans. ASME, J. Tribol., 108 (1986): 411–420.
27.
ElcoateC. D.EvansH. P.HughesT. G., On the coupling of the elastohydrodynamic problem. Proc. IMechE, Part C: J. Mechanical Engineering Science, 212C4 (1998): 307–318 DOI: 10.1243/0954406981521231.
28.
HughesT. G.ElcoateC. D.EvansH. P., Coupled solution of the elastohydrodynamic line contact problem using a differential deflection method. Proc. IMechE, Part C: J. Mechanical Engineering Science, 214C4 (2000): 585–598 DOI: 10.1243/0954406001523920.
29.
HolmesM. J. A.EvansH. P.SnidleR. W., Comparison of transient EHL calculations with a start up experiment. In Proceedings of the 29th Leeds–Lyon Symposium on Tribology, Elseviers Tribology series (Eds DowsonD.), 2002, vol. 41, pp. 79–89.
30.
WangF. C.JinZ. M., Transient elastohydrodynamic lubrication of hip joint implants. Trans ASME, J. Tribol., 1301 (2008): 011007.1-011007.11.
31.
JinZ. M., Computational modelling of biotribology of natural hip joints and replacements. In Recent advances in tribological modelling, 2009 (Institute of Physics Seminar, London).
32.
HolmesM. J. A.HughesT. G.EvansH. P.SnidleR. W., Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method. Part 1: Theory and validation. Proc. IMechE, Part J: J. Engineering Tribology, 217J4 (2003): 289–303 DOI: 10.1243/135065003768618641.
33.
MorgridgeD. A., Mixed lubrication in gear pumps, PhD Thesis Cardiff University, 2009.
34.
VennerC. H.LubrechtA. A., Multilevel methods in lubrication, Elsevier tribology series (Ed. DowsonD.), vol. 37, 2000 (Elsevier, Amsterdam).
35.
CrookA. W., Elastohydrodynamic lubrication of rollers. Nature, 190 (1961): 1182.
36.
DowsonD.HigginsonG. R., Reflections on early studies of elasto-hydrodynamic lubrication. In Proceedings of the IUTAM Symposium on Elastohydrodynamics and microelastohydrodynamics (Eds SnidleR. W.EvansH. P.), 2006, pp. 3–21 (Springer, Dordrecht, The Netherlands).
37.
BishopI. F.SnidleR. W., Running in of ground surfaces under elastohydrodynamic conditions. Studies of engine bearings and lubrication, 1983, special publication 539, SAE paper no. 830310, pp. 53–64 (Society of Automotive Engineers, Warrendale).
38.
HabchiW.DemirciI.EyheramendyD.Morales-EspejelG.VergneP., A finite element approach of thin film lubrication in circular EHD contacts. Tribol. Int., 40 (2007): 1466–1473.
39.
QiaoH.EvansH. P.SnidleR. W., Comparison of fatigue model results for rough surface elastohydrodynamic lubrication. Proc. IMechE, Part J: J. Engineering Tribology, 222J3 (2008): 381–393 DOI: 10.1243/13506501JET347.
40.
ZhuD.RenN.WangQ., Pitting life prediction approach based on 3-D line contact mixed EHL analysis and subsurface von Mises stress calculation. In Proceedings of the Fifth China International Symposium on Tribology, Beijing, 2008.
41.
LundbergG.PalmgrenA., Dynamic capacity of rolling bearings. Acta Politech. Mech. Eng. Ser. 2, 4 (1952): 5–50. (Royal Swedish Academy of Engineering Science).
42.
IoannidesE.HarrisT. A., A new fatigue life model for rolling bearings. Trans. ASME, J. Tribol., 107 (1985): 367–378.
43.
ZaretskyE. V.Fatigue criterion to system design, life and reliability. J. Propuls. Power, 3 (1987): 76–83.
44.
HarunM. N., Computational wear simulation for metal-on-metal hip joint replacement. PhD Thesis, Leeds University 2007.
45.
SharifK. J.EvansH. P.SnidleR. W.BarnettD.EgorovI. M., The effect of elastohydrodynamic film thickness on a wear model for worm gears. Proc. IMechE, Part J: J. Engineering Tribology, 220J3 (2006): 295–306 DOI: 10.1243/13506501JET122.
46.
MedinaS.OlverA. V., An analysis of misaligned spline couplings. Proc. IMechE, Part J: J. Engineering Tribology, 216J5 (2002): 269–279 DOI: 10.1243/135065002760364813.
47.
DingJ.LeenS. B.WilliamsE. J.ShipwayP. H., Finite element simulation of fretting wear-fatigue interaction in spline couplings. Tribol. Mater Surf. Interfaces, 2 (2008): 10–24.
48.
GangXu.SadeghiF.CogdellJ. D., Debris denting effects on elastohydrodynamic lubricated contacts. Trans. ASME, J. Tribol., 119 (1997): 579–587.
49.
Dwyer-JoyceR. S., Predicting the abrasive wear of ball bearings by lubricant debris. Wear, 233-235 (1999): 692–701.
50.
NeliasD.VilleF., Detrimental effects of debris dents on rolling contact fatigue. Trans. ASME, J. Tribol., 122 (2000): 55–64.
51.
SlackT. S.RajeN.SadeghiF.DollG.HoeprichM. R., EHL modelling for nonhomogeneous materials: The effect of material inclusions. Trans. ASME, J. Tribol., 129 (2007): 256–273.
52.
BairS., Measurements of real non-Newtonian response for liquid lubricants under moderate pressures. Proc. IMechE, Part J: J. Engineering Tribology, 215J3 (2001): 223–233 DOI: 10.1243/1350650011543493.
53.
HabchiW.EyheramendyD.BairS.VergneP.Morales-EspejelG., Thermal elastohydrodynamic lubrication of point contacts using a Newtonian/generalized Newtonian lubricant. Tribol. Lett., 30 (2008): 41–52.
54.
ClarkeA.SharifK. J.EvansH. P.SnidleR. W., Heat partition in rolling/sliding EHL contacts. Trans. ASME, J. Tribol., 128 (2006): 67–78.
55.
ClarkeA.SharifK. J.EvansH. P.SnidleR. W., Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts. Proc. IMechE, Part J: J. Engineering Tribology, 221J3 (2007): 223–235 DOI: 10.1243/13506501JET219.
56.
KanetaM.NishikawaH.KanadaT.MatsudaK., Abnormal phenomena appearing in EHL contacts. Trans. ASME, J. Tribology, 118 (1996): 886–892.
57.
HartingerM.DumontM.-L.IoannidesS.GosmanD.SpikesH., CFD modelling of a thermal and shear-thinning elastohydrodynamic line contact. Trans. ASME, J. Tribol., 130 (2008): 041503-1-041503-16.
58.
AlmqvistT.LarssonR., Thermal transient rough EHL contact simulations by aid of computational fluid dynamics. Tribol. Int., 41 (2008): 683–693.
