Abstract
Abstract
A resonant microcantilever beam gas sensor was designed and fabricated in Carnegie Mellon University using complementary metal oxide semiconductor (CMU-CMOS) technology. The cantilever beam modified with a suitable sorbent coating was demonstrated as a chemical transducer for monitoring hazardous vapours and gases at trace concentrations. The design of the cantilever beam included interdigitated fingers to allow electrostatic actuation of the device and a piezoresistive Wheatstone bridge design to read out the deflection signal. The cantilever beam resonant frequency was modelled using the Euler-Bernoulli beam theory and ANSYS. The beam resonant frequency was measured with an optical laser Doppler vibrometer. Good agreement was obtained among the measured, simulated, and modelled resonant frequencies. A custom sorbent polymer layer was coated on the surface of the cantilever beam to allow its operation as a gas-sensing device. The frequency response as a function of exposure to the nerve agent simulant dimethylmethylphosphonate (DMMP) at different concentrations was measured, which allowed a demonstrated detection at a concentration of 20 ppb or 0.1 mg/m3. The air-polymer partition coefficient K, for DMMP was estimated and compared favourably with the known values for related polymers.
Keywords
Get full access to this article
View all access options for this article.
