Laser short-pulse heating of solid surfaces results in non-equilibrium energy transport in the region irradiated by the laser beam. Owing to the large temperature gradients in the lattice subsystem, high stress levels develop in the surface region of the substrate material. In the present study, temperature and stress fields in the substrate material are presented for the case of the laser short-pulse heating of gold. Electron kinetic theory and a two-equation heating model are introduced to account for non-equilibrium energy transport during the laser heating pulse. Laser pulses exponentially decaying with time are accommodated in the simulations. It is found that lattice site temperature gradients attain high values inspite of the low magnitude of the lattice site temperature. This, in turn, results in high stress levels in the surface region of the substrate material. Thermal stress is compressive owing to high thermal strain development and low displacement of the surface.
KaganovM. I.LifshiftzI. M.TanatarovL. V.Relaxation between electrons and crystalline lattice. Sou. Phys. JETP, 1957, 4, 173–178.
2.
LucianiJ. F.MoraP.VirmontJ.Nonlocal heat transport due to steep temperature gradients. Phys. Rev. Lett., 1983, 51, 1664–1667.
3.
EesleyG. L.Generation of nonequilibrium electron and lattice temperatures in copper by picosecond laser pulses. Phys. Rev. B, 1986, 33, 2144–2151.
4.
BrorsonS. D.KazeroonianA.MooderaJ. S.FaceD. W.ChengT. K.IppenE. P.DresselhausM. S.DresselhausG.Femtosecond room-temperature measurement of the electron-phonon coupling constant λ in metallic superconductors. Phys. Rev. Lett., 1990, 64, 2172–2175.
5.
AllenP. B.Theory of relaxation of electrons in metals. Phys. Rev. Lett., 1987, 13, 1460–1463.
6.
KarA.ChanC. L.MazumderJ.Comparative studies on nonlinear hyperbolic heat conduction for various boundary conditions: Analytical and numerical solutions. Trans. ASME, J. Heat Transfer, 1992, 114, 14–20.
7.
WangX. Y.RiffeD. M.LeeY. S.DownerM. C.Time-resolved electron-temperature measurement in a highly excited gold target using femtosecond thermionic emission. Phys. Rev. B, 1994, 50, 8016–8019.
8.
QiuT. Q.TienL.Femtosecond laser heating of multi-layer metals. I: Analysis. Int. J. Heat Mass Transfer, 1994, 37, 2789–2797.
9.
TzouD. Y.A unified field approach for heat conduction from macro-to-microscales. ASME. J. Heat Transfer, 1995, 117, 8–16.
10.
HonnerM.KunnesJ.On the wave diffusion and parallel nonequilibrium heat conduction. Trans. ASME. J. Heat Transfer, 1999, 121, 702–707.
YilbasB. S.Heating of metals at a free surface by laser radiation an electron kinetic theory approach. Int. J. Engng. Sci, 1986, 24 (8), 1325–1334.
13.
YilbasB. S.Electron kinetic theory approach - one-and three-dimensional heating with pulsed laser. Int. Heat and Mass Transfer, 2001, 44, 1925–1936.
14.
YilbasB. S.Shortpulse laser heating of gold-chromium layers: Thermo-elasto-plastic analysis. J. Phys. Part D:Appl. Phys., 2002, 35, 1210–1217.
15.
YilbasB. S.ShujaS. Z.Laser short-pulse heating of surfaces. J. Phys. D: Appl. Phys., 1999, 32, 1947–1954.
16.
YilbasB. S.Entropy production during laser picosecond heating of copper. Trans. ASME. J. Energy Resour. Technol., 2002, 124, 204–213.
17.
YilbasB. S.SamiM.3-Dimensional laser heating including evaporation - a kinetic theory approach. Int. J. Heat and Mass Transfer, 1998, 41 (13), 1969–1981.
18.
YilbasB. S.Electron kinetic theory approach - one-and three-dimensional heating with pulsed laser. Int. Heat and Mass Transfer, 2001, 44, 1925–1936.
19.
YilbasB. S.Laser short-pulse heating of gold-copper two-layer assembly: Elasto-plastic analysis. Jap. J. Appl. Phys., 2002, 41, 5226–5234.
20.
YilbasB. S.SahinA. Z.An approach to convergency of kinetic theory to Fourier theory in relation to laser heating process. Jap. J. Appl. Phys. Part 1, 1993, 32(12A), 5646–5651.
21.
YilbasB. S.Electron kinetic theory approach for picosecond laser pulse heating. Numer. Heat Transfer, 2001, 39, 823–845.
22.
ElperinT.RudinG.Thermo-elasticity problem for a multilayer coating - substrate assembly irradiated by a laser beam. Int. Commun. Heat Mass Transfer, 1996, 23, 133–142.
23.
PaekU.GaglianoF. P.Thermal analysis of laser drilling. IEEE J. Quantum Electronics, 1972, 8, 112–119.
24.
WangH. G.GuanY. H.ChenT. L.ZhangJ. T.A study of thermal stresses during laser quenching. J. Mater. Proc. Technol., 1997, 63, 550–553.
25.
LiK.ShengP.Plane stress model for fracture of ceramics during laser cutting. Int. J. Mach. Tools Mfg, 1995, 35, 1493–1506.
26.
YilbasB. S.SamiM.ShujaS. Z.Laser-induced thermal stresses on steel surface. Optics and Lasers in Engng, 1998, 30, 25–37.
27.
KalyonM.YilbasB. S.Analytical solution for thermal stresses during laser pulse heating process. Proc. Instn Mech. Engrs. Part C:J. Mechanical Engineering Science, 2001, 215, 1429–1445.
28.
YilbasB. S.AgeeliA.Formulation of laser induced thermal stresses: Stress boundary at the surface. Proc. Instn Mech. Engrs. Part C: J. Mechanical Engineering Science, 2003, 217, 423–434.
29.
ArifA. F. M.ShujaS. Z.YibasB. S.Gas assisted laser single pulse heating: Study of thermal stresses. Proc. Instn Mech. Engrs. Part C:J. Mechanical Engineering Science, 2001, 215, 291–306.
30.
YilbasB. S.ArifA. F. M.Material response to thermal loading due to short pulse laser heating. Int. J. Heat and Mass Transfer, 2001, 44, 3787–3798.
31.
KimB. J.FlammaJ.W.Ten HaveE. S.Garcia ParajoM. F.Van HulstN. F.BruggerJ.Moulded photoplastic probes for near-field optical applications. J. Microscopy, 2001, 202, 16.
32.
DetlevR.ElbertJ.Development of thermoplastic calorimeter. Appl. Optics, 1986, 25, 4571–4578.
33.
CahillD. G.GoodsonK.MajumdarA.Thermo-metry and thermal transport in micro/nano scale solid-state devices and structures. Trans. ASME. J. Heat Transfer, 2002, 124, 223–241.
34.
FujimotoJ. G.LiuJ. M.IppenE. P.Femtosecond laser interaction with metallic tungsten and nonequilibrium electron and lattice temperatures. Phys. Rev. Lett., 1984, 53, 1837–1840.
35.
QiuT. Q.TienC. L.Heat transfer mechanisms during short-pulse laser heating of metals. Trans. ASME. J. Heat Transfer, 1993, 115, 835–841.
36.
BatheK. J.Finite Element Procedures, 1996, pp. 148–192 (Prentice-Hall, Englewood Cliffs, New Jersey).
