Constitutive equations for plane stress problems based on the modified form of a non-quadratic yield criterion suitable for aluminium alloy sheet were derived by Barlat et al. to account for the Bauschinger effect (BE). Numerical predictions of spring-back based on the original yield function and its modified form wer performed and compared with the results of draw-bending tests. The results show the necessity of including the BE in the constitutive equations to enhance the accuracy in predicting spring-back.
Barlat F.,Maeda Y.,Chung K.,Yanagawa M.,Brem J. C.,Hayashida Y.,Lege D. J.,Matsui K.,Murtha S. J.,Hattori S.,Becker R. C.,Makosey S..Yield function development for aluminium alloy sheets.J. Mech. Phys. Solids. 1997;45:1727-1763
2.
Banabic D.,Bunge H. J.,Pöhlandt K.,Tekkaya A. E.Formability of Metallic Materials. Berlin, Germany: Springer-Verlag; 2000:
3.
Hill R..A theory of the yielding and plastic flow of anisotropic metals.Proc. R. Soc. Lond.. 1948;A193:281-297
4.
Woodthorpe J.,Pearce R..The anomalous behaviour of aluminium sheet under balanced biaxial tension.Int. J. Mech. Sci.. 1970;12:341-347
5.
Barlat F.,Lian J..Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions.Int. J. Plasticity. 1989;5:51-66
6.
Barlat F.,Lege D. J.,Brem J. C..A six-component yield function for anisotropic materials.Int. J. Plasticity. 1991;7:693-712
7.
Karafillis A. P.,Boyce M. C..A general anisotropic yield criterion using bounds and a transformation weighting tensor.J. Mech. Phys. Solids. 1993;41:1859-1886
8.
Yoon J. W.,Barlat F.,Chung K.,Pourboghrat F.,Yang D. Y..Earing predictions based on asymetric nonquadratic yield function.Int. J. Plasticity. 2000;16:1075-1104
9.
Pourboghrat F.,Chung K.,Richmond O..A hybrid membrane/shell method for rapid estimation of springback in anisotropic sheet metals.Trans. ASME, J. Appl. Mechanics. 1998;65:671-684
10.
Uemori T.,Okada T.,Yoshida F..FE analysis of springback in hat-bending with consideration of initial anisotropy and the Bauschinger effect.Key Engng Mater.. 2000;177-180:497-502
11.
Lee S. W.,Yang D. Y..An assessment of numerical parameters influencing springback in explicit finite element analysis of sheet metal forming process.J. Mater. Process. Technol.. 1998;80-81:60-67
12.
TangS.Trends on simulation of sheet metal forming processes. SAE paper 2000-01-1108, 2000.
13.
NguyenV. T.ChenZ.ThomsonP. F.Elastic-plastic tensor of the tangent modulus based on asymmetric nonquadratic yield function. In Proceedings of the Third Australian Congress on Applied Mechanics, Sydney, Australia, 2002, pp. 87–92.
14.
Prager W..A new method of analyzing stresses and strains in work hardening plastic solids.Trans. ASME, J. Appl. Mechanics. 1956;23:493-496
ArmstrongP. J.FrederickC. O.A mathematical representation of the multiaxial Bauschinger effect. GEGB Report RD/B/N 731, 1966.
17.
Chaboche J. L..Constitutive equations for cyclic plasticity and cyclic viscoplasticity.Int. J. Plasticity. 1989;5:247-302
18.
Hallquist J. O.LS-DYNA Theoretical Manual. Livermore Software Technology Corporation; 1998:
19.
Chen W. F.,Han D. J.Plasticity for Structural Engineers. New York: Springer-Verlag; 1988:
20.
Li K. P.,Carden W. P.,Wagoner R. H..Simulation of springback.Int. J. Mech. Sci.. 2002;44:103-122
21.
Carden W. D.,Geng L. M.,Matlock D. K.,Wagoner R. H..Measurement of springback.Int. J. Mech. Sci.. 2002;44:79-101
22.
NguyenV. T.Internal Report, Department of Materials Engineering, Monash University, Melbourne, Australia, 2000.
23.
Karafillis A. P.,Boyce M. C..Tooling and binder design for sheet metal forming process compensating springback error.Int. J. Mach. Tools Mf.. 1996;36:503-526
24.
Day A. S..An introduction to dynamic relaxation.Engineer. 1965;219:218-221
25.
Wang N. M.,Tang S. C..Analysis of bending effects in sheet metal forming operations.Int. J. Numer. Meth. Engng. 1988;25:253-267
26.
MakinouchiA.NakamachiE.OnateE.WagonerR. H. (Eds) Proceedings of NUMISHEET1993, The Institute of Physical and Chemical Research, Isehara, Japan, 1993.
