On torsional stiffness and natural frequency of bellows

Abstract

Simplified formulae for torsional natural frequencies of bellows are developed using an equivalent thin-walled pipe model. To do this the torsional stiffness of bellows needs to be worked out. The torsional stiffness of bellows is determined using Chien's integration method. Accordingly, the Expansion Joint Manufactures Association (EJMA) formula for torsional stiffness calculation is modified using two different equivalent radii. The torsional natural frequencies of bellows are calculated using the simplified formulae based on the equivalent thin-walled pipe model and the modified formulae for torsional stiffness of bellows. The results from the simplified formuale are verified by those from a finite element (FE) model and good agreement is shown between the simplified formulae and the FE model.

Keywords

bellows torsional vibration natural frequency dynamics

Get full access to this article

View all access options for this article.

References

Standards of the Expansion Joint Manufacturers Association, 7th edition, 1998 (EJMA, New York).

Ting-Xin

Guo

B. L.

Tian-Xiang

Wang

Q. C.

Stresses and fatigue failure of U-shaped bellows. In Metallic Bellows and Expansion Joints—1989, Proceedings of the 1989 ASME Pressure Vessels and Piping Conference, Honolulu, Hawaii, 1989, pp. 13–19.

Osweiller

Design of an expansion joint by a finite element program. In Metallic Bellows and Expansion Joints—1989, Proceedings of the 1989 ASME Pressure Vessels and Piping Conference, Honolulu, Hawaii, 1989, pp. 87–94.

Gerlach

C. R.

Flow-induced vibrations of metal bellows. Trans. ASME, J. Engng for Industry, 1969, 91, 1196–1202.

Jakubauskas

V. F.

Weaver

D. S.

Natural vibrations of fluid filled bellows. Trans. ASME, J. Pressure Vessels Technol., 1996, 118, 484–490.

Ting-Xin

Guo

B. L.

Tian-Xiang

Natural frequencies of U-shaped bellows. Int. J. Pressure Vessels and Piping, 1990, 42, 61–74.

Morishita

Ikahata

Kitamura

Dynamic analysis methods of bellows including fluid-structure interaction. In Metallic Bellows and Expansion Joints—1989, Proceedings of the 1989 ASME Pressure Vessels and Piping Conference, Honolulu, Hawaii, 1989, pp. 149–158.

Jakubauskas

V. F.

Weaver

D. S.

Transverse vibrations of bellows expansion joints. Part I: Fluid added mass. J. Fluids Structs, 1998, 12, 445–456.

Jakubauskas

V. F.

Weaver

D. S.

Transverse vibrations of bellows expansion joints. Part II: Beam model development and experimental verification. J. Fluids Structs, 1998, 12, 457–473.

10.

Broman

G. I.

Jösson

A. P.

Hermann

M. P.

Determining dynamic characteristics of bellows by manipulated beam finite elements of commercial software. Int. J. Pressure Vessels and Piping, 2000, 77, 444–453.

11.

Broman

G. I.

Hermann

M. P.

Jönsson

A. P.

Modelling flexible bellows by standard beam finite elements. Research Report, Department of Mechanical Engineering, University of Karlskrona, Sweden, 1999.

12.

Chien

W. Z.

Torsional stiffness of shells of revolution. Appl. Math. Mechanics, 1990, 11, 403–412.

13.

Weaver

Jr. Timoshenko

S. P.

Young

D. H.

Vibration Problems in Engineering, 5th edition, 1990 (John Wiley, New York).