Plastic deformation and fracture characteristics of Hadfield steel subjected to high-velocity impact loading

Abstract

Abstract

Investigation of the impact behaviour of Hadfield steel has been carried out in a broad range of strain rates from 10⁻³ to 9 × 10³s⁻¹ by means of a servo-hydraulic machine and a compressive split Hopkinson bar. The effects of strain rate on the impact properties, substructure evolution and fracture resistance have been evaluated. The observed stress-strain response is influenced greatly by strain rate, resulting in obvious changes of work hardening rate, strain rate sensitivity and activation volume. This rate-dependent behaviour is in good agreement with model predictions using the Zerilli-Armstrong constitutive law. Dislocation tangle and deformation twin substructures are also found to develop as a function of strain rate. Increasing dislocation and twin densities enhance the work hardening rate and flow strength. Catastrophic failure at high rates results from the formation of localized shear bands. With increasing strain rate, there is an increase in brittle cleavage microfracture, resulting in ductility loss. Microcracking initiates at grain boundaries due to the presence of carbide precipitates.