The equations of particle motion in an elastic isotropic stressed medium are first derived in Cartesian coordinates and then transformed into cylindrical coordinates. The three components of the equations of motion are non-linear partial differential equations and cannot be of use in practical applications. However, noting that the particle displacement is composed of a small dynamic part superimposed on a large static part, these equations are linearized via a simple perturbation method. The linearized equations are presented in closed form. They contain variables, which may be measured and experimented upon in practice, in the field of acoustoelasticity.
ToupinR. A.BernsteinB.Sound waves in deformed perfectly elastic materials; acoustoelastic effect. J. Acoust. Soc. Am., 1961, 33, 216–225.
2.
GreenR. E.Jr.Ultrasonic Investigation of Mechanical Properties, Vol. 3, Treatise on Materials Science and Technology (Ed. HermanH.), 1973 (Academic Press).
3.
MurnaghanT. D.Finite Deformation of an Elastic Solid, 1951 (John Wiley, New York).
4.
DeputatJ.Ultrasonic measurement of residual stresses under industrial conditions. Acoustica, 1993, 79(2), 161–169.
5.
DeputatJ.Kwaszczynska-KlimekA.SzelazekJ.Monitoring of residual stress in railroad wheels with ultrasound. In Proceedings of the 12th World Conference on Non-destructive Testing, Amsterdam, Netherlands, 23–28 April 1989, Vol. 2 (Ed. BoogaardJ.Van DijkG. M.), pp. 974–976 (Elsevier).
6.
MurayamaR.FujisawaK.FukuokaH.HiraoM.YoneharaS.Nondestructive evaluation of material properties with EMAT (formability in cold rolled steel sheets and residual stress in railroad wheel). In IEEE 1989 Ultrasonic Symposium, Montreal, Quebec, Canada, 3–6 October 1989, Vol. 2 (Ed. McAvoyB. R.), pp. 1159–1162 (IEEE).
7.
ClarkA. V.FukuokaH.MitrakovicD. V.MoulderJ. C.Acoustoelastic measurements pertaining to the nondestructive characterization of residual stress in a heat-treated steel railroad wheel. Mater. Evaluation, 1984, 47(7), 835–841.
8.
TalanaE.BourseM.FremiotM.De BellevalJ. F.Determination of near surface residual stresses on welded joints using ultrasonic methods. NDT & E Int., 1995, 28(2), 83–88.
9.
KoboriO.IwashimizuY.Acoustoelastic measurements on stress due to shrinkage fitting. In Residual Stresses–III, Science and Technology, Vol. 1 (Ed. FujiwaraH.AbeT.TanakaK.), 1992, pp. 316–321 (Elsevier Applied Sciences).
10.
FukuokaH.TodaH.Field applications of acoustoelastic stress measurement. In Residual Stresses–III, Science and Technology, Vol. 1 (Ed. FujiwaraH.AbeT.TanakaK.), 1992, pp. 290–297 (Elsevier Applied Sciences).
11.
SrinivasanM. N.ChundaS. N.BrayS. N.AlagarsamyD.Ultrasonic technique for residual stress measurement in ductile iron continuous cast round bars. J. Testing and Evaluation, 1991, 20(5), 331–335.
12.
Leon-SalamancaT.NixonV.Longitudinal and hoop stress effects on the critically refracted longitudinal wave velocity in tempered steel piping. In Pressure Vessels and Piping Conference on NDE: Applications, Advanced Methods, Codes and Standards (Ed. PangbornR. N.), San Diego, California, 23–27 June 1991, PVP-Vol. 216, NDE-Vol. 9, pp. 69–72 (American Society of Mechanical Engineers, New York).
13.
WilbandA.RepplingerW.HubschenG.SalzburgerH. J.EMUS–system for stress and texture evaluation by ultrasound. In 3rd International Symposium on Nondestructive Characterization of Materials, Saarbrucken, Germany, 3–6 October 1988, pp. 681–690.
14.
WolframS.Mathematica 3.1, 1997.
15.
UguralA. C.Stresses in Plates and Shells, 1973, Ch. 2, Sec. 2-2 (Pergamon Press).
