Dynamic simulation and monitoring of a non-contacting flexibly mounted rotor mechanical face seal

Abstract

Mechanical face seal rotor dynamics is investigated through both simulation and real-time monitoring of a non-contacting flexibly mounted rotor (FMR) mechanical face seal in a seal test rig. Dynamic simulation is performed to investigate the seal rotor angular response to the stator misalignment, the stator angle, the initial rotor misalignment and clearance. Rotor angular response orbit is introduced and is able to characterize the rotor dynamic response. A real-time monitoring system is constructed in the test rig to monitor the instantaneous dynamic behaviour of the seal rotor, including its angularresponse, precession angle and angular response orbit. Experimental results agree qualitatively well with those of the dynamic simulation. Potential applications of the monitoring system for detecting seal face contact and for seal control are stated.

Keywords

non-contacting face seal mechanical seal monitoring face seal dynamics dynamic simulation

Get full access to this article

View all access options for this article.

References

Etsion

Mechanical face seal dynamics 1985-1989. The Shock and Vibr. Dig., 1991, 23(4), 3–7.

Green

The rotor dynamic coefficients of coned-face mechanical seals with inward or outward flow. Trans. ASME, J. Tribology, 1987, 109(1), 129–135.

Green

Gyroscopic and damping effects on the stability of a noncontacting flexibly-mounted rotor mechanical face seal. In Proceedings of 2nd International Symposium on Transport Phenomena, Dynamics of Rotating Machinery (Eds Kim

J. H.

Yang

W.-J.

), Hawaii, 1998, 1990, pp. 153–173 (Hemisphere).

Green

Gyroscopic and support effects on the steady-state response of a noncontacting flexibly-mounted rotor mechanical face seal. Trans. ASME, J. Tribology, 1989, 111, 200–208.

Bloch

H. P.

Development and experience with computerized acoustic incipient failure detection (IFD) systems. ASME paper 77-pet-2, 1977.

Kataoka

Yamashina

Komatsu

Development of an incipient failure detection technique for mechanical seals. In Proceedings of 4th International Pump Symposium, Houston, Texas, 1987, pp. 121–129.

Kennedy

F. E.

Grim

J. N.

Observation of contact condition in mechanical face seals. ASLE Trans., 1984, 27(2), 122–128.

Lee

A. S.

Green

Higher harmonic oscillations in a noncontacting FMR mechanical face seal test rig. Trans. ASME, J. Vibr. and Acoust., 1994, 116(2), 161–167.

Lee

A. S.

An experimental investigation of a noncontacting flexibly mounted rotor mechanical face seal. PhD thesis, Georgia Institute of Technology, 1992.

10.

Zou

Green

Clearance control of a mechanical face seal. STLE Trans., 1999, 42(3), 535–540.

11.

Zou

Green

Real-time condition monitoring of mechanical face seal. In Proceedings of 24th Leeds-Lyon Symposium on Tribology, Imperial College, London, 1997, pp. 423–430.

12.

Zou

Dayan

Green

Feasibility of contact elimination of a mechanical face seal through clearance adjustment. ASME Preprint 99-GT-147, Trans. ASME, J. Engng Gas Turbine and Power, 1999, 122(3).

13.

Dayan

Zou

Green

Contact elimination in mechanical face seals using active control. In Proceedings of 7th IEEE Mediterranean Conference on Control and Automation, MED99, Haifa, Israel, 28-30 June 1999.