Some overall considerations for the optimization of the energy chain for the spark ignition engine are briefly discussed and figures given for the relative inhaled energies with different fuels. There follows a description of the nature of turbulent flame propagation in engines, showing the computed characteristics of the burning rate for stoichiometric and lean mixtures at different engine speeds. These reveal the factors influencing partial quenching and misfire. Flame instabilities are shown theoretically to become more important with increasing pressure. The associated flame wrinkling and cellularity increase the burning rate of both laminar and turbulent gaseous flames. Fundamental aspects of the present trend towards the direct injection of gasoline are discussed and the unique instabilities in aerosol combustion are shown to increase the burning velocity above that of the corresponding gaseous mixture. The degree to which evaporative cooling of droplets can enhance the volumetric efficiency is discussed. The onset of autoignition in an engine is calculated with recent shock tube data, which are also used to show that evaporative cooling can increase the knock resistance by about four octane numbers.
The rational utilization of fuels in private transport (RUFIT): extrapolation to the unleaded gasoline case. Concawe ad hoc group ‘RUFIT’ Report 8/80, Den Haag, 1980.
2.
KahsnitzR.Assessment of the energy balances and economic consequences of the reduction and elimination of lead in gasoline. Concawe ad hoc Group Automotive Emissions Fuel Characteristics Report 11/83, Den Haag, 1983.
3.
HeywoodJ. B.Internal Combustion Engine Fundamentals, 1988 (McGraw-Hill, New York).
4.
RodriguezN. M.ChambersA.BakerR. T. K.Catalytic engineering of carbon nanostructures. Langmuir, 1995, 11, 3862.
5.
BrownC. N.LadommatosN.A numerical study of fuel evaporation and transportation in the intake manifold of a port-injected spark-ignition engine. Proc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering, 1991, 205 (D3), 161–175.
6.
LadommatosN.RoseD. W.Results of a computer model of droplet thermodynamic and dynamic behaviour in the port of a port-injected engine. SAE paper 960468, 1996.
7.
DavidW. T.LeahA. S.Fuel economy in petrol engines. Proc. Instn Mech. Engrs, 1940, 143, 289.
8.
LuJ.GuptaA. K.PouringA. A.KeatingE. L.A preliminary study of chemically enhanced autoignition in an internal combustion engine. SAE paper 940758, 1994.
9.
IshibashiY.AsaiM.Improving the exhaust emissions of two-stroke engines by applying the activated radical combustion. SAE paper 960742, 1996.
10.
Van BlariganP.ParadisoN.GoldsboroughS.Homogeneous charge compression ignition with a free piston: a new approach to ideal Otto cycle performance. SAE paper 982484, 1998.
11.
BradleyD.LauA. K. C.LawesM.Flame stretch rate as a determinant of turbulent burning velocity. Phil. Trans. R. Soc. Lond., 1992, A338, 357.
12.
BradleyD.MorleyC.Autoignition in spark-ignition engines. In Low Temperature Combustion and Autoignition (Eds PillingM. J.HancockG.), 1997, Ch. 7, pp. 661–760 (Elsevier).
13.
ArcoumanisC.EnotiadisA. C.WhitelawJ. H.Frequency analysis of tumble and swirl in motored engines. Proc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering, 1991, 205 (D3), 177–184.
14.
ChengW. K.HamrinD.HeywoodJ. B.HochgrebS.MinK.NorrisM.An overview of hydrocarbon emissions mechanisms in spark-ignition engines. SAE paper 932708, 1993.
15.
MalyR. R.State of the art and future needs in S. I. engine combustion. In Proceedings of 25th International Symposium on Combustion, 1994, p. 111 (The Combustion Institute, Pittsburgh).
16.
Abdel-GayedR. G.BradleyD.LawesM.LungF. K.-K.Premixed turbulent burning during the early stages of an explosion. In Proceedings of 21st International Symposium on Combustion, 1988, p. 497 (The Combustion Institute, Pittsburgh).
17.
BradleyD.HicksR. A.LawesM.SheppardC. G. W.WoolleyR.The measurement of laminar burning velocities and Markstein numbers for iso-octane-air and iso-octane-n-heptane-air mixtures at elevated temperatures and pressures in an explosion bomb. Combust. Flame, 1998, 115, 126.
18.
GuX. J.HaqM. Z.LawesM.WoolleyR.Laminar burning velocity and Markstein length measurements for methane-air mixtures. Combust. Flame (to be published).
19.
Abdel-GayedR. G.BradleyD.LungF. K.-K.Combustion regimes and the straining of turbulent premixed flames. Combust. Flame, 1989, 76, 213.
20.
MerdjaniS.SheppardC. G. W.Gasoline engine cycle simulation using the Leeds turbulent burning velocity correlations. SAE Trans., 1993, 102(4), 842.
21.
DaiWenRussS. G.TriguiN.TallioK. V.Regimes of premixed turbulent combustion and misfire modeling in SI engines. SAE paper 982611, 1998.
22.
BechtoldJ. K.MatalonM.Hydrodynamic and diffusion effects on the stability of spherically expanding flames. Combust. Flame, 1987, 67, 77.
23.
BradleyD.Instabilities and flame speeds in large scale premixed gaseous explosions. Phil. Trans. R. Soc. Lond. (to be published).
24.
FarrS. S.Modelling of burn rate in a spark ignition engine. MSc dissertation, Leeds University, 1998.
25.
MetghalchiM.KeckJ. C.Burning velocities of mixtures of air with methanol, iso-octane, and indolene at high pressure and temperature. Combust. Flame, 1982, 48, 191.
26.
GülderO. L.Laminar burning velocities of methanol, ethanol and isooctane-air mixtures. In Proceedings of 19th International Symposium on Combustion, 1982, p. 275 (The Combustion Institute, Pittsburgh).
27.
RyanT. W.LestzS. S.The laminar burning velocity of iso-octane, n-heptane, methanol, methane and propane at elevated temperature and pressures in the presence of a diluent. SAE paper 800103, 1980.
28.
MüllerU. C.BollingM.PetersN.Approximation for burning velocities and Markstein numbers for lean hydrogen and methanol flames. Combust. Flame, 1997, 108, 349.
29.
KobayashiH.NakashimaT.TamuraT.MarutaK.NiiokaT.Turbulence measurements and observations of turbulent premixed flames at elevated pressures up to 3.0 MPa. Combust. Flame, 1997, 108, 104.
30.
KobayashiH.KawabataY.MarutaK.Experimental study on general correlation of turbulent burning velocity at high pressure. In Proceedings of 27th International Symposium on Combustion, 1999, p. 941 (The Combustion Institute, Pittsburgh).
31.
AndersonR. W.YangJ.BrehobD. D.VallanceJ. K.WhiteakerR. M.Understanding the thermodynamics of direct injection spark ignition (DISI) combustion systems: an analytical and experimental investigation. SAE paper 962018, 1996.
32.
TakagiY.A new era in spark ignition engines featuring high pressure direct injection. In Proceedings of 27th International Symposium on Combustion, 1999, p. 2055 (The Combustion Institute, Pittsburgh).
33.
HayashiS.KumagaiS.SakaiT.Propagation velocity and structure of flames in droplet-vapour-air mixtures. Combust. Sci. Technol., 1976, 15, 169.
34.
AtzlerF.LawesM.Burning velocities in droplet suspensions. In Proceedings of 14th International Conference on Liquid Atomization and Spray Systems, 1998, p. 578
35.
AtzlerF.Burning velocities in droplet suspensions. PhD thesis, University of Leeds, 1999.
36.
GreenbergJ. B.McIntoshA. C.BrindleyJ.Instability of a flame front propagating through a fuel-rich droplet-vapour-air cloud. Combust. Theory Modelling, 1999, 3, 567.
37.
FiewegerK.BlumenthalR.AdomeitG.Self-ignition of SI-engine model fuels: A shock-tube investigation at high pressure. Combust. Flame, 1997, 109, 599.
38.
BradleyD.KalghatgiG. T.GolombokM.YeoJ.Heat release rates due to autoignition, and their relationship to knock intensity in spark ignition engines. In Proceedings of 26th International Symposium on Combustion, 1996, p. 2653 (The Combustion Institute, Pittsburgh).
39.
KönigG.MalyR. R.BradleyD.LauA. K. C.SheppardC. G. W.Role of exothermic centres on knock initiation and knock damage. SAE Trans., 1990, 99(4), 840.
40.
PanJ.SheppardC. G. W.A theoretical and experimental study of the modes of end gas autoignition leading to knock in SI engines. SAE Trans., 1994, 103(4), 1925.
41.
MalyR. R.KleinR.PetersN.KönigG.Theoretical and experimental investigation of knock induced surface destruction. SAE paper 900025, 1990.
42.
KleinR.BreitbackH.GeratzK. J.SengerW.Surface erosion by high speed combustion waves. In Proceedings of 25th International Symposium on Combustion, 1995, p. 95 (The Combustion Institute, Pittsburgh).
