Traditional areas of application of fluid power systems are being challenged by alternative forms of energy transmission. In some cases this is because of environmental concerns associated with noise and leakage, in other applications the lack of systematic design methods for synthesizing fluid power systems has led to their replacement by electrical drives. This paper outlines some of the current research studies motivated by these challenges.
BramahJ.Obtaining and applying motive power. HM Patent Office, Pat. 2045, 30 November 1795.
2.
BurrowsC. R.Fluid power systems design—Bramah's legacy. 83rd Thomas Hawksley Memorial Lecture, presented 13 December 1995. Proc. Instn Mech. Engrs, Part A, Journal of Power and Energy, 1996, 210 (A2), 105–120.
3.
PippengerJ. P.Fluid Power the Hidden Giant, 1992 (Amalgam).
4.
McNeilI.Hydraulic power transmission. Engng Heritage, 1967, 1, 89–95 (Institution of Mechanical Engineers, London).
5.
McNeilI.Hydraulic Power, 1972 (Longman, London).
6.
BlackburnJ. F.ReethofG.ShearerJ. L.Fluid Power Control, 1960 (MIT Press, Cambridge, Massachusetts).
7.
BurrowsC. R.Design methods for hydraulic circuits. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 30–46.
8.
NyquistH.Regeneration theory. Bell Syst. Tech. J., January 1932, 2, 126–147.
9.
EdgeK. A.The control of fluid power systems—responding to the challenges. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1997, 211 (12), 91–110.
10.
KoskiR. E.Fluid power education—what went wrong? In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 71–92.
11.
New research consortium, NFPA Reporter, July-August 1998, 2–4.
12.
BurrowsC. R.Fluid power—progress in a key technology. Jap. Soc. Mech. Engrs Int. J. B, 1994, 37 (4), 691–701.
13.
BlackburnJ. F.ReethofG.ShearerJ. L.Fluid Power Control, 1960, Ch. 18 (HoffmanT. E.), pp. 631–646 (MIT Press, Cambridge, Massachusetts).
14.
IvantysynovaM.KunzeO.BergH.Energy saving hydraulic systems in aircraft—a way to save fuel. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 1000–1014.
15.
BurrowsC. R.JonesN. B.ShieldsR. J.A cost minimization approach to the design of fluid power circuits. Proc. Instn Mech. Engrs, 1976, 190, 105–113.
16.
BackéW.The present and future of fluid power. 80th Thomas Hawksley Memorial Lecture, 8 December 1993. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 207(14), 193–212.
17.
JongebloedH.BackéW.The functioning effectively of O-ring seals under dynamic load. In Fluid Power Systems. Proceedings of Ninth Bath International Fluid Power Workshop, University of Bath, 7-11 September 1996 (Eds BurrowsC. R.EdgeK. A.), pp. 260–273 (Research Studies Press).
18.
LemrickM.Prevent rather than cure. In Hydraulics and Pneumatics, December 1998, pp. 29–30 (Karntech).
19.
VaughanN. D.WhitingI. M.Use of pulse-width modulation pressure control for hydraulic valves. In Fluid Power Components and Systems. Proceedings of Second Bath International Fluid Power Workshop, 21-22 September 1989 (Eds BurrowsC. R.EdgeK. A.), pp. 25–41 (Research Studies Press).
20.
IkebeY.NakadaT.On a piezo-electric flapper type servo valve operated by a PWM signal. Trans. ASME, J. Dynamic Syst., Measmt and Control, 1974, 96, 88–94.
21.
HouY.BurtonR.SchoenauG.MutoT.Feasibility study on the development of an ultra high-speed, on-off valve. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September, 1995, pp. 659–672.
22.
BurrowsC. R.MedlandA. J.ChawdhryP. K.TomlinsonS. P.TwymanB. R.An integration of fluid power and kinematic synthesis software for system design. In Proceedings of Third JHPS International Symposium on Fluid Power (Ed. ArakiK.), 1966, pp. 485–490 (Japan Hydraulics and Pneumatics Society).
23.
MedlandA. J.MullineuxG.RentoulA. H.TwymanB. R.A constraint-based approach to the design and optimisation of mechanism systems. In Proceedings of IUTAM Symposium on Optimisation of Mechanical Systems, Stuttgart 1995.
24.
RichardsC. W.TilleyD. G.TomlinsonS. P.BurrowsC. R.Bathfp—a second generation package for fluid power systems. In Proceedings of 9th BHRA International Symposium on Fluid Power, Cambridge, 1990, pp. 311–322.
25.
BurrowsC. R.TomlinsonS. P.HoganP. A.Use of computer simulation in the design and selection of critical components in fluid power systems. SAE Trans., Commercial Veh.; in Proceedings of International SAE Off-Highway and Powerplant Congress and Exposition, Milwaukee, Wisconsin, September 1991, paper 911865, pp. 91–98.
26.
BurrowsC. R.Computer tools for the design of fluid power systems. In Proceedings of 3rd Scandinavian International Conference on Fluid Power, Linköping, May 1993, pp. 27–51.
27.
BurtonR.SargentC.The use of expert systems in the design of single and multi-load circuits. In Proceedings of 2nd International Conference on ICFP Fluid Power Transmission and Control, Hangzhou, 1989, paper 6.3, pp. 605–610 (International Academic Publishers).
28.
LeeC. L.IyengarG.KotaS.Automated configuration design of hydraulic systems. In Artificial Intelligence in Design (Ed. GeroJ. S.), 1992, pp. 61–82 (Kluwer, Dordrecht).
29.
LenatD. B. In The Role of Heuristics in Learning by Discovery: Three Case Studies in Machine Learning, an Artificial Intelligence Approach (Eds MichelskiR. S.CarbonellJ. E.MitchellT. M.), 1983, pp. 243–306 (Tiaga).
30.
FujitaK.AkagiS.SasakiM.Adaptive synthesis of hydraulic circuits from design cases based on functional structure. In Proceedings of ASME Design Engineering Technical Conference, Sacramento, 1995, Vol. 1, pp. 875–882.
31.
DarlingtonM.PotterS.CulleyS. J.ChawdhryP. C.Cognitive theory as a guide to automating the configuration design process. In Artificial Intelligence in Design (Eds GeroJ. S.SudweeksF.), 1998 (Kluwer, Dordrecht).
32.
KrusP.JanssonA.PalmbergJ.-O.Optimisation for component selection in hydraulic systems. In Fluid Power Systems Modelling and Control. Proceedings of Fourth Bath International Fluid Power Workshop, University of Bath, September 1991 (Eds BurrowsC. R.EdgeK. A.), 1991, pp. 219–231 (Research Studies Press).
33.
BoxM. J.A new method of constrained optimisation and a comparison with other methods. Comput. J., 1965, 8, 42–52.
34.
DonneM. S.TilleyD. G.RichardsC. W.Adaptive search and optimisation techniques in fluid power systems design. In Proceedings of Conference on Adaptive Computing in Engineering Design and Systems Control, University of Plymouth, 21-22 September 1994, pp. 67–76.
35.
DonneM. S.TilleyD. G.RichardsC. W.The use of multi-objective parallel genetic algorithms to aid fluid power system design. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1995, 209 (11), 53–61.
36.
ConnorA. M.TilleyD. G.A Tabu search method for the optimization of fluid power circuits. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1998, 212 (15), 373–381.
37.
SeabrookC.BurrowsC. R.Water hydraulics—some design challenges. In Proceedings of ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 1994.
38.
SamlandU.HollingworthB.The use of new materials in water hydraulics. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 955–964.
39.
InoueK.TeradkaT.ItohT.UrataE.Development of a novel water hydraulic pump. In Bath Workshop on Power Transmission and Motion Control (PTMC 98) (Eds BurrowsC. R.EdgeK. A.), 1998, pp. 19–28 (Professional Engineering Publishing, Bury St Edmunds and London).
40.
BrookesC. A.FaganM. J.JamesR. D.McConnachieJ.The selection and performance of ceramic components in a sea water pump. In Proceedings of Third JHPS International Symposium on Fluid Power (Ed. ArakiK.), 1996, pp. 3–12 (Japan Hydraulics and Pneumatics Society).
41.
YamashinaCMiyakawaS.UrataE.Development of water hydraulic cylinder position control system. In Proceedings of Third JHPS International Symposium on Fluid Power (Ed. ArakiK.), 1996, pp. 61–66 (Japan Hydraulics and Pneumatics Society).
42.
UrataE.MiyakawaS.YamashinaC.Hydrostatic supported spool for water hydraulic servo valves—its influence on flapper-nozzle characteristics. In Proceedings of 4th Scandinavian International Conference on Fluid Power, 1995, pp. 910–929.
43.
KoskinenK. T.VileniusM. J.VirvaloT.MäkinenE.Water as a pressure medium in position servo systems. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 859–871.
44.
FeldmanD. G.HinrichsJ.About the potential of biodegradable fluids to replace mineral oil in heavily loaded hydrostatic transmissions. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 805–813.
45.
RoosenK.BackéW.Development and investigation of an energy-saving hydraulic linear drive. In Fluid Power Engineering: Challenges and Solutions. Proceedings of Tenth Bath International Fluid Power Workshop, 10-12 September 1997 (Eds BurrowsC. R.EdgeK. A.), pp. 161–180 (Research Studies Press).
46.
BackéW.KöglC.Secondary controlled motors in speed and torque control. In Proceedings of Second JHPS International Symposium on Fluid Power, Tokyo, September 1993 (Ed. MaedaT.), pp. 241–248 (E & N Spon, London).
47.
PostW. J. A. E. M.van der BurgtJ. A. H.Energy saving and system optimisation in cyclic loaded hydraulic power transmissions. In Innovations in Fluid Power. Proceedings of Seventh Bath International Fluid Power Workshop, 21-23 September 1994 (Eds BurrowsC. R.EdgeK. A.), pp. 55–70 (Research Studies Press).
48.
NewtonD. A.Application of neural network controller to control a rotary drive system with high power efficiency. In Innovations in Fluid Power. Proceedings of Seventh Bath International Fluid Power Workshop, 21-23 September 1994 (Eds BurrowsC. R.EdgeK. A.), pp. 41–54 (Research Studies Press).
49.
BurrowsC. R.HammondE. P.McManusM. C.Life-cycle assessment of oil. Hydraulic systems for environmentally sensitive applications. In Proceedings of ASME International Mechanical Engineering Congress and Exposition, Annaheim, 15-20 November 1998, Vol. 5, pp. 61–68, (FSPT).
50.
RichardsC. W.TilleyD. G.TomlinsonS. P.BurrowsC. R.Type insensitive integration codes for the simulation of fluid power systems. In Proceedings of ASME Winter Annual Meeting, Texas, 1990.
51.
KrusP.JanssonA.PalmbergJ.-O.WeddfeltK.Distributed simulation of hydromechanical systems. In Computers in Fluid Power. Proceedings of Third Bath International Fluid Power Workshop, 13-14 September 1990 (Eds BurrowsC. R.EdgeK. A.), pp. 228–250 (Research Studies Press).
52.
AkhtarzadS.JohnsP. B.The solution of Maxwell's equations in 3 space dimensions and time by the TLM method of numerical analysis. Proc. IEE, 1975, 122 (12), 1344–1348.
53.
SidellR. S.WormleyD. N.An efficient simulation method for distributed-lumped fluid networks. Trans. ASME, J. Dynamic Syst., Measmt and Control, 1977, 99, 34–40.
54.
BoucherR. F.KitsiosE. E.Simulation of fluid network dynamics by transmission line modelling. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1986, 200 (C1), 21–29.
55.
PollmeierK.BurrowsC. R.EdgeK. A.Partitioned simulation of fluid power systems. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1996, 210 (14), 221–230.
56.
SanadaK.RichardsC. W.LongmoreD. K.JohnstonD. N.BurrowsC. R.Practical requirements for modelling the dynamics of hydraulic pipelines. In Proceedings of Second JHPS International Symposium on Fluid Power, Tokyo, September 1993 (Ed. MaedaT.), pp. 657–664 (E & N Spon, London).
57.
SanadaK.RichardsC. W.LongmoreD. K.JohnstonD. N.A finite element model of hydraulic pipelines using an optimised interlacing grid system. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1993, 207 (14), 213–222.
58.
JohnstonD. N.LongmoreD. K.DrewJ. E.A technique for the measurement of the transfer matrix characteristics of two-port hydraulic components. In Proceedings of ASME Winter Annual Meeting, Chicago, November 1994.
59.
TaylorS. E. M.JohnstonD. N.LongmoreD. K.Modelling of transient flow in hydraulic pipelines. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1997, 211 (16), 447–456.
60.
TaylorS. E. M.JohnstonD. N.LongmoreD. K.Experimental validation of pipeline models for laminar and turbulent transient flow. In Proceedings of ASME International Mechanical Engineering Congress and Exposition, Dallas, 1997, Vol. 4, pp. 99–104 (FPST).
61.
LongmoreD. K.SchlesingerA.Transmission of vibration and pressure fluctuations through hydraulic hoses. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1991, 205 (12), 97–104.
62.
LongmoreD. K.SchlesingerA.Relative importance of the various vibration transmitting mechanisms in hoses in typical hydraulic systems. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1991, 205 (12), 105–111.
63.
DrewJ. E.LongmoreD. K.JohnstonD. N.Theoretical analysis of pressure and flow ripple in flexible hoses. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1998, 212 (16), 405–422.
64.
DrewJ. E.LongmoreD. K.JohnstonD. N.Measurement of the longitudinal transmission characteristics of fluid-filled hoses. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1997, 211 (13), 219–228.
65.
DrewJ. E.LongmoreD. K.JohnstonD. N.The systematic design of low noise power steering systems. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 1195–1206.
66.
EdgeK. A.JohnstonD. N.The 'secondary source' method for the measurement of pump pressure ripple characteristics, Part 1: Description of method, Part 2: Experimental results. Proc. Instn Mech. Engrs, Part A, Journal of Power and Energy, 1990, 204(A1), 33–40 and 41–46.
67.
JohnstonD. N.EdgeK. A.The impedance characteristics of fluid power components: Restriction and flow control valves. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1991, 205 (11), 3–10.
68.
EdgeK. A.JohnstonD. N.The impedance characteristics of fluid power components: Relief valves and accumulators. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1991, 205 (11), 11–22.
69.
LauK. K.JohnstonD. N.EdgeK. A.Fluid-borne noise characteristics of hydraulic filters and silencers. In Innovations in Fluid Power. Proceedings of Seventh Bath International Fluid Power Workshop, 21-23 September 1994 (Eds BurrowsC. R.EdgeK. A.), pp. 242–259 (Research Studies Press).
70.
EdgeK. A.LaiY.Reduction of piston pump pressure ripple. In Proceedings of 2nd International Conference on Fluid Power Transmission and Control, Zejiang University, China, 1989, pp. 779–784.
71.
KwongA. H. M.EdgeK. A.A method to reduce noise in hydraulic systems by optimizing pipe clamp locations. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1998, 212 (14), 267–280.
72.
ItoK.InoueK.SaitoK.Visualisation and detection of cavitation in V-shaped groove type valve plate of an axial piston pump. In Proceedings of Third JHPS International Symposium on Fluid Power (Ed. ArakiK.), 1996, pp. 67–72 (Japan Hydraulics and Pneumatics Society).
73.
MittwollenN.Hydraulic simulation of cavitation-induced pressure fluctuations with peculiar periodicities in a fluid power unit. Design and Performance. Proceedings of Eighth Bath International Fluid Power Workshop, 20-22 September 1995 (Eds BurrowsC. R.EdgeK. A.), pp. 156–165 (Research Studies Press).
74.
Nguyen-SchaeferH.Flow-induced noise in a hydraulic plunger pump. In Proceedings of Bath Workshop on Power Transmission and Control (PTMC 98), September 1998 (Eds BurrowsC. R.EdgeK. A.), pp. 219–231 (Professional Engineering Publishing, Bury St Edmunds and London).
75.
SatoS.KumeS.KobayashiK.Non-linear observer of electro-hydraulic servo-motor. In Computers in Fluid Power. Proceedings of Third Bath International Fluid Power Workshop, 13-14 September 1990 (Eds BurrowsC. R.EdgeK. A.), pp. 63–81 (Research Studies Press).
76.
ThauF. E.Observing the state of non-linear dynamic systems. Int. J. Control, 1973, 17, 471–479.
77.
PlummerA. R.VaughanN. D.Decoupling pole placement control, with application to a multi-channel electro-hydraulic servo-system control. Engng Pract., 1997, 5 (3), 313–323.
78.
MaréJ.-C.LaffitteJ.-M.A study of the different pole placement strategies for position control of hydraulic actuators. In Proceedings of 4th Scandinavian International Conference on Fluid Power, Tampere, 26-29 September 1995, pp. 147–159.
79.
KleinA.BackéW.An intelligent optimisation of a state loop controller with fuzzy set logic. In Circuit, Component and System Design. Proceedings of Fifth Bath International Fluid Power Workshop, 16-18 September 1982 (Eds BurrowsC. R.EdgeK. A.), pp. 381–399 (Research Studies Press).
80.
LenneviJ.PalmbergJ.-O.Application and implementation of LQ design method for the velocity control of hydrostatic transmissions. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1995, 209 (14), 225–268.
81.
DaleyS.Application of a fast tuning control algorithm to a hydraulic test rig. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1987, 201 (C4), 285–295.
82.
PlummerA. R.VaughanN. D.Robust adaptive control for hydraulic servo systems. Trans. ASME, J. Dynamic Syst., Measmt and Control, June 1996, 118, 237–244.
83.
BouhalA.RichardE.ScavardaS.ThomassetD. In Circuit Component and System Design. Proceedings of Fifth Bath International Fluid Power Workshop, 16-18 September 1992 (Eds BurrowsC. R.EdgeK. A.), pp. 315–333 (Research Studies Press).
84.
ScavardaS.Some theoretical aspects and recent developments in pneumatic positioning systems. In Proceedings of Second JHPS International Symposium on Fluid Power (Ed. MaedaT.), 1993, pp. 29–48 (E & N Spon, London).
85.
HintonC.The control of servo-hydraulic materials testing machines. In Proceedings of IMechE Discussion Meeting on Adoptive Control of Hydraulic Systems, London, April, 1992.
86.
KoskoB.Fuzzy thinking—the New Science of Fuzzy Logic, 1994, p. 141 (Flamingo).
87.
ZadehL. A.Fuzzy sets. Information and Control, 1965, 8, 338–353.
88.
DeaconM.BraceC.J.VaughanN. D.BurrowsC. R.HorrocksR. W.Impact of alternative controller strategies on exhaust emissions from an integrated diesel/continuously variable transmission power train. Proc. Instn Mech. Engrs, Part D, Journal of Automobile Engineering, 1999, 213 (D2), 95–107.
89.
DeaconM.BraceC. J.GuebeliM.VaughanN. D.BurrowsC. R.DoreyR. E.A modular approach to the computer simulation of a passenger car power train incorporating a Diesel engine and continuously variable transmission. In Proceedings of IEE International Conference on Control, University of Warwick, 1994 (Institution of Electrical Engineers).
90.
NewtonD. A.Design and implementation of a neural network-controlled electro-hydraulic drive. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1994, 208 (11), 31–42.
91.
LeT. T.WattonJ.PhamD. T.Artificial neural network-based approach to fault diagnosis and classification of fluid power systems. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1997, 211 (14), 307–317.
92.
CrowtherW. J.EdgeK. A.BurrowsC. R.WoollonsD. J.Fault diagnosis of a hydraulic actuator circuit using neural networks—an output vector space classification approach. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1998, 212 (11), 57–68.
93.
VaughanN. D.GambleJ. B.Sliding mode control of a proportional solenoid valve. In Fluid Power Systems Modelling and Control. Proceedings of Fourth Bath International Fluid Power Workshop, University of Bath (Eds BurrowsC. R.EdgeK. A.), pp. 95–108 (Research Studies Press).
94.
GambleJ. B.VaughanN. B.Comparison of sliding mode control with state feedback and PID control applied to a proportional valve. Trans. ASME, J. Dynamic Syst., Measmt and Control, September 1996, 118 (3), 434–438.
95.
PannettR. F.ChawdhryP. K.BurrowsC. R.Alternative robust control strategies for disturbance rejection in fluid power. In Proceedings of American Control Conference, San Diego, California, June 1999, pp. 739–743 (Session on Control of Electrohydraulic Systems).
96.
PicheR.PohjolainenS.VirvaloT.Design of robust controllers for position servos using H-infinity theory. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1991, 205 (14), 299–306.
97.
PicheR.PohjolainenS.VirvaloT.Design of robust two-degree of freedom controllers for position control servos using H-infinity theory. Proc. Instn Mech. Engrs, Part I, Journal of Systems and Control Engineering, 1992, 206 (12), 135–142.
NjabelekeI. A.PannettR. F.ChawdhryP. K.BurrowsC. R.Design of H-infinity loop-shaping controllers for fluid power transmission. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science (accepted).
