Experiments are described in which the edge of a hard wedge is loaded against the periphery of a rotating disc of softer specimen material. The normal and frictional forces and inward movement of the wedge as the disc wears are continually monitored throughout a test. The results obtained are used together with measurements of the wearing surfaces of metallographic sections to test a newly proposed wear model. In this model it is assumed that ratchetting causes failure of the surface and hence the production of wear particles, while low-cycle fatigue determines the crack propagation rate and hence the wear rate.
ChallenJ. M.McLeanL. J.OxleyP. L. B.Plastic deformation of a metal surface in sliding contact with a hard wedge: Its relation to friction and wear. Proc. R. Soc. Lond., 1984, A394, 161–181.
2.
MoalicH.FitzpatrickJ. A.TorranceA. A.The correlation of the characteristics of rough surfaces with their friction coefficients. Proc. Instn Mech. Engrs, 1987, 201 (C5), 321–329.
3.
JohnsonK. L.Contact Mechanics, 1987 (Cambridge University Press).
4.
ChallenJ. M.OxleyP. L. B.HockenhullB. S.Prediction of Archard's wear coefficient for metallic sliding friction assuming a low cycle fatigue wear mechanism. Wear, 1986, 111, 275–288.
5.
YangY.TorranceA. A.OxleyP. L. B.Modelling mechanical wear processes in metallic sliding friction. J. Phys. D, Appl. Phys., 1996, 29, 600–608.
6.
KapoorA.A re-evaluation of the life to rupture of ductile metal by cyclic plastic strain. Fatigue, Fract. Engng Mater. Struct., 1994, 17, 201–209.
7.
KopalinskyE. M.OxleyP. L. B.An investigation of the mechanics of sliding metallic wear under lubricated conditions. Wear, 1998, 214 (1), 38–46.
8.
HockenhullB. S.KopalinskyE. M.OxleyP. L. B.An investigation of the role of low cycle fatigue in producing surface damage in sliding metallic friction. Wear, 1991, 148, 135–146.
9.
YangY.TorranceA. A.Wear by plastic ratchetting: An experimental evaluation. Wear, 1996, 196, 147–155.
10.
BlackA. J.KopalinskyE. M.OxleyP. L. B.Sliding metallic wear test with in-process wear measurement: A new approach to collecting and applying wear data. Wear, 1996, 200, 30–37.
11.
SureshS.Fatigue of Materials, 1991 (Cambridge University Press).
12.
KapoorA.JohnsonK. L.Plastic ratchetting as a mechanism of metallic wear. Proc. R. Soc. Lond., 1994, A445, 367–381.
13.
KapoorA.JohnsonK. L.WilliamsJ. A.A model for the mild ratchetting wear of metals. Wear, 1996, 200, 38–44.
14.
KapoorA.Wear by plastic ratchetting. Wear, 1997, 212, 119–130.
15.
TorranceA. A.The influence of surface deformation on mechanical wear. Wear, 1996, 200, 45–54.
16.
RigneyD. A.Comments on the sliding wear of metals. Tribology Int., 1997, 30, 361–367.
