In this paper, a comprehensive computer model is described which can be used to predict the volu- metric errors from the parametric errors of the coordinate measuring machine (CMM) and its probing system, for most configurations of CMMs. Several sets of previously unpublished rules have been derived to transform the CMM parametric errors into a corresponding volumetric error map. Thus a virtual CMM has been developed, implementing the integrated volumetric error model. The developed system has been applied to two practical configurations of CMM, in order to demonstrate the performance and practical application of the system.
HockenR.SimpsonJ.A.BorchardtB.LazarJ.ReeveC.SteinP.Three dimensional metrology. Ann. CIRP, 1977, 26(2), 403–408.
2.
ZhangG.CharltonT.BorchardtB.HockenR.Error compensation of coordinate measuring machines. Ann. CIRP, 1985, 34(1), 445–448.
3.
KunzmannF.TrapetE.WäldeleF.A uniform concept for calibration, acceptance test, and periodic inspection of coordinate measuring machines using reference objects. Ann. CIRP, 1990, 39(1), 561–564.
4.
PahkH.Computer aided volumetric error calibration of coordinate measuring machines. PhD thesis, University of Manchester Institute of Science and Technology, 1990.
5.
BS 6808: 1987 Coordinate Measuring Machines; Part 1: Glossary of Terms; Part 2: Methods for Verifying Performance; Part 3: Code of Practice, 1987 (British Standards Institution, London).
6.
ANSI/ASME B89.1.12M-1990 An American Standard, Methods for Performance Evaluation of Coordinate Measuring Machines, 1990 (American Society of Mechanical Engineers, New York).
7.
PeggsG.Traceability for coordinate measurement technology. In Proceedings of the 28th International MATADOR Conference, Manchester, 1990, pp. 463–468.
8.
KunzmannH.TrapetE.WäldeleF.Concept for traceability of measurements with coordinate measuring machines. In Proceedings of 7th International Seminar on Precision Engineering (Ed. IkawaN.), 1993, pp. 40–52 (Butterworth-Heinemann, Oxford).
