Three-dimensional welding has the ability to produce strong, fully dense metal parts in layers. Adaptation of a weld cladding technique has enabled the production of parts wider than normally possible from single beads. However, high heat inputs during welding could affect part quality. Simple temperature control techniques help improve surface finish. A number of parts were made incorporating temperature control. Results show that, although improvements have been made, corresponding time penalties can have a significant influence on build time. Descriptions of the welding system and temperature control technique are included as well as the surface measurement and residual stress assessment techniques used. Results of temperature versus time, surface finish versus temperature and temperature versus residual stress are presented and discussed.
McAninchM. D.ConrardyC. C.Shape melting–a unique near-nett shape manufacturing process. Weld. Rev. Int., 1991, 10, 33–40 (Argus Business Media Limited, New Jersey).
2.
SpencerJ. D.DickensP. M.Production of metal parts featuring heavy sections using 3D welding. In Proceedings of First National Conference on Rapid Prototyping and Tooling Research (Ed. BennettG.), Buckinghamshire College, 6–7 November 1995, pp. 127–137 (Mechanical Engineering Publications, London).
3.
DickensP. M.CobbR. C.GibsonI.PridhamM. S.Rapid prototyping using 3D welding. J. Des. Mfg, 1993, 1, 39–44 (Chapman and Hall, London).
4.
AyresP. S.EdmondsN.HartwigD. D.MerekD. E.WeberC. M.Method and apparatus for controlling weld bead shape to eliminate microfissure defects when shape melting austinitic materials. US Pat. 4,782,206, 1 November 1988.
5.
DoyleT. E.RyanP. M.Method and apparatus for automatic vapour cooling when shape melting a component. US Pat. 4,857,694, 15 August 1989.
6.
WeberC. M.DingmanB. M.Robotic manufacture of near net shape components by the shape melting process. In 9th International Conference on Vacuum Metallurgy; Special Melting and Processing Technologies, San Diego, California, April 1988, pp. 801–821 (American Vacuum Society).
7.
MorikiY.TaskahashiI.SakuraiM.Metal build-up apparatus with improved cooling means. US Pat. 4,233,487, 11 November 1980.
8.
GeisselerM.Method and apparatus for producing a substantially cylindrical hollow article. US Pat. 4,660,756, 28 April 1987.
9.
MorrisR. A.LukensW. E.ZanisC. A.Weld metal cooling rate indicator system. US Pat. 4,555,614, 26 November 1985.
10.
LancasterJ. F.Metallurgical effects of the weld thermal cycle: Contraction and residual stress. In Metallurgy of Welding, 5th edition, 1994, pp. 159–162 (Chapman and Hall, London).
11.
KalligarakisK.MellorB. G.Double spiral overlay welding–an alternative to single and multilayer techniques. In Welding and Metal Fabrication, 1992, Vol. 60, pp. 277–280 (International Trade Publications Limited, UK).
12.
BatesB. E.HardtD. E.A real-time calibrated thermal model for closed-loop weld bead geometry control. J. Dynamic Systems, Measmt, and Control, 1985, 107, 25–33 (American Society of Mechanical Engineers, New York).
13.
MillionK.DattaR.ZimmermannH.Method and manufacture of a design piece by form creating deposition welding and a design piece manufactured by this method. Eur. Pat. Application 85104225.9, 26 February 1986.
14.
SuttonR.Design of an optical system for the measurement of weld bead profiles. BEng Dissertation, The University of Nottingham, 1996.
15.
RuddC. O.Nondestructive and semidestructive methods for residual stress measurement. In Proceedings of Symposium on Residual Stress Effects in Fatigue 1982, Phoenix, Arizona, 1982, Vol. 776, pp. 3–5 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
16.
ASTM Standard E 837–94 Standard Test Method for Determining Residual Stresses by the Hole Drilling Strain Gauge Method, May 1994 (American Society for Testing and Materials, Philadelphia, Pennsylvania).
17.
WellsA. A.Heat flow in welding. Weld. J., Weld. Res. Suppl., May 1952, 21, 263–267 (The American Welding Society, New York).
18.
CoeF. R.Welding procedures for different steel types. In Welding Steels Without Hydrogen Cracking, 1973, pp. 24–39 (The Welding Institute, Cambridge, UK).
