The current paper focuses on the continuous dynamic recrystallization phenomena (CDRX) occurring in friction stir welding processes of AA6082 T6 aluminium alloys. In particular, in order to predict the average grain size, a properly trained neural network is linked to the finite element method (FEM) model of the process. The utilized net, which takes as inputs the local values of strain, strain rate, and temperature, was trained starting from experimental data and numerical results. The obtained results show the capability of the artificial intelligence (AI) technique in conjunction with the FE tool to predict the final microstructure in the joint section.
ShigematsuI.KwonY. J.SuzukiK.ImaiT.SaitoN.Joining of 5083 and 6061 aluminum alloys by friction stir weldingJ. Mater. Sci. Lett., 2003, 22, 343–356.
6.
LeeW. B.YeonY. M.JungS. B.The improvement of mechanical properties of friction-stir-welded A356 Al alloyMater. Sci. Engng, 2003, A355, 154–159.
7.
LiuG.MurrL. E.NiouC. S.McClureJ. C.VegaF. R.Micro-structural aspects of the friction-stir welding of 6061-T6 aluminum alloyScripta Mater., 1997, 37, 355–361.
8.
SongM.KovacevicR.Thermal modeling of friction stir welding in a moving coordinate system and its validationInt. J. Machine Tools Mf, 2003, 43, 605–615.
9.
SchmidtH.HattelJ.WertJ.An analytical model for the heat generation in friction stir weldingModeling Simulation Mater. Sci. Engng, 2004, 12, 143–157.
10.
ChaoY. J.QiX.TangW.Heat transfer in friction stir welding - experimental and numerical studiesTrans. ASME, 2003, 125, 138–145.
11.
ChenC. M.KovacevicR.Finite element modeling of friction stir welding - thermal and thermomechanical analysisInt. J. Machine Tools Mf, 2003, 43, 1319–1326.
12.
LockwoodW. D.ReynoldsA. P.Simulation of the global response of a friction stir weld using local constitutive behaviorMater. Sci. Engng, 2003, A339, 35–42.
13.
XuS.DengX.Two and three dimensional finite element models for the friction stir welding process. In Proceedings of the 4th International Symposium on Friction Stir Welding, Park City, 2003.
14.
XuS.DengX.A three-dimensional model for the friction-stir welding process. Proceedings of the 21th Southestern Conference on Theoretical and Applied Mechanics, Orlando, 2002.
BarcellonaA.BuffaG.FratiniL.Process parameters analysis in friction stir welding of AA6082-T6 sheets. Keynote paper of the VII ESAFORM Conference, Trondheim, 2004, pp. 371–374.
21.
DEFORM 3D V5.0 user's manual, 2004 (SFC, Columbus, OH).
22.
ASM speciality handbook, aluminum and aluminum alloys, 1993 (ASM International, Ohio). (Editor DavisJ. R., Davis and Associates).
23.
FratiniL.BeccariS.BuffaG.Friction stir welding fem model improvement through inverse thermal characterizationTrans. NAMRI/SME, 2005, XXXIII, 259–266.
24.
LenardJ. G.PietrzykM.CserL.Mathematical and physical simulation of the properties of hot rolled products, 1999 (Elsevier).
25.
VandermeerR. A.JensenJuul D.Microstructural path and temperature dependence of recrystallization in commercial aluminumActa Mater., 2001, 49, 2083–2094.
26.
McQueenH. J.RyanN. D.Constitutive analysis in hot workingMater. Sci. Engng, 2002, A322, 43–63.
27.
FuL.Neural networks in computer intelligence, 1994, (McGraw Hill, New York).
