In this paper the results of an experimental investigation into the local mechanical and morphological characterization of AA6082-T6 friction stir-welded (FSW) butt joints are illustrated. The softening effects of the welding process are highlighted through the use of micro-indentation tests on the top surface of the specimens. The effect of post-welding heat treatments was investigated, also.
LiuH. J.FujiiH.MaedaM.NogiK.Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy. J. Mater. Proc. Technol., 2003, 142, 692–696.
2.
RhodesC. G.MahoneyM. W.BingelW. H.SpurlingR. A.BamptonC. C.Effects of friction stir welding on microstructure of 7075 aluminum. Scripta Mater., 1987, 36(1), 69–75.
ShigematsuI.KwonY. J.SuzukiK.ImaiT.SaitoN.Joining of 5083 and 6061 aluminum alloys by friction stir welding. J. Mater. Sci. Lett., 2003, 22, 343–356.
5.
LeeW. B.YeonY. M.JungS. B.The improvement of mechanical properties of friction-stir-welded A356 Al alloy. Mater. Sci. Engng, 2003, A355, 154–159.
6.
LiuG.MurrL. E.NiouC. S.McClureJ. C.VegaF. R.Micro-structural aspects of the friction-stir welding of 6061-T6 aluminum alloy. Scripta Mater., 1997, 37, 355–361.
7.
BarcellonaA.BuffaG.FratiniL.Process parameters analysis in friction stir welding of AA6082-T6 sheets. Keynote paper of the VII ESAFORM Conference, 2004, pp. 371–374.
8.
EricssonM.SandstromR.Influence of welding speed on the fatigue of friction stir welds, and comparison with MIG and TIG. Int. J. Fatigue, 2003, 25, 1379–1387.
9.
JohnR.JataK. V.SadanandaK.Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys. Int. J. Fatigue, 2003, 25(9-11), 939–948.
10.
DengX.XuS.Solid mechanics simulation of friction stir welding process. Trans. NAMRI/SME, SME, 2001, 29, pp. 631–638.
11.
FratiniL.BuffaG.CDRX modelling in friction stir welding of aluminium alloys. Int. J. Mach. Tools Mf., 2005, 45(10), 1188–1194.
12.
TimoshenkoS.GoodierJ. N.Theory of elasticity (2nd edn). Engineering Society Monograph, 1951 (McGraw-Hill, New York).
13.
ShieldR. T.On the plastic flow of metals under conditions of axial symmetry. Proc. R. Soc. London, 1955, A233, 267–285.
14.
ScibettaM.LuconE.ChaouadiR.van WalleE.Instrumented hardness testing using a flat punch. Int. J. Pressure Vessels and Piping, 2003, 80, 345–349.
15.
ASM Speciality Handbook.Aluminum and aluminum alloys (Ed. DavisJ. R., Davis & Associates), (ASM International) 1993.
16.
PeelM.SteuwerA.PreussM.WithersP. J.Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater., 2003, 51(16), 4791–4801.
17.
BussuG.IrvingP. E.The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminum joints. Int. J. Fatigue, 2003, 25(1), 77–88.
18.
StaronP.KoçakM.WilliamsS.WescottA.Residual stress in friction stir-welded Al sheets. Physica B, 2004, 350(1-3), E491–E493 (supplement).
FratiniL.CirelloA.BuffaG.PastaS.AA6082-T6 friction stir welded joints fatigue resistance: Influence of process parameters. Proc. IMechE, Part B: J. Engineering Manufacture (submitted for publication).
21.
Yun-HeeL.KazukiT.YakichiH.DongilK.Prediction of stress directionality from pile-up morphology around remnant indentation. Scripta Mater., 2004, 51, 887–891.
22.
TaljatB.PharrG. M.Development of pile-up during spherical indentation of elastic-plastic solids. Int. J. Solids Structs, 2004, 41, 3891–3904.
23.
FratiniL.ZuccarelloB.Through-thickness residual stresses analysis of aluminum FSW butt joints. Int. J. Mach. Tools Mf. (accepted for publication).
