Electrolytic In-Process Dressing Superfinishing of Spherical Bearings Using Metal

Abstract

The use of electrolytic in-process dressing (ELID) superfinishing has been investigated with the aim of substantially improving surface finish on spherical bearing balls as well as reducing process times. Using ELID in a superfinishing configuration is substantially different from the more conventional precision grinding set-up. With this ELID superfinishing system, metal—resin bonded (MRB) wheels containing very small superabrasives (30 to 0.12 μm) were employed. Surface finishes of 2 nm R_a were achieved with a #12 000 wheel, an order of magnitude better than balls produced using the conventional production techniques of barrelling or polishing. Consistently sub-10 nm R_a finishes were achieved with a #2000 wheel. Different ways of using the ELID system, including ELID 1, ELID 2, and ELID 3, were studied to examine how the different types control the cutting condition at the wheel's surface. It is the ability to control easily the cutting condition of superabrasives of this size that allows mirror surface finishes to be efficiently produced. Monitoring of wheel spindle and ELID power usage was found to provide useful information in assessing the wheel condition.

Keywords

electrolytic in-process dressing (ELID)superfinishing spherical bearings metal—resin bonded wheels

References

Pavel

Marinescu

Investigation of pre-dressing time for ELID grinding technique. J. Mater. Processing Technol. 2004, 149, 591–596.

Ohmori

ELID grinding and micro-machining processes - tutorial notes (unpublished). In Proceedings of Lamdamap 7th International Conference, Cranfield University, 27–30 June 2005.

Rahman

Senthil Kumar

Lim

S. H.

Fatima

‘Nano finish grinding of brittle materials using electrolytic in-process dressing (ELID) technique’

Sadhana - Acad. Proc. Engng Sci. 2003, 28(5), 957–974.

Lim

H. S.

Fathima

Senthil Kumar

Rahman

A fundamental study on the mechanism of electrolytic in-process dressing (ELID) grinding. Int. J. Mach. Tools Mf 2002, 42(8) 935–943.

Zhu

Wang

Thangam

Simulation and analysis of rigid/foil electrolytic in-process dressing (ELID) systems for grinding. J. Mfg Sci. Engng 2004, 126(3) 565–570.

Bifano

Krishnamoorthy

Fawcett

Welch

Fixed-load electrolytic dressing with bronze bonded grinding wheels. J. Mfg Sci. Engng 1999, 121(1), 20–28.

Stephenson

D. J.

Sun

Zervos

A study on ELID ultra precision grinding of optical glass with acoustic emission. Int. J. Mach. Tools Mf 2006, 46, (10), 1053–1063.

Kasai

Karaki-Doy

Bandyopadhyay

B. P.

Itoh

Ohmori

Moriyasu

Finishing characteristics of brittle materials by ELID-lap grinding using metal-resin bonded wheels. Int. J. Mach. Tools Mf 1998, 38(7), 747–762.

Chiou

Y. C.

Lee

R. T.

Yau

C. L.

A novel method of composite electroplating on lap in lapping process. Int. J. Mach. Tools Mf 2007, 47(2), 361–367.

10.

Raffles

M. H.

ELID Superfinishing of spherical bearings PhD Thesis School of Applied Sciences, Cranfield University, UK, 2007.

11.

Jayakumar

Mukhopadhyay

C. K.

Venugopal

Mannan

S. L.

Raj

A review of the application of acoustic emission techniques for monitoring forming and grinding processes. J. Mater. Processing Technol. 2005, 159(1), 48–61.

12.

Ahn

J.-H.

Kim

H.-Y.

Seo

H.-Y.

Paik

I.-H.

In-process measurement of ELID grinding status - thickness of insulating layer. Korean Soc. Mech. Engrs Int. J. 2001, 15(9), 1268–1273.

13.

Deiva Nathan

Vijayaraghavan

Krishnamurthy

‘In-process monitoring of grinding burn in the cylindrical grinding of steel’

J. Mater. Processing Technol. 1999, 91(1-3), 37–42.

14.

Lee

E.-S.

A study on the mirror-like grinding of die steel with optimum in-process electrolytic dressing. J. Mater. Processing Technol. 2000, 100, 200–208.

15.

Bifano

T. G.

Fawcett

S. C.

‘Specific grinding energy as an in-process control variable for ductile-regime grinding’

Precision Engng 1991, 13(4) 256–262.

16.

Shih

A. J.

Clark

W. I.

Akemon

J. L.

‘Wear of the blade diamond tools in truing vitreous bond grinding wheels, Part II. Truing and grinding forces and wear mechanism’

Wear 2001, 250-251(1), 593–603.

17.

Shih

A. J.

An experimental investigation of rotary diamond truing and dressing of vitreous bond wheels for ceramic grinding. Int. J. Mach. Tools Mf 2000, 40(12), 1755–1774.

18.

Puthanangady

T. K.

Malkin

Experimental investigations of the superfinishing process. Wear 1995, 185(1-2), 173–182.

19.

Fathima

Senthil Kumar

Rahman

Lim

H. S.

A study on wear mechanism and wear reduction strategies in grinding wheels used for ELID grinding. Wear 2003, 254(12), 1247–1255.

20.

Arunachalam

Ramamoorthy

Texture analysis for grinding wheel wear assessment using machine vision. Proc. IMechE, Part B: J. Engineering Manufacture 2007, 221(3) 419–430 DOI: 10.1243/09544054JEM577.

Electrolytic In-Process Dressing Superfinishing of Spherical Bearings Using Metal—Resin Bond Ultra-Fine CBN Wheels

Abstract

Keywords

References