Finite element analysis and experimental validation of flashless cold forging of propeller hubs and blade of autonomous underwater vehicle

Abstract

In this paper three-dimensional finite element method analysis and experimental flashless cold forging of aluminium front and back hubs, and the blade of an autonomous underwater vehicle propeller are presented. The rigid—plastic finite element simulation is performed using Deform F-3V6.0, to estimate the optimum load required for the flashless cold forging. The complex profiles of the hubs and blade are modelled using Solidworks SP4.02007, which is also used for the modelling of the workpiece and die-punch assembly. The workpiece used is of AISI AL6061 and the die material is die steel (AISI D2). The process is optimized to form the propeller back and front hubs, and the blade. For all the models, three workpieces with different specifications are selected and investigated to obtain the optimum workpiece that gives flashless cold forging with no underfilling. Based on the simulation results, the flashless cold forging is successfully done on a 100 tonne C-type machine. The experimental forged samples conform well with the simulated models.

Keywords

cold forging underfilling workpiece flash underwater vehicle propeller hub blade

References

Badawy

A. A.

Raghupathi

P. S.

Kuhlmann

D. J.

Altan

, ‘Computer-aided design of multistage forging operations for round parts’ J. Mech. Working Technol. 11 (3) (1985): 259–274.

Natsume

Miyakawa

Muramatsu

T. J.

, ‘Fatigue abstract analysis on the fracture surface and cold forging die set using the X-ray fractography’ J. Soc. Mater. Sci. (Jap.) 38 (429) (1989): 612–616.

S. I.

W. T.

Tang

J. P.

, ‘Simulations of cold forging processes by the DEFORM system’ J. Mater. Process. Technol. 35 (3–4) (1992): 357–370.

Meidert

Knoerr

Westphal

Altan

, ‘Numerical and physical modelling of cold forging of bevel gears’ J. Mater. Process. Technol. 33 (1–2) (1992): 75–93.

Petersen

Frederiksen

P. S.

, ‘Fillet design in cold forging dies’ Computers and Structs 50 (3) (1994): 393–400.

Duggirala

Shivpuri

Kini

Ghosh

Roy

, ‘Computer aided approach for design and optimization of cold forging sequences for automotive parts’ J. Mater. Process. Technol. 46 (1–2) (1994): 185–198.

Kim

D. J.

Kim

B. M.

Choi

J. C.

, ‘Determination of the initial billet geometry for a forged product using neural networks’ J. Mater. Process. Technol. 72 (1) (1997): 86–93.

W. L.

Rao

K. P.

, ‘Analysis of the deformation characteristics of spike-forging process through FE simulations and experiments’ J. Mater. Process. Technol. 70 (1–3) (1997): 122–128.

Hsu

Q.-C.

Lee

R.-S.

, ‘Cold forging process design based on the induction of analytical knowledge’ J. Mater. Process. Technol. 69 (1–3) (1997): 264–272.

10.

Falk

Engel

Geiger

, ‘Estimation of tool life in bulk metal forming based on different failure concepts’ J. Mater. Process. Technol., 80–81 (1998): 602–607.

11.

C. S.

Suh

S. R.

Lee

M. C.

Kim

J. H.

Joun

M. S.

, ‘Computer aided process design in cold-former forging using a forging simulator and a commercial CAD software’ J. Mater. Process. Technol. 95 (1–3) (1999): 155–163.

12.

Lee

R.-S.

Hsu

Q.-C.

S.-L.

, ‘Development of a parametric computer-aided die design system for cold forging’ J. Mater. Process. Technol. 91 (1–3) (1999): 80–89.

13.

Z. M.

Brooks

J. W.

Dean

T. A.

, ‘Three-dimensional finite element modelling of forging of a titanium alloy aerofoil sectioned blade’ Trans. ASME, J. Mfg Sci. Engng, 121 (1999): 366–371.

14.

Qin

Balendra

Chodnikiewicz

, ‘A method for the simulation of temperature stabilisation in the tools during multi-cycle cold-forging operations’ J. Mater. Process. Technol. 107 (1–3) (2000): 252–259.

15.

Vazquez

Altan

, ‘New concepts in die design—physical and computer modelling applications’ J. Mater. Process. Technol. 98 (2) (2000): 212–223.

16.

Ishikawa

Yukawa

Yoshida

Kim

Tozawa

, ‘Prediction of dimensional difference of product from tool in cold backward extrusion’ CIRP Annls Mfg Technol. 49 (1) (2000): 169–172.

17.

Hussain

P. B.

Cheon

J. S.

Kwak

D. Y.

Kim

S. Y.

Y. T.

, ‘Simulation of clutch-hub forging process using CAMPform’ J. Mater. Process. Technol. 123 (1) (2002): 120–132.

18.

Lee

Y.-S.

Lee

J.-H.

Choi

J.-U.

Ishikawa

, ‘Experimental and analytical evaluation for elastic deformation behaviors of cold forging tool’ J. Mater. Process. Technol. 127 (1) (2002): 73–82.

19.

Kim

Y. S.

Son

H. S.

Kim

C. I.

, ‘Rigid—plastic finite element simulation for process design of impeller hub forming’ J. Mater. Process. Technol. 143–144 (20) (2003): 729–734.

20.

Ohashi

Imamura

Shimizu

Motomura

, ‘Computer-aided die design for axis-symmetric cold forging products by feature elimination’ J. Mater. Process. Technol. 137 (1–3) (2003): 138–144.

21.

Castro

C. F.

António

C. A. C.

Sousa

L. C.

, ‘Optimization of shape and process parameters in metal forging using genetic algorithms’ J. Mater. Process. Technol. 146 (3) (2004): 356–364.

22.

Song

J.-H.

Y.-T.

, ‘Process design for closed-die forging of bevel gear by finite element analyses’ J. Mater. Process. Technol., 192–193 (2007): 1–7.

23.

Sellier

Breitbach

Loch

Siedow

, ‘An iterative algorithm for optimal mould design in high-precision compression moulding’ Proc. IMechE, Part B: J. Engineering Manufacture 221 (B1) (2007): 25–33 DOI: 10.1243/09544054JEM606.

24.

Zhang

Chou

, ‘A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis’ Proc. IMechE, Part B: J. Engineering Manufacture 222 (B8) (2008): 959–996 DOI: 10.1243/09544054JEM990.

25.

Kim

D. J.

Kim

B. M.

, ‘Application of neural network and FEM for metal forming processes’ Int. J. Machine Tools Mfg, 40 (2000): 911–925.