Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining

Abstract

To observe excimer laser machining through thin liquid films and the effects thereof on debris control, equipment was designed to contain a small control volume that can be supplied with a laminar thin film of de-ionized (DI) water to flow over the workpiece. Using the same equipment, comparison with non-liquid ablation was possible. Reliable calculations of the debris size and density with respect to the distance from the centre of the shot, as well as the identification of modal trends in the dispersion of the debris were obtained from analysis of microscope images with graphical analysis software. The results suggest that the positional debris deposition of samples machined in ambient air show a modal tendency that is reliant on the machined feature shape and is a function of species size. This is proposed to be due to the interaction of multiple shockwaves at the extent of ablation plumes generated at geometry-specific locations in the feature. Debris is deposited where the shockwaves collide. Large debris did not typically travel much further than the boundary of the machined feature, whereas intermediate debris was found in radial streaks at a normal to the circular feature's perimeter. Laminar flows of liquid have shown potential to modify the end position and typical size of the debris produced, as well as increased homogeneity of deposition density. The use of immersion has reduced typical range by 17 per cent, and the deposition within the boundary of the ablation plume has a comparatively even population density with respect to the sample machined in ambient air. Outside the ablation plume extents, evidence of positional control of deposited debris species by laminar flow DI water immersion is shown by debris deposition in rippled flow line patterns for both circular and square features, indicating the action of transport by fluid flow. A typical increase in debris size by an order of magnitude when using DI water as an immersing liquid has been measured, a result that is in line with a colloidal interaction response.

Keywords

excimer ablation debris control liquid polymer

References

Yung

K. C.

Mei

S. M.

Yue

T. M.

, ‘Pulsed UV laser ablation of a liquid crystal polymer’ Int. J. Adv. Mfg Technol. 26 (11) (2005): 1231–1236.

X. F.

, ‘Phase explosion and its time lag in nanosecond laser ablation’ Appl. Surf. Sci. 197 (2002): 61–66.

X. F.

Song

K. H.

, ‘Phase change phenomena during high power laser-materials interaction’ Mater. Sci. Engng A-Struct. Mater. Props Microstruct. Process. 292 (2) (2000): 162–168.

X. F.

Song

K. H.

, ‘Interface kinetics during pulsed laser ablation’ Appl. Phys. A-Mater. Sci. Process. 69 (Suplement 1) (1999): S869–S873.

Prasad

Conforti

P. F.

Garrison

B. J.

, ‘Coupled molecular dynamics-Monte Carlo model to study the role of chemical processes during laser ablation of polymeric materials’ J. Chem. Phys. 127 (8) (2007): 337–349.

Cooper

J. B.

Julian

Morrison

Song

Albin

Zehn

J. L.

, ‘Surface characterization of pulsed UV-laser modified polyamide films’ Thin Solid Films 303 (1–2) (1997): 180–190.

Révész

Borr

, ‘Excimer laser induced surface chemical modification of polytetrafluoroethylene’ Appl. Surf. Sci. 109 (1996): 222–226.

Lee

S. K.

Chang

W. S.

S. J.

, ‘Numerical and experimental study on the thermal damage of thin Cr films induced by excimer laser irradiation’ J. Appl. Phys. 86 (8) (1999): 4282–4289.

Pataulf

Dyer

, ‘Photomechanical processes and effects in ablation’ Cheml. Rev. 103 (2) (2003): 487–518.

10.

Georgiou

Koubenakis

, ‘Laser-induced material ejection from model molecular solids and liquids: Mechanisms, implications and applications’ Cheml. Rev. 103 (2) (2003): 349–394.

11.

Kelly

Miotello

, ‘On the role of thermal processes in sputtering and composition changes due to ions or laser pulses’ Nucl. Instrum. Methods Phys. Res. S B: Beam Interact. Mater. Ats. 141 (1–4) (1998): 49–60.

12.

Bowling

R. A.

Mittal

I. K. L.

, ‘A theoretical review of particle adhesion’ Particles on surfaces: Detection, adhesion, and removal (New York: CRC Press 1988): pp. 129–142.

13.

Dyer

P. E.

Farrar

Key

P. H.

, ‘Investigation of excimer ablation of ceramic and thin film Y-Ba-Cu-O using nanosecond photoacoustic techniques’ Appl. Phys. Lett. 60 (15) (1992): 1890–1892.

14.

Lippert

David

Dickinson

J. T.

Hauer

Kogelschatz

Langford

S. C.

Nuyken

Phis

Robert

Wokaun

, ‘Structure-property relations of photoreactive polymers designed for laser ablation’ J. Photochem. Photobiol. A 145 (3) (2001): 145–157.

15.

Dyer

P. E.

Karnakis

D. M.

Key

P. H.

Tait

J. P.

, ‘Excimer laser ablation of low and high absorption index polymers’ Appl. Surf. Sci. 96–98 (2) (1996): 167–173.

16.

Dyer

P. E.

Karnakis

D. M.

Key

P. H.

Sands

, ‘Fast photography of UV laser ablated metal films’ Appl. Surf. Sci. 109–110 (1997): 168–173.

17.

Clarke

Dyer

P. E.

Key

P. H.

Snelling

H. V.

, ‘Plasma ignition thresholds in UV laser ablation plumes’ Appl. Phys. A 69 (7) (1999): S117–S120.

18.

Kruusing

, ‘Underwater and water-assisted laser processing: Part 2 - etching, cutting and rarely used methods’ Opt. Lasers Engng. 41 (2) (2004): 329–352.

19.

Yukawa

, ‘Quantum theory of non-local fields. Part 1. Free fields’ Physi. Rev. 77 (1950): 219–226.

20.

Kim

J. Y.

Sohn

Kim

E. R.

, ‘Polymer-based multi-layer conductive electrode film for plastic LCD applications’ Appl. Phys. A 72 (6) (2001): 699–704.

21.

Bardina

, ‘Methods for surface particle removal: A comparative study’ Particulate Sci. Technol. 6 (2) (1988): 121–131.

22.

Zapka

Asch

Keyser

Meissner

, Removal of particles from solid-state surfaces. European patent EP 0 297 506 A2, 04/01/1989.

23.

Rizvi

N. H.

Rhumsby

P. T.

Gower

M. C.

, ‘New developments and applications in the production of 3D microstructures by laser micromachining’ Proc. SPIE, 3898 240 (1999): Pp. 240–249.

24.

Ashfold

M. N. R.

Claeyssens

Fuge

J. M.

Henley

S. J.

, ‘Pulsed laser ablation and deposition of thin films’ Chem. Soci. Rev. 33 (2004): 23–31.

25.

Krupp

, ‘Particle adhesion theory and experiment’ Adv. Colloid Interface Sci. 1 (2) (1967): 111–239.

26.

Visser

, ‘Measurement of the force of adhesion between submicron carbon-black particles and a cellulose film in aqueous solution’ J. Colloid Interface. Sci. 34 (1) (1970): 6–31.

27.

Bhattacharya

Mittal

K. L.

, ‘Mechanics of removing glass particles from a solid surface’ Surf. Technol. 7 (1978): 413–425.

28.

Biggs

Cain

R. G.

Dagastine

R. R.

Page

N. W.

, ‘Direct measurements of the adhesion between a glass particle and a glass surface in a humid atmosphere’ J. Adhes. Sci. Technol. 16 (2002): 869–885.

29.

Leite

F. L.

Herrmann

P. S. P.

, ‘Mapping of adhesion forces on soil minerals in air and water by atomic force spectroscopy (AFS)’ J. Adhes. Sci. Technol. 17 (16) (2003): 2141–2156.

30.

Vezenov

D. V.

Noy

Ashby

, ‘Chemical force microscopy’ Ann. Rev. Mater. Sci. 27 (1) (1997): 381–421.

31.

Yang

G. W.

, ‘Laser ablation in liquids: Applications in the synthesis of nanocrystals’ Prog. Mater. Sci. 52 (4) (2006): 648–698.

32.

Fabbro

Peyre

Berthe

Scherpereel

X. L.

, ‘Physics and applications of laser-shock processing’ J. Laser Appl. 10 (6) (1998): 265–279.

33.

Sattari

Sajti

C. L.

Kahn

Barcikowski

, ‘Scale-up of nanoparticle production during laser ablation of ceramics in liquid media’. In Proceedings of the 27th International Congress on Application of lasers and electro-optics: Laser materials processing section, Temecula, California, 2008, pp. 49–54 (Laser Institute of America, Orlando, Florida).

34.

Zhu

Y. F.

Hong

M. H.

Chen

X. Y.

, ‘Laser ablation of solid substrates in water and ambient air’ J. Appl. Phys. 89 (4) (2001): 2400–2403.

35.

Dowding

C. F.

Lawrence

, ‘Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion’. In Proceedings of the 27th International Congress on Application of lasers and electro-optics: Laser materials processing section, Temecula, California, 2008, pp. 202–211 (Laser Institute of America, Orlando, Florida).

36.

Katto

Kuroe

Kaku

Kubodera

Yokotani

Katayama

Nakayama

, ‘Nano-particles of hydroxyapatite formed by underwater laser ablation method’. In Proceedings of The 27th International Congress on Application of lasers and electro-optics: Laser materials processing section, Temecula, California, 2008, pp. 65–67 (Laser Institute of America, Orlando, Florida).

37.

Dyer

P. E.

Key

P. H.

Sands

Snelling

H. V.

Wagner

F. X.

, ‘Blast-wave studies of excimer laser ablation of ZnS’ Appl. Surf. Sci. 86 (1) (1995): 18–23.

38.

Kawamoto

, ‘The history of the liquid-crystal displays’ Proc. IEEE 90 (4) (2002): 460–500.

39.

Berthe

Fabbro

Peyre

Bartnicki

, ‘Wavelength dependence of laser shock-wave generation in the water-confinement regime’ J. Appl. Phys. 85 (11) (1999): 7552–7555.

40.

Peyer

Berthe

Fabbro

Sollier

, ‘Experimental determination by PVDF and EMV techniques of shock amplitudes induced by 0.6-3 ns laser pulses in a confined regime with water’ J. Phys. D. Appl. Phys. 33 (5) (2000): 498–503.

41.

Heim

L. O.

Ecke

Preuss

Butt

H. J.

, ‘Adhesion forces between individual gold and polystyrene particles’ J. Adhes. Sci. Technol. 16 (7) (2002): 829–843.