In this paper the development of an effective hybrid electrodischarge and electrochemical profiling/dressing system is depicted. To realize the profiling of superhard grinding wheels, an innovative segmental tool electrode has been designed and tested. The principle of operating this system, the case for its realization, mathematical modelling, and experimental results concerning dressing of grinding wheels is discussed. The results of the investigation demonstrate the usefulness of a hybrid system for the profiling of superhard grinding wheels and the shaping macro- and micro-geometry of the cutting surface grinding wheel (CSGW).
InasakiI.TonschoffK.HowersT. D.Abrasive machining in the future. Ann. CIRP, 1993, 42(2), 723–731.
2.
BaileyM. W.JuchemH. O.The advantages of CBN grinding: Low cutting forces and improved workpiece integrity. Ind. Diamond Rev., 1998, 58, 383–389.
3.
KuriyagawaT.Advances technology in Japan. In Advances in abrasive technology, The Society of Grinding Engineering, Japan, 1999 pp. 2–6.
4.
ArdieltT.BraunO.WarneckeG.Development of a superabrasive grinding wheel with defined grain structure using kinematic simulations. Ann. CIRP, 2003, 52(1), 275–280.
5.
WebsterJ.TricardM.Innovations in abrasive products for precision grinding. Ann. CIRP, 2004, 53(2), 1–21.
6.
GołąabczakA.Forming methods of operational properties of grinding wheels (in Polish) 2004, Technical University of Lodz, monograph.
TamakiJ.KondohK.IyamaT.Electrocontact discharge truing dressing of metal bonded diamond grinding wheel utilizing a hybrid electrode. Advances in abrasive technology, The Society of Grinding Engineering, Japan, 1999, pp. 411–448.
9.
SchopfM.Dressing of metal bond grinding wheels by ECDM. Ind. Diamond Rev., 2002, 64(2), 82–85.
10.
GołąbczakA.KaczmarekJ.Electrodischarge dressing of superhard grinding wheels with segmental electrode. In Proceedings of the 13th International Conference 'DAAAM', Austria, 2002, pp. 92–93.
11.
LuiX.KozakJ.ThuZ.TarganS.Study of novel electrodes for high speed grinding. In Proceedings of the 13th International Symposium for Electromachining, 2001, Bilbao, Spain, pp. 295–312.
12.
StephensonD.HedgeJ.CorbettJ.Surface finishing of Ni-Cr-B-Si composite coating by precision grinding. Int. J. Mach. Tools and Mfg, 2002, 42, 357–363.
13.
GołąbczakA.KozakJ.KoziarskiA.Investigations of the process of electrochemical dressing of grinding wheels using alternating current. Trans. NAMRC/SME, USA, 1997, XXV, 111–116.
14.
GołąbczakA.KozakJ.YamaguchiJ.Study of electrochemical dressing of superhard grinding wheels using alternating current (ECD-AC). Advances in abrasive technology. The Society of Grinding Engineering, Japan, 1999, pp. 49–55.
15.
GołąbczakA.Some problems of electrochemical and electrodischarge dressing of grinding wheels. In Proceedings of the 13th International Symposium for Electromachining, 2001, Bilbao, Spain, pp. 851–868.
16.
GołąbczakA.KozakJ.Hybrid electrodischarge and electrochemical system for dressing of metal bond grinding wheel. In Proceedings of the III International Conference on Advances in Production Engineering, Warsaw, 2004, part 3, pp. 261–270.
17.
KozakJ.Effect of the wear of rotating tool accuracy of machined parts. In Proceedings of the II International Conference on Advances in production engineering, Warsaw, 2001, pp. 253–262.
