A study was conducted to assess the robustness of a plane strain finite element model that was developed to simulate plate shearing using the Cockroft-Latham fracture criterion and element deletion. Model predictions for blade gap, ductility and edge wear were compared with published experimental results. Results showed that the model was able to simulate initiation and propagation of fracture lines at the punch and die corners and the resultant break angle along the edge was found to be close to values observed in practice. Simulated edge geometry and microhardness were found to be in reasonable agreement with published experimental results for the steel plate considered although the model was unable to simulate double cutting at 0.8 per cent clearance. Results also suggest that edge hardness is independent of the starting ductility in the plate and that increasing the edge radii does not effectively simulate edge wear. Based on the results obtained, it may be concluded that the plane strain model is able to simulate plate shearing with sufficient accuracy in the range of normal process conditions.
TaupinE.BreitlingJ.AltanT.WuW. T.Material fracture and burr formation in blanking, results of FEM simulations and comparison with experiments. J. Mater. Processing Technol., 1996, 59, 68–78.
2.
KoD.-C.KimB.-M.ChoiJ.-C.Finite-element simulation of the shear process using the element-kill method. J. Mater. Processing Technol., December 1997, 72(1), 129–140.
3.
KomoriK.Simulation of shearing by node separation method. Computers and Structs, 2001, 79, 197–207.
4.
LeeT.ChanL.ZhengP.Application of the finite-element deformation method in the fine blanking process. J. Mater. Processing Technol., January 1997, 63(1–3), 744–749.
5.
AbdaliA.BenkridK.BussyP.Numerical simulation of sheet cutting. In Simulation of Materials Processing: Theory, Methods and Application, 1995, pp. 807–813 (Balkema, Rotterdam).
6.
WisselinkH.HuetinkJ.Simulation of stationary sheet metal cutting processes. In Simulation of Materials Processing: Theory, Methods and Applications, 1998, pp. 985–990 (Balkema, Rotterdam).
7.
PopatP.GhoshA.KishoreN.Finite-element analysis of the blanking process. J. Mech. Working Technol., March 1989, 18, 269–282.
8.
PopatP.GhoshA.KishoreN.Theoretical investigation of optimum clearance in blanking. J. Mech. Working Technol., July 1989, 19, 251–259.
9.
ChenZ. H.TangC. Y.LeeT. C.ChanL. C.A study of strain localization in the fine-blanking process using the large deformation finite element method. J. Mater. Processing Technol., February 1999, 86, 163–167.
10.
BreitlingJ.ChernauskasV.TaupinE.AltanT.Precision shearing of billetsâspecial equipment and process simulation. J. Mater. Processing Technol., November 1997, 71(1), 119–125.
11.
DombleskyJ.ZhaoL.Fracture criteria evaluation and finite element modelling of plate shearing, Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 2002, 216(B1), 25–38.
12.
ZhuY.CescottoS.HabrakenA.A fully coupled elastoplastic damage modeling and fracture criteria in metalforming processes. J. Mater. Processing Technol., 1992, 32, 197–204.
13.
BenallalA.BillardonR.LemaitreJ.Continuum damage mechanics and local approach to fracture: Numerical procedures. Computer Meth. Appl. Mechanics Engng, November 1991, 92(2), 141–155.
14.
GursonA.Continuum theory of ductile rupture by void nucleation and growth. Trans. ASME, J. Engng Mater. Technol., 1977, 99(1), 2–15.
15.
ScheyJ.Introduction to Manufacturing Processes, 3rd edition, 2000, p. 354 (McGraw-Hill, New York).
16.
KobyashiS.OhS. I.AltanT.Metal Forming and the Finite Element Method, 1989, pp. 90–131 (Oxford University Press, Oxford).
WuW. T.OhS. I.ALPIDT: A general purpose FEM code for simulation of non-isothermal forming processes. In Transactions of the 13th North American Manufacturing Research Conference, 1985, pp. 449–455 (Society of Manufacturing Engineers, Dearborn, Michigan).
19.
OhS.WuW.TangJ.VedhanayagamA.Capabilities and applications of the FEM code DEFORM: The perspective of the developer. J. Mater. Processing Technol., 1991, 27, 25–42.
20.
WuW. T.LiG.ArvindA.TangJ.Development of a three dimensional finite element method based process simulation tool for the metal forming industry. In Proceedings of the 1996 European Joint Conference on Engineering Systems Design and Analysis, Vol. 3, 1996, PD-Vol. 75, pp. 143–150 (American Society of Mechanical Engineers, New York).
21.
AltanT.OhS.GegelH.Metal Forming: Fundamentals and Applications, 1983, p. 85 (American Society for Metals, Metals Park, Ohio).
22.
RabinowiczA.Friction and Wear of Materials, 2nd edition, 1995, pp. 118–119 (John Wiley, New York).
23.
WeaverH. P.A study of sheared edge properties. MS thesis, Michigan Technological University, Houghton, Michigan, 1980.
24.
KimH.Computer aided product and sequence design for cold forming. PhD dissertation, The Ohio State University, Columbus, Ohio, 1994, pp. 145–148.
25.
TaborD.The hardness and strength of materials. J. Inst. Metals, 1950, 79, 1–18.
26.
WeaverH. P.WeinmannK. J.A study of edge characteristics of sheared and bent steel plate. J. Appl. Metalworking, January 1985, 3(4), 381–390.
