Sage Journals: Discover world-class research

Abstract

Engineering a system for its whole life cycle involves the phase of designing the system, when all requirements for function, capabilities, life cycle and societal (economic, ergonomic, aesthetic, law conformance, etc.) properties should be established, and as far as possible fulfilled. Designing need not be just an intuitive and idiosyncratic procedure—it can be made more rational.

Design Science has set itself the goal of providing a comprehensive theory. Theories cannot be directly applied. Methods and models derived from the theory can be applied if the relevant parts of the theory are understood (at least at an awareness level) by the applying designer, and the actions and documentation are demanded by design management. The resulting improvement in the process will also render the design process more transparent, and open to review and audit, as demanded by the ISO 9000 series of quality standards. Some contacts with the disciplines of systems engineering and life cycle engineering are indicated. Most formal models of design processes are formulated for novel design problems. They can help to clarify the problem in a more formalized way. Design Science can effectively be applied to novel or redesign problems.

Keywords

designing design process systematic designing

References

Graedel

T. E.

Streamlined Life-Cycle Assessment, 1998 (Prentice-Hall, Upper Saddle River, New Jersey).

Bush

S. A.

Sheldon

D. F.

Whose cost is it anyway? In WDK 22: Proceedings of ICED 93, The Hague, 1993, pp. 1130–1135 (Heurista, Zürich).

Bush

S. A.

Sheldon

D. F.

Whole life costing: A businesslike approach to product design. In WDK 23: Proceedings of ICED 95, Prague, 1995 (Ed. Hubka

), pp. 988–994 (Heurista, Zürich).

Hubka

Eder

W. E.

Design Science: Introduction to the Needs, Scope and Organization of Engineering Design Knowledge, 1996 (Springer-Verlag, London).

Hubka

Eder

W. E.

Theory of Technical Systems, 1988 (Springer-Verlag, Berlin-Heidelberg-New York).

Hubka

Theorie der Konstruktionsprozesse (Theory of Design Processes), 1976 (Springer-Verlag, Berlin).

Hubka

Eder

W. E.

Engineering Design, 1992 (Heurista, Zürich).

Hubka

Andreasen

M. M.

Eder

W. E.

Practical Studies in Systematic Design, 1988 (Butterworths, London).

Eder

W. E.

(Ed.) WDK 24-EDC-Engineering Design and Creativity-Proceedings of Workshop EDC, 1996 (Heurista, Zürich).

10.

Klaus

Kybernetik in Philosophischer Sicht (Cybernetics in Philosophical View), 4th edition, 1965 (Dietz Verlag, Berlin).

11.

Ashby

W. R.

An Introduction to Cybernetics, 1968 (Methuen University Paperbacks, London).

12.

Züst

Matt

Geisinger

Winkler

A change of paradigm for planning life-cycle optimized and innovative products. In WDK 26: Proceedings of ICED 99, Munich, 1999, pp. 1081–1084 (Heurista, Zürich).

13.

Züst

Systems engineering-a methodology for life cycle engineering in interdisciplinary teams. In WDK 25: Proceedings of ICED 97, Tampere, 1997, pp. 329–336 (Heurista, Zürich).

14.

Pahl

Beitz

Konstruktionslehre, 3rd edition, 1993 (Springer-Verlag, Berlin/Heidelberg); Engineering Design (Eds Wallace

K.M.

Blessing

Bauert

), 2nd edition, 1955 (Springer-Verlag, London).

15.

Jones

J. Ch.

Design Methods-Seeds of Human Futures, 2nd edition, 1980 (John Wiley, New York).

16.

Cross

Engineering Design Methods: Strategies for Product Design, 2nd edition, 1994 (John Wiley, London).

17.

Birmingham

Cleland

Driver

Maffin

Understanding Engineering Design, 1997 (Prentice-Hall, London).

18.

Suh

N. P.

Principles of Design, 1989 (University Press, Oxford).

19.

Schön

D. A.

The Reflective Practitioner: How Professionals Think in Action, 1983 (Basic Books, New York).

20.

Feilden

G. B. R.

Engineering Design, Report of Royal Commission, 1963 (HMSO, London).

21.

Eder

W. E.

Methode QFD-Bindeglied zwischen Produkt-planung und Konstruktion (Method QFD-Connective link between product planning and design). In Konstruktion, February 1995, Vol. 47, Nos 1/2, pp. 1–9 (Springer-Verlag, Berlin).

22.

Cross

Engineering Design Methods: Strategies for Product Design, 2nd edition, 1994 (John Wiley, Chichester).

23.

Bossert

J. L.

Quality Function Deployment, 1990 (Marcel Dekker, New York).

24.

Hauser

J. R.

Clausing

The house of quality. Harv. Business Rev., May-June 1988, 63–73.

25.

Sullivan

L. P.

Quality function deployment. Quality Prog., June 1986, 39–51.

26.

Hofmeister

K. R.

Quality function deployment: Market success through customer-driven products. In Food Product Development From Concept to the Marketplace (Eds Graf

Saguy

I.S.

), 1990, pp. 189–210 (ASI Press, Dearborn, Michigan).

27.

Müller

Akzeptanzbarrieren als berechtigte und ernst zu nehmende Notwehr kreativer Konstrukteure-nicht immer nur böser Wille, Denkträgheit oder alter Zopf (Acceptance barriers as justified and serious defence reaction of creative designers-not always ill will, thinking inertia or old hat). In WDK 20: Proceedings of ICED 91, Zürich (Ed. Hubka

), 1991, pp. 769–776 (Heurista, Zürich); also Acceptance barriers as justified and serious defence reaction of creative designers-not always only ill will, thinking inertia or old hat. In WDK 24-EDC-Engineering Design and Creativity-Proceedings of Workshop EDC (Ed. W. E. Eder), 1996, pp. 79–84 (Heurista, Zürich).

28.

Müller

Akzeptanzprobleme in der Industrie, ihre Ursachen und Wege zu ihrerüberwindung (Acceptability problems in industry, their causes and ways to overcome them). In Psychologische und Pädagogische Fragen beim Methodischen Konstruieren-Ladenburger Diskurs (Ed. Pahl

), 1994, pp. 247–266 (Verlag TV Rheinland, Cologne).

29.

Eder

W. E.

Acceptance barriers-why are design methods not accepted. In Proceedings of ASEE Annual Conference, Design in Engineering Education Division (Session 2225), Charlotte, North Carolina, June 1999 (ASEE, Washington, DC).

30.

Koen

B. V.

Definition of the Engineering Method, 1985 (ASEE, Washington, DC).

Designing and life cycle engineering—a systematic approach to designing

Abstract

Abstract

Keywords

References