Parameter optimization by Taguchi methods for finishing advanced ceramic balls using a novel eccentric lapping machine

Abstract

The final finishing process of advanced ceramic balls used in hybrid precision bearings constitutes two-thirds of the total manufacturing cost, and hence effective and economic finishing methods and processes are critical to their widespread application. A novel eccentric lapping machine is designed and manufactured. Hot isostatically pressed silicon nitride ball blanks (diameter 13.25mm) are used to investigate the feasibility of accelerating the ball finishing process while maintaining high surface quality. Taguchi methods are used during the first step of finishing to optimize lapping parameters; the L9 (3⁴) four-parameter, three-level orthogonal array is used to design the experiment. Experimental results reveal that this novel eccentric lapping method is very promising; a material removal rate of 40 μm/h is achievable. The optimum lapping condition is found to be high speed, high load and high paste concentration with 60 μm diamond particles. The analysis of variance shows that the most significant lapping parameter is lapping load, which accounts for 50 per cent of the total, followed by lapping speed (31 per cent); the particle size and paste concentration only account for 12 per cent and 7 per cent respectively. A comparison with previous lapping experiments and the mechanism of material removal are also discussed briefly.

Keywords

lapping polishing finishing eccentric lapping ceramic ball finishing Taguchi methods silicon nitride hybrid bearings

References

Cundill

R. T.

Light-weight material for the rolling elements of aircraft bearings. Ball Bearing J., 1983, 216, 33–36.

Kang

Hadfield

A study on the lapping of ceramic ball. In Surpace Treatment IV—Computer Methods and Experimental Measurements, Assisi, Italy, 1999, pp. 389–398 (Computational Mechanics Publications, Southampton).

Cochran

W. G.

Cox

G. M.

Experimental Designs, 2nd edition, 1968 (John Wiley, New York).

Buckingham

Model experiments and the form of empirical equations. Trans. ASME, 1915, 37.

Taguchi

Taguchi Methods—Research and Development, 1992 (ASI Press, Dearborn, Michigan).

Taguchi

Taguchi on Robust Technology Development, Bringing Quality Engineering Upstream, 1992 (American Society for Mechanical Engineers, New York).

Taguchi Methods. Case Studies from the US and Europe, 1989 (ASI Press, Dearborn, Michigan).

Bendell

(Ed.) Taguchi Methods, 1st European Conference Papers, 1989 (Elsevier, Amsterdam).

Fowlkes

W. Y.

Creveling

C. M.

Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development, 1995 (Addison-Wesley, Reading, Massachusetts).

10.

Kang

Hadfield

The loose abrasive process in the eccentric lapping and polishing of advanced ceramic balls (in preparation).