In this paper the known solutions for contact problems in which partial slip arises are reviewed and how these may, in some cases, be readily extended is indicated. The objective is to provide a comprehensive collection of the types of solution which will be of primary interest to those designing against both fretting itself (and consequences such as wear) and fretting fatigue.
CattaneoC.Sul contatto di due corpi elastici: Distribuzion locale degli sforzi. Reconditi Accad. Naz. Lincei, 1938, 27, 342–348, 434–436, 474–478.
2.
MindlinR. D.Compliance of elastic bodies in contact. J. Appl. Mechanics, 1949, 16, 259–268.
3.
SpenceD. A.Self-similar solutions to adhesive contact problems with incremental loading. Proc. R. Soc. Lond. A, 1968, 305, 55–80.
4.
PerssonA.On the stress distribution of cylindrical bodies. I: Elastic contact. PhD dissertation, Chalmers Tekniska Hogskola, Goteborg, 1964.
5.
LinS.HillsD. A.NowellD.Stresses in a flat plate due to a loose pin pressing against a cracked hole. J. Strain Analysis, 1997, 32 (2), 145–156.
6.
Urriolagoitia SosaG.HillsD. A.SackfieldA.A shrink-fit peg subjected to bending and shearing forces. J. Strain Analysis, 1999, 34 (1), 23–29.
7.
ComninouM.DundursJ.Partial closure of cracks at the interface between a layer and a half-space. Engng Fracture Mechanics, 1983, 18 (2), 315–323.
8.
MunisamyR. L.HillsD. A.NowellD.Static axisymmetric Hertzian contacts subject to shearing forces, J. Appl. Mechanics, 1994, 61 (2), 278–283.
9.
MindlinR. D.DeresciewiczH.Elastic spheres in contact under varying oblique forces. J. Appl. Mechanics, 1953, 75, 327–344.
10.
TrumanC. E.SackfieldA.HillsD. A.Contact mechanics of wedge and cone indenters. Int. J. Mech. Sci., 1995, 37 (3), 261–275.
11.
CattaneoC.Teoria del contatto elastico in seconda approssi-mazione: Compressione obliqua. Re. Sem. Fac. Sci. Univ. Cagliari, 1947, 17, 13–28.
12.
FaanesS.Mechanics of fretting fatigue. Dr Ing. thesis, Department of Applied Mechanics, Thermo- and Fluid Dynamics, Norwegian Institute of Technology, 1994.
CiavarellaM.HillsD. A.MonnoG.Influence of rounded edges on indentation by a flat punch. Proc. Instn Mech. Engrs, Part C, Journal of Mechanical Engineering Science, 1998, 212 (C4), 319–328.
16.
CiavarellaM.HillsD. A.MonnoG.Contact problems for a wedge with rounded apex. Int. J. Mech. Sci., 1998, 40 (10), 977–988.
17.
CiavarellaM.DemelioG.On non-symmetrical plane contacts. Int. J. Mech. Sci., 1999 (submitted).
18.
CiavarellaM.Tangential loading of 3-D contacts. J. Appl. Mech., 1999 (in press).
19.
CiavarellaM.Indentation by nominally flat or conical indenters with rounded corners. Int. J. Solids Structs, 1999 (in press).
20.
NowellD.HillsD. A.Mechanics of fretting fatigue tests. Int. J. Mech. Sci., 1987, 29 (5), 355–365.
21.
NowellD.DaiD. N.Analysis of surface tractions in complex fretting fatigue cycles using quadratic programming. Trans. ASME, J. Tribology, 1998, 20 (4), 744–749.
22.
KimH.-K.HillsD. A.NowellD.Partial slip between contacting cylinders under transverse and axial shear. Int. J. Mech. Sci., 1999 (in press).
23.
LubkinJ. L.The torsion of elastic spheres in contact. J. Appl. Mechanics, 1951, 18, 183–187.
24.
DeresiewiczH.Contact of elastic spheres under an oscillating torsional couple. J. Appl. Mechanics, 1954, 21, 52–56.
25.
HillsD. A.SackfieldA.The stress field induced by a twisting sphere. J. Appl. Mechanics, 1986, 53 (2), 372–378.
26.
SpenceD. A.An eigenvalue problem for elastic contact with finite friction. Proc. Camb. Phil. Soc., 1973, 73, 249–268.
27.
SpenceD. A.The Hertz contact problem with finite friction. J. Elasticity, 1975, 5 (3–4), 297–319.
28.
TurnerJ. R.The frictional unloading problem on a linear elastic half-space. J. Inst. Math. Applic., 1979, 24, 439–469.
29.
SpenceD. A.Frictional contact with transverse shear. Q. J. Mechanics Appl. Math., 1986, 39 (2), 233–253.
30.
HillsD. A.SackfieldA.The stress field induced by normal contact between dissimilar spheres. J. Appl. Mechanics, 1987, 54 (1), 8–14.
31.
NowellD.HillsD. A.SackfieldA.Contact of dissimilar elastic cylinders under normal and tangential loading. J. Mechanics Physics Solids, 1988, 36 (1), 59–75.
32.
MunisamyR. L.HillsD. A.NowellD.Static axisymmetric contacts subject to shearing forces. J. Appl. Mechanics, 1994, 61 (2), 278–283.
33.
KellyP. A.HillsD. A.NowellD.Curved interface cracks between elastically dissimilar media with application to the analysis of circular inclusions. Int. J. Mech. Sci., 1994, 36 (3), 173–181.
34.
GoodmanL. E.KeerL. M.The contact stress problem for an elastic sphere indenting an elastic cavity. Int. J. Solids Structs, 1965, 1, 407–415.
35.
BenthallR.JohnsonK. L.An elastic strip in plane rolling contact. Int. J. Mech. Sci., 1968, 10, 637–663.
36.
HillsD. A.NowellD.SackfieldA.Mechanics of Elastic Contacts, 1993, pp. 349–391 (Butterworth-Heinemann, Oxford).
DaiD. N.NowellD.HillsD. A.Partial closure and frictional slip of 3-D cracks. Int. J. Fracture, 1993, 63, 89–99.
39.
SchmueserD.ComninouM.DundursJ.Separation and slip between a layer and a substrate caused by a tensile load. Int. J. Engng Sci., 1980, 18, 1149–1155.
40.
SchmueserD.ComninouM.DundursJ.Frictional slip betwen a layer and a substrate. ASCE, J. Engng Mech. Div., 1981, 107, 1103–1119.
41.
DundursJ.ComninouM.Frictional slip in elasticity: An example. ASCE, J. Engng Mech. Div., 1982, 108, 344–353.
42.
ComninouM.DundursJ.An educational elasticity problem with friction. Part 2: Unloading and re-loading for strong friction and re-loading. J. Appl. Mechanics, 1982, 49, 47–51.
43.
AnscombeH.JohnsonK. L.Slip of a thin solid tyre press-fitted on a wheel. Int. J. Mech. Sci., 1974, 16, 329–334.
44.
ComninouM.BarberJ. R.DundursJ.Interface slip caused by a surface load moving at a steady speed. Int. J. Mech. Sci., 1983, 25 (1), 41–46.
45.
HillsD. A.NowellD.Mechanics of Fretting Fatigue, 1994, pp. 201–205 (Kluwer Academic, Dordrecht).
46.
RuizC.ChenK. C.Life assessment of dovetail joints between blades and disks in aero engines. In Proceedings of the International Conference onFatigue, Sheffield, 1986 (Mechanical Engineering Publications Limited, London).
47.
NowellD.HillsD. A.O'ConnorJ. J.An analysis of fretting fatigue. In Proceedings of the International Conference onTribology, 1987 (Mechanical Engineering Publications Limited, London).
