A novel instrument is described for the simultaneous observation and capture of four phase-stepped photoelastic images. A theoretical description of the optics of the instrument is presented for the first time. Three examples are given of the use of the instrument in reflection photoelasticity to generate full-field maps of isochromatic and isoclinic parameters. The results from these experiments show close correlation to results from both theoretical analyses and manual measurements. The instrument can be used in either reflection or transmission mode and it is concluded that the new instrument significantly enhances the potential for real-time studies using reflection photoelasticity.
HeckerF. W.MorcheB.Computer measurement of relative retardations in plane photoelasticity. In Experimental Stress Analysis (Ed. WeiringaH.), 1986, pp. 532–542 (Martinuus Nijhoff Publishers, Dordrecht, The Netherlands).
2.
KiharaT.Automatic whole-field measurement of photoelasticity using linear polarized incident light. In Proceedings of Ninth International Conference onExperimental Mechanics, Copenhagen, Denmark, 1990, Vol. 2, pp. 821–827.
3.
PattersonE. A.WangZ. F.Towards full-field automated photoelastic analysis of complex components. Strain, 1991, 27 (2), pp. 49–56.
4.
SarmaA. V.S.S.R.PillaiS. A.SubramanianG.VaradanT. K.Computerised image processing for whole-field determination of isoclinics and isochromatics. Expl Mechanics, 1992, 31 (1), pp. 24–29.
5.
AsundiA.Phase-shifting in photoelasticity. Expl Techniques, 1993, 17 (1), pp. 19–23.
6.
OtaniY.ShimadaT.YoshizawaT.UmedaN.Two-dimensional birefringence measurement using the phase shifting technique. Opt. Engng, 1994, 33 (5), pp. 1604–1609.
7.
FesslerH.An assessment of frozen stress photoelasticity. J. Strain Analysis, 1992, 27 (3), pp. 123–126.
8.
PattersonE.A.Automated photoelastic analysis. Strain, 1988, pp. 15–20.
9.
MullerR.K.SaackelL.R.Complete automatic analysis of photoelastic fringes. Expl Mechanics, 1979, 19, pp. 245–251.
10.
UmezakiB.TamakiT.TakahashiS.Automatic stress analysis from photoelastic fringes due to image processing using a personal computer. Proc. Soc. Photography, 1984, 504, pp. 127–134.
11.
VoloshinA.S.BurgerC.P.Half-fringe photoelasticity: A new approach to whole field analysis. Expl Mechanics, 1983, 23, pp. 304–314.
12.
QuanC.Bryston-CrossP.J.JudgeT.R.Photoelasticity stress analysis using carrier fringe and FFT techniques. Optics and Lasers in Engng, 1993, 18, pp. 79–108.
13.
MorimotoY.MorimotoY.JrHayashiT.Separation of isochromatics and isoclinics using Fourier transform. Expl Techniques, 1994, 18 (5), pp. 13–18.
14.
RednerA.S.Photoelastic measurements by means of computer assisted spectral-contents analysis. In Proceedings of Fifth International Conference onExperimental Mechanics, Montreal, 1984, pp. 421–427.
15.
SanfordR.J.IyengarV.The measurement of the complete photoelastic fringe order using a spectral scanner. In Proceedings of 1985 SEM Spring Conference onExperimental Mechanics, 1985, pp. 160–168.
16.
HaakeS.J.PattersonE.A.Photoelastic analysis of frozen stressed specimens using spectral contents analysis. Expl Mechanics, 1992, 32, pp. 266–272.
17.
AjovalasitA.BaroneS.PetrucciG.Towards RGB photoelasticity: Full-field automated photoelasticity in white light. Expl Mechanics, 1995, 35 (3), pp. 193–200.
18.
Carazo-AlvarezJ. D.HaakeS. J.PattersonE. A.Completely automated photoelastic fringe analysis. Optics and Lasers in Engng, 1994, 21, pp. 133–149.
19.
TheocarisP. S.GdoutosE. E.Matrix Theory of Photo-elasticity, 1979 (Springer-Verlag, Berlin).
20.
WangZ.F.PattersonE.A.Use of phase-stepping with demodulation and fuzzy sets for birefringence measurement. Optics and Lasers in Engng, 1995, 22, pp. 91–104.
21.
JiW.PattersonE.A.Simulation of errors in automated photoelasticity. In Proceedings of SEM Spring Conference onExperimental Mechanics, Bellevue, Washington, 1997, pp. 315–316.
22.
FrochtM.M.Photoelasticity, Vol. 1, 1941 (John Wiley, New York).
23.
PattersonE. A.JiW.WangZ. F.On image analysis for birefringence measurements in photoelasticity. Optics and Lasers in Engng, 1997, 27, pp. 17–36.
24.
PetersenR.E.Stress Concentration Factors, 1971 (John Wiley, New York).
25.
NurseA.D.PattersonE.A.Determination of predominantly mode II stress intensity factors from isochromatic data. Fatigue and Fracture Engng Mater. Structs, 1993, 16 (12), pp. 1339–1354
26.
SanfordR.J.DallyJ.W.A general method for determining mixed mode stress intensity factors from isochromatic fringe patterns. Engng Fracture Mechanics, 1979, 11, pp. 621–683.
27.
MuskhelishviliN.I.Some Basic Problems of the Mathematical Theory of Elasticity, 3rd edition, 1963 (Noordhoff, Groningen).
28.
IsidaM.Effect of width and length on stress intensity factors of internally cracked plates under various loading conditions. Int. J. Fracture Mechanics, 1971, 7 (3), pp. 301–316.
29.
RednerS.New oblique incidence method for direct photoelastic measurement of principal strains. Expl Mechanics, 1963, 3 (3), pp. 67–71.
30.
HungY.Y.PottingerM.G.An improved oblique incidence technique for principal strain separation in photoelastic coatings. Expl Mechanics, 1980, 20 (5), pp. 170–173.
31.
ChaudhariU.M.GodboleP.B.Direct oblique incidence method for reflection photoelasticity. Expl Techniques, 1990, 14 (1), pp. 37–39.
32.
FreemanM. H.Optics, 10th edition, 1990, p. 338 (Butter-worth, London).
