Two methods are developed for determining the stress intensity factors arising at the tip of a crack growing from a semicircular surface notch. The dislocation density method and boundary element formulations are employed, and the technique developed may be readily extended to notches of different forms, and arbitrarily positioned or shaped cracks, while retaining numerical efficiency.
ChenD.NisitaniH.MoriK.‘Stress intensity factors of a semi-infinite plate having a semi-elliptical notch with a crack under tension’, Trans. Japan Soc. Mech. Engrs, 1989, 55, 948–953.
3.
LinS.HillsD. A.NowellD.‘The solution of cracks emanating from circular holes’, J. Strain Analysis, 1996, 31, 235–242.
4.
NowellD.HillsD. A.‘Open cracks at or near free edges’, J. Strain Analysis, 1987, 22, 177–185.
5.
DundursJ.MuraT.‘Interaction between an edge dislocation and a circular inclusion’, J. Mech. Phys. Solids, 1964, 12, 177–189.
6.
KellyP. A.HillsD. A.NowellD.‘The stress concentration produced by a hole near an interface or joint’, Proc. Instn Mech. Engrs, Part C, 1993, 207 (C4), 239–246.
7.
ComninouM.ChangF.-K.‘Effects of partial closure and friction on a radial crack emanating from a circular hole’, Int. J. Fracture, 1985, 28, 29–36.
8.
WarrenW. E.‘The edge dislocation inside an elliptical inclusion’, Mech. of Mater., 1983, 2, 319–330.
9.
DundursJ.SendeckyjG. P.‘Behaviour of an edge dislocation near a bimetallic interface’, J. Appl. Phys., 1965, 36, 3353–3354.
10.
KrenkS.‘On the use of the interpolation polynomial for solutions of singular integral equations. Q. Appl. Math., 1975, 32, 479–484.
11.
LinS.HillsD. A.NowellD.‘Solution of cracks developing from stress raisers, in finite bodies, by a hybrid dislocation density/BEM approach’, Int. J. Fracture, 1996, 77, 175–184.
12.
SturtA.NowellD.HillsD. A.‘Applications of the boundary element and dislocation density methods in plane crack problems’, J. Engng Anal. with Boundary Elements, 1993, 11, 129–135.
