The conventional finite element method has been modified to allow the elastic stresses at the contact surface between two objects to be determined with improved accuracy. Both the problems of frictionless and frictional contacts were studied, and the results obtained by this modified method are compared with both a theoretical and a traditional finite element solution. The comparison shows that the modified solution is in better agreement with the theoretical solution as compared with the traditional solution.
SohA. K.OngL. S.‘Determination of inter and free boundary stresses using surface fitting methods’, J. Finite Elements in Analysis and Des., 1990, 7, 243–252.
2.
SohA. K.SohC. K.‘Determination of inter and free boundary stresses in plate analysis’, J. Engng Mechanics, Trans. ASCE, 1993, 119 (3), 427–438.
3.
BatheK. J.‘Formulation and calculation of isoparametric finite element matrices’, Finite Element Procedures in Engineering Analysis, 1982 (Prentice-Hall, New York), Chapter 5, pp. 194–300.
4.
JohnsonK. L.‘Normal contact of elastic solids: Hertz theory’, Contact Mechanics, 1985 (Cambridge University Press), Chapter 4, pp. 84–106.
5.
ZienkiewiczO. C.TaylorR. L.‘Plane stress and plane strain’, The Finite Element Method, Vol. 1, Fourth Edition, 1989 (McGraw-Hill, London), Chapter 3, pp. 45–71.
6.
BoresiA. P.SidebottomO. M.‘Contact stresses’, Advanced Mechanics of Materials, Fourth Edition, 1985 (John Wiley, New York), Chapter 14, pp. 599–643.
7.
SmithJ. O.LiuC. K.‘Stresses due to tangential and normal loads on an elastic solid with applications to some contact stress problem’, J. Appl. Mechanics, 1953, 21, 157–166.
