Stress concentration factors and elastic-plastic stress and strain predictions for axisymmetric internal projections on hollow tubes subjected to axial loading
Restricted accessResearch articleFirst published online January, 1989
Stress concentration factors and elastic-plastic stress and strain predictions for axisymmetric internal projections on hollow tubes subjected to axial loading
The finite element method has been used to obtain stress concentration factor data for hollow tubes with axisym-metric internal projections subjected to axial loading. A range of geometries has been considered in the investigation, and the results are complementary to previously published data. Preliminary results from an elastic-plastic analysis of a component with an internal projection are presented. Strain predictions with an elastic-perfectly-plastic material model are found to be between those estimated using linear and Neuber rules for low cycle fatigue life predictions.
Get full access to this article
View all access options for this article.
References
1.
PetersonR. E.Stress concentration design factors, 1974, (John Wiley and Sons, New York).
2.
EvansR. A.HardyS. J.HydeT. H.‘Stress concentration factors due to axial loading of axisymmetric external projections on hollow tubes’, J. Strain Analysis, 1987, 22, 1–6.
3.
WoodsP. J.Photoelastic analysis of stresses at loaded projections, MPhil thesis, University of Nottingham, 1978.
4.
HydeT. H.MarsdenB. J.‘Stress concentrations due to axial loading applied to axisymmetric internal projections on hollow tubes’, J, Strain Analysis, 1984, 19, 167–172.
5.
PAFEC Level 6.1, Data Preparation Manual.
6.
HydeT. H.MarsdenB. J.‘Stress concentrations due to axial tension and bending of loaded axisymmetric projections’, J. Strain Analysis, 1983, 18, 7–14.
7.
FuchsH. O.StephensR. I.Metal Fatigue in Engineering, 1980 (John Wiley and Sons, New York).
