The neutron diffraction technique for measuring residual stresses non-destructively in an aluminium alloy weld has been examined. Calibration experiments have been performed to determine the influence of prior plastic strain and surface effects. Comparisons have also been made with strain gauge methods using the destructive block removal and layering technique for measuring the residual stresses. It has been shown that the neutron diffraction method gives an accurate indication of the three dimensional stress distribution present in a weld and that it can also be employed to estimate the amount of prior plastic strain encountered.
FerrillD. A.JuhlP.B.MillerD.R.‘Measurement of residual stresses in a heavy weldment’, Weld. Res., 1966, November, 540S.
3.
UedaY.FukudaK.Tanigawa‘New measuring method of three dimensional residual stresses based on theory of inherent strain’, Trans Japan Weld. Res. Inst.1979, 8, 249–256.
4.
RitchieD.LeggattR. H.‘The measurement of the distribution of residual stresses through the thickness of a welded joint’, Strain, 1987, May, 61–70.
5.
MatharJ.‘Determination of initial stresses by measuring the deformation around drilled holes’, Archiv Eisenhuttenwesen, 1934, 6, 277–281 (Trans ASME, 1934, 36, 249–254).
6.
BeaneyE. M.ProctorE.‘A critical evaluation of the centre hole technique for the measurement of residual stresses’, Strain, 1974, 10, 7–14.
7.
BeaneyE. M.‘Measurement of sub-surface stresses’, CEGB Report RD/B/N4325, July 1978.
8.
JamesM. R.BuckO.‘Quantitative non-destructive measurements of residual stresses’, CRC Crit. Rev. Solid State Mater. Sci., 1981, 9, No. 61.
9.
LangmanR.‘Measurement of the mechanical stress in mild steel by means of rotation of magnetic field strength’, NDT Intl, 1981, 14, 255–262.
MaederG.LebrunJ. L.SprauelJ. M.‘Present possibilities for the X-ray diffraction method of stress measurement’, NDT Intl, 1981, 14, 235–247.
12.
JamesM. R.CohenR. B.‘The measurement of residual stresses by X-ray diffraction techniques’, Expl. Methods Mater. Sci., Treatise on Materials Science and Technology, 1980, 19A, No. 2.
13.
AllenA. J.HutchingsM. T.WindsorC. G.‘Neutron diffraction methods for the study of residual stress fields’, Adv. Phys, 1985, 34, 445–473.
14.
KrawitzA. D.BruneJ. E.SchmankM. J.‘Measurements of stress in the interior of solids with neutrons’, Residual stress and stress relaxation, 1982 (Edited by KulaE.WeissV.) (Plenum Press, New York), pp. 139–155.
15.
PintschoviusL.JungV.MacherauchE.VohringerO.‘Residual stress measurements by means of neutron diffraction’, Mater. Sci. Engng, 1983, 61, 43–50.
16.
StaceyA.MacgillivrayH. J.WebsterG. A.WebsterP. J.ZiebeckK. R.A.‘Measurement of residual stresses by neutron diffraction’, J. Strain Analysis, 1985, 20, 93–100.
17.
LambrineasP.FinlaysonT. R.GriffithsJ. R.HowardC.J.SmithT.F.‘Neutron diffraction residual stress measurements on a thin steel plate sample’, NDT Intl, 1987, 20 (5), 285–290.
Smithells Metals Reference Book, Sixth Edition, 1983 (Edited by BrandsE. A.) Section 15, p. 15–4.
20.
HewatA. W.BaileyI.‘A high resolution neutron powder diffractometer with a bank of mylar collimators’, Nucl. Instrum, Meth., 1976, 137, 463.
21.
ScottM. H.GittosM. F.‘Tensile and toughness properties of arc-welded Al—4.5%Mg—0.8%Mn and Al—1%Si—0.8%Mg—0.7%Mn alloys’, Weld. Inst. Res. Report 163/1981.
22.
LeggattR. H.KamathM. S.‘Residual stresses in 25 mm thick weld metal COD specimens in the as-welded and locally compressed states’, Weld. Inst. Res. Report, 145/1981.
23.
LeggattR. H.‘Residual stresses in MIG welded aluminium alloy panels’ Weld Inst Res Report 340/1987.
