C ∗ correlations for creep crack growth in weld metals

Abstract

Abstract

Creep crack growth tests have been performed on compact tension specimens of 2 1/4CrlMo, C—Mn, and AISI 316 weld metals at 565°C, at 360 and 390°C, and at 600°C, respectively. The data have been analysed in terms of the C∗ creep parameter obtained directly from experimental measurements and by use of estimation formulae which depend on uniaxial creep data and evaluation of a reference stress. When expressed in the form da/dt = D C∗ ^q the two approaches result in correlations which differ both in the constant, D, and in the exponent, q.

The differences in the constant may be largely rationalized in terms of the constraint on deformation appropriate to the test conditions and the effects of this on the reference stress.

The exponent, q, was generally lower when the estimation formulae were used than when C∗ was calculated from measured displacement rates. This was attributed to the lower stress dependence of the load-line displacement rates of the compact tension specimens compared with that of the uniaxial minimum creep rate at similar stress levels. This arises because primary creep strains may dominate the overall deformation behaviour of a compact tension specimen for many practical circumstances.