Monte Carlo simulation techniques are used in conjunction with the pivotal quantities of the two parameter Weibull distribution (or three parameter Weibull distribution with prescribed threshold stress) to calculate confidence bands for the probability of failure of thin annular discs subjected to centrifugal loading. The theoretical predictions, assuming either volume or surface defects govern failure, are compared with experimental fracture data.
Get full access to this article
View all access options for this article.
References
1.
StanleyP.SivillA. D.FesslerH.‘A design exercise for a ceramic turbine disc subjected to centrifugal stresses’, J. Strain Analysis, 1978, 13, 103–114.
2.
WhiteD. C.GriegA. W. M.‘A statistical method for the prediction of component low cycle fatigue life’, Third International Symposium on Air Breathing Engines, 1976, paper no. 76–030.
3.
GodfreyD. J.‘Investigation of the fabrication, formulation, mechanical properties and oxidation behaviour of sintered silicon nitride ceramics using disc specimens’, 1984, ARE, unpublished report.
4.
GodfreyD. J.PitmanK. C.‘Proof testing of ceramics and its application to a defective large ceramic component’, 1984, ARE, unpublished report.
5.
RoseA. P. G.TuckerM. O.‘A fracture criterion for nuclear graphite’, J. Nuclear Mat., 1982, 110, 186–195.
6.
GodfreyD. J.‘A critical review of engineering ceramics relevant to their use in severe thermal environments’, Conference of Non-metallic Materials for the Royal Navy, Manadon, Plymouth, 1975.
7.
StanleyP.FesslerH.SivillA. D.‘An engineer's approach to the prediction of failure probability of brittle components’, Proc. Br. Ceram. Soc., 1973, 22, 453–487.
8.
BatdorfS. B.CroseJ. G.‘A statistical theory for the fracture of brittle structures subjected to non-uniform polyaxial stresses’, Trans. ASME, Ser. E, 1974, 41, 459–464.
9.
MatsuoY.‘Statistical fracture theory for multiaxial stress states using Weibull's three parameter function’, Engng Fracture Mech., 1984, 14, 527–538.
10.
MargetsonJ.‘A statistical theory of brittle failure for an anisotropic structure subjected to a multiaxial stress state’, AIAA/SAE 12th Propulsion Conference, Palo Alto, paper 76–632, 1976.
11.
de S. JayatilakaA.. Fracture of engineering brittle materials, 1979 (Applied Science Publishers, London), p. 117.
12.
MargetsonJ.CooperN. R.‘Brittle material design using three parameter Weibull distributions’, Proc. IUTAM Symp. on Probabilistic Methods in the Mechanics of Solids and Structures, Aeronautical Research Institute of Sweden, 1984.
13.
TimoshenkoS. P.GoodierJ. N.Theory of elasticity, 1970 (McGraw-Hill Kogakusha, Tokyo), p. 80.
14.
DwightH. B.Tables of integrals and other mathematical data, 1961 (Macmillan, New York), p. 260.
15.
TrustrumK.de S. JayatilakaA.‘On estimating the Weibull modulus for a brittle material’, J. mater. Sci., 1979, 14, 1080–1084.
16.
WeibullW.‘A statistical distribution function of wide application’, J. appl. Mech., 1951, 22, 293–297.
17.
BainL. J.Statistical analysis of reliability and life testing models, 1978 (Marcel Dekker, New York), p. 211.
18.
MargetsonJ.LaurillardJ.‘Reliability analysis of structures with Weibull distributions of load and strength to a given confidence level’, PERME, unpublished report, 1982.
GreenJ. R.MargerisonD.Statistical treatment of experimental data, 1978 (Elsevier Scientific, Oxford), p. 93.
21.
JohnsonL. G.‘The median ranks of sample values in their population with an application to certain fatigue studies’, Ind. Math., 1951, 2, 1–9.
22.
JortnerJ.BatdorfS. B.‘Failure statistics and deformation of ATJS graphite discs and bars fractured by spinning, 1’, Engng Fracture Mech., 1979, 13, 631–645.
23.
LamonJ.EvansA. G.‘Statistical analysis of bending strengths for brittle solids: A multiaxial fracture problem’. J. Amer. ceram. Soc., 1983, 66, 177–182.
24.
StanleyP.InancE. Y.‘Assessment of surface and bulk strength of a typical brittle material’, Proc. IUTAM Symp. on Probabilistic Methods in the Mechanics of Solids and Structures, Aeronautical Research Institute of Sweden, 1984.
25.
FesslerH.FrickerD. C.‘Multiaxial strength tests for brittle materials’, J. Strain Analysis, 1984, 19, 197–208.
26.
ChengR. C. H.IlesT. C.‘Confidence bands for cumulative distribution functions of continuous random variables’, Technometrics, 1983, 25, 77–86.
