A computerised design aid for drive shafts with some fatigue considerations

Abstract

A method of designing power transmission drive shafts is described based on two interactive computer programs. The first program can model shafts of any configuration and under any system of loads and supports. The program is based on the finite element method. Reducing the size of the stiffness matrix by storing only the parameters in the matrix bandwidth and by overlaying the stiffness matrices, the problem of using finite element analysis on small memory microcomputers can be solved. A menu allows the designer to specify machine elements, such as spur or bevel gears or pulleys, to be positioned at any point along the shaft. The user can give information of the power transmitted, speed, and details of the physical dimensions of the machine elements which then enables the program to determine the force vectors and apply these to the shaft nodes.

The second program determines the design factors of safety on the basis of both static and cyclic loads. For cyclic loads the factors of safety are based on infinite-life design, using Soderberg and Goodman criteria. The program contains extensive built-in data on endurance strengths, factors influencing the endurance limit, and stress concentration factors.

Get full access to this article

View all access options for this article.

References

Hooke

C. J.

Walton

Beams–I. Finite element analysis of straight beams, 1981 (Technical Software Centre, British Hydrodynamic Research Association, Cranfield).

Walton

Taylor

‘Gearbox design on desktop computers’, Engrs Digest, 1984, 145, No. 12.

Roark

R. J.

Formulas for stress and strain, 1965 (McGraw-Hill New York).

Livesley

R. K.

Matrix methods of structural analysis. 1964 (Pergamon Press, Oxford).

Harris

T. A.

Rolling bearing analysis, 2nd Edition 1984 (John Wiley, New York).

Budynas

R. G.

Advanced strength and applied stress analysis, 1977 (McGraw-Hill, New York).

Shigley

J. E.

Mitchell

L. D.

Mechanical engineering design, 1981 (McGraw-Hill, New York).

Deutshman

A. D.

Machine design, 1975 (Collier Macmillan, London).

Phelan

R. M.

Fundamentals of mechanical design, 1970 (McGraw-Hill, New York).

10.

Marin

Mechanical behaviour of materials, 1962 (Prentice-Hall, Englewood Cliffs, New York), p. 224.

11.

Petersen

R. E.

Stress concentration factors, 1974 (John Wiley, New York).

12.

Pope

J. A.

Metal Fatigue, 1959 (Chapman and Hall, London), p. 56.

13.

Kececioglu

‘Combined bending-torsion fatigue reliability of AISI 4340 steel shafting with K_t = 2.34, ASME Paper No. 74-WA/DE-12, 1974.