An analytical study is performed to investigate the flexibility of nozzless in pressure vessel heads. Classical thin shell theory is employed. Radial flexibility factors for nozzles in hemispherical and ellipsoidal pressure vessel heads are presented as graphs of non-dimensional shell parameters.
RodabaughE. C.AtterburyT. J.‘Flexibility of nozzles in spherical shells’, Phase Report No. 3 to U. S. Atomic Energy Commission, Battelle Memorial Institute, Columbus Memorial Institute, Columbus, OH, Decembe 1967.
3.
MitchellD. W.‘Utilization of flange design and vessel shell properties to eliminate use of metallic expansion joints’, inPracticol considerations in piping analysis, (ASME PVP) Vol. 69, pp. 111–120.
4.
BijlaardP. P.“Stresses in a spherical vessel from radial loads acting on a pipe”, Welding Res. Council Bull., No. 49, April 1959.
5.
GalletlyG. D.‘Bending of 2:1 and 3:1 open-crown cllip-soidal shells’, Welding Res. Council Bull., No. 54, October 1959.
6.
GalletlyG. D.‘Influence coefficients and pressure vessel analysis’, J. Engng Ind., 1960, 82, 259–269.
7.
GalletlyG. D.KynerW. T.MollerC. E.‘Numerical methods and the bending of ellipsoidal shells’, J. Soc. Indust. Appl. Math., 1961, 9, No. 4.
8.
MeissnerE.‘Elasticity problem for thin shells of toroidal, spherical or conical shape’, David Taylor Model Basin Transl., 238, July 1958.
9.
TimoshenkoS. P.Woinowsky-KreigerS.’Theory of plates and shells’, (2nd edition) 1959 (McGraw-Hill, New York).
10.
KalninsA.‘Analysis of shells of revolution subjected to symmetrical and nonsymmetrical loads’, J. appl. Mech., 1964, 31, 467–476.
11.
ChaoY. J.SuttonM. A.‘Stress concentration factors for nozzles in ellipsoidal pressure vessel heads due to thrust loads’, Int. J. Pressure Vessels Piping, to be published.
12.
American Standards Association, Code for Pressure Piping, ASA B31.1–1955, (American Society of Mechanical Engineers, New York).
