Abstract
Abstract
Finite element and ‘upper bound’ predictions of ratchetting and creep are compared with experimental data from two axially loaded shouldered tubes subjected to axisymmetric cyclic temperature variations.
The shouldered tubes were machined from chill-cast bars of a lead alloy material. Electrical resistance strain gauges were used to measure the ratchet and creep strain.
The results show that ratchet strains can accumulate significantly faster in stress concentration regions when compared with plain tube regions. Acceptable predictions were obtained for the ratchet strains. The discrepancies between the predicted and measured dwell period strains were due to neglecting the material plasticity-creep interactions. Some simple methods for estimating the strains are suggested.
Get full access to this article
View all access options for this article.