A report on the Sixth International Conference on Experimental Stress Analysis, held in Munich, Germany, 18th to 22nd September, 1978.
Get full access to this article
View all access options for this article.
References
1.
‘Contribution of experimental stress analysis to safety and economy of technical systems’ by MeyerM. L. (1).
2.
‘Entwicklung und Bedeutung der Modellstatik in Theorie und Praxis’ by LaermannK. H. (11).
3.
‘The contribution of experimental stress analysis to safety and economy in power plant technology’ by KhesinG. (23A).
4.
‘Application of experimental stress analysis in USA aerospace technology’ by RiegnerE. I. (25).
5.
‘Optimisation of photoelastic stress separation procedures’ by AllisonI. M.NurseP. (41).
6.
‘Integrated photoelasticity of cubic single crystals’ by AbenBrosmannE. (45).
7.
‘Eigenschaften einiger spannungsoptischer Modellmaterialien bei γ-Bestrahlung’ by JecicS.KuchR. (51).
8.
‘Photoelastic data acquisition in infrared’ by RednerS. (57).
9.
‘Influence of specimen geometry on crack propagation and arrest behaviour’ by KobayashiT.DallyJ. W.FourneyW. L. (63).
10.
‘Dynamic fracture toughness determination from isopachics of a running crack’ by HollowayD. C.DerV. K.FourneyW. L. (71).
11.
Spannungsoptische Untersuchung von Bruchvorgängen an scheibenförmigen Proben durch Überlagerung von statischer und dynamischer Last’ by KuskeA.AdamisP.DiekmannJ. (77).
12.
‘Acquisition and processing of photomechanical information’ by RowlandsR. L. (83).
13.
‘Stresses at offset-oblique holes in thick-walled cylinders subjected to torsional loading’ by StanleyP.DayB. V. (89).
14.
‘The use of precision cast models to predict diesel engine deformations’ by FesslerH.WhiteheadP. S. (97).
15.
‘Scattered light three-dimensional photoelasticimeter. Application to a blade of a compressor’ by RobertA.RoyerJ. (107).
16.
‘Méthode ponctuelle de détection linéaire en photoélasticimétrie tridimensionnelle–Réalisation d'un photoélasticimètre et application’ by BrillaudJ.LagardeA. (113).
17.
‘Photomechanical determination of stresses in the neighbourhood of loaded holes in anisotropic media’ by WilkinsonT. L.FuchsV. E.RowlandsR. E. (121).
18.
‘Moiré surface contouring by addition method’ by WasowskiJ. J..
19.
‘A moiré fringe data handling system for application in an industrial laboratory’HorschF. J.SchwarzR. C. (135).
20.
‘The development of a laser grating method for the measurement of strain distributions in plane, opaque surfaces’ by SevenhuijsenP. J..
21.
‘Determination of the principle surface strains on arbitrarily deformed objects via tandem speckle photography’ by StetsonK. A.HarrisonI. R. (149).
22.
‘Eine allgemeine holografische Methode zur Bestimmung rämlicher Verschiebungsfelder’ by SchönebeckG. (155).
23.
‘Extrapolation of strain and stress from holographically measured surface displacement’ by DändlikerR. (163).
24.
‘Spannungsbestimmung in Bauteilen auf Grund von Oberflachenverschiebungsmessungen (Holographie)’ by SporriJ. (171).
25.
‘On the use of holographic interferometry in deformation analysis with additional degrees of freedom during the reconstruction’ by SchumannW.DubasM. (175).
26.
‘Noncontact material testing using laser energy deposition and interferometry’ by CalderC. A.WilcoxW. W. (181).
27.
‘Anwendung der holographischen Shearing-Interferometrie zur vollstandigen Bestimmung ebener Spannungszustände in Modellen’ by HospE.KnappJ. (187).
28.
‘Optical measurement of in-plane strain/displacement near crack tips at high temperature’ by SharpeW. N.MartinD. R. (195).
29.
‘Holographic measurement of magnification factors for embedded interacting defects in transparent models’ by FreddiA.PersianiF..
30.
‘Eigenspannungsuntersuchungen an Dampfturbinenkomponenten’ by NowackH.StöckerE.WolfH. (209).
31.
‘Stand und Möglichkeiten der röntgenographischen Spannungsanalyse’ by WolfstiegU. (217).
32.
‘Integralverhalten der Röntgenspannungsmessung’ by PeiterA.LodeW. (227).
33.
‘Eigenspannungen in Schweißnäbten und ihre Auswirkungen’ by ChristianH.ElfingerF. X.SchüllerH. J. (237).
34.
‘Non-destructive stress analysis by acoustoelasticity’ by FukuokaH.ToddH. (245).
35.
‘Mesures extensométriques ‘in Vivo’ en biomécanique osseuse’ by BourgoisR. A.BurnyF. (251).
36.
‘Stress and strain measurements in solids’ by AskegaardV. (259).
37.
‘Fracture behavior of single fibers and paper sheets in the scanning electron microscope’ by KyankaG. H. (269).
38.
‘Spannkraftmessungen in Erdankern—Berechnungsgrundlagen und Anwendung eines neuen Meßgerates’ by MayerN. (275).
39.
‘The Duomorph—An in-situ viscoelastic characterization transducer’ by SaylakD.NoelJ. S.BoggessR. (279).
40.
‘The latest in-foil strain gages versus thin film strain gages’ by OrtW..
41.
‘Small high-elongation foil strain gages as fatigue-damage indicator’ by BandinO. L.GusenkovA. P.SharshukovG. K. (291).
42.
‘Development of 1366 K (2000°F) strain sensor and biaxial strain transducer for use to 1033 K (1400°F)’ by LemcoeM. M. (297).
43.
‘Einsatz von Hochtemperaturdehnungs-Meßstreifen bis 320°C’ by BartonicekJ.SchöckleF. (303).
44.
‘An overview of the use of capacitive strain gages in the United States’ by RolandD. M. (311).
45.
‘Einsatz kapazitiver Dehnungsmeßstreifen für statische Messungen bei hohen Temperaturen’ by SchulzM. (317).
46.
‘Measurement of thermal strains and temperatures in a steam turbine nozzle chamber model’ by MarloffR. H. (323).
47.
‘On the vital role of experimental stress analysis in the numerical design of structures and components’ by PattersonC. (329).
48.
‘Experimental-numerical hybrid technique for stress analysis’ by JacobK. A. (335).
49.
‘Wechseldehnungsmessungen an Modell- und Original-Turbinenschaufeln’ by GloberM.MalyW. (343).
50.
‘Designing the load measuring system for the space shuttle Orbiter/747 carrier aircraft approach and landing tests’ by HarlingD. R. (353).
51.
‘Combined-load testing of the space shuttle insulation at 1100°C’ by DugganM. E. (359).
52.
‘Electro-optical system for measuring dynamic response of tower structures’, by WarrenG. E. (367).
53.
‘Saint-Venant effect in unidirectional composites’, by KornevV. M.BaevL. V.GoreyB. V.DemeshkinA. G. (373).
54.
‘Tensile testing at constant true strain-rates’ by HartleyC. S.JenkinsD. A. (379).
55.
‘Vielstellenmeßanlagen mit Halbleiterschaltern zur präzisen und schnellen Meßwerterfassung’ by KreuzerM. (385).
56.
‘A new experimental method for the accelerated characterization of composite materials’ by BrinsonH. F.MorrisD. H.YeowY. T..
57.
‘Direct determination of flexural strains in plates using projected gratings’ by LiangC. Y.HungY. Y.DurelliA. J.HovanesianJ. D..
58.
‘Applications of holographic and high-frequency moiré techniques in experimental strain studies’ by LefevreT.BooneP.De CaluwéM..
59.
‘Sandwich speckle interferometry’ by BeranekW. J.BruinsmaA. J. A. (417).
60.
‘An impact force measurement barrier for car crashes’ by SulzL..
61.
‘Kraftmessungen an Kraftfahrzeugen bei Aufprallversuchen’ by KochL.StahlR.WagnerE. (433).
62.
‘Photoelastic investigation of impact stresses in discs’ by RobertsonG.KuskeA. (439).
63.
‘Analysis of mechanical vibrations with stroboscopic holographic interferometry in an industrial environment’ by HallW. C. (447).
64.
‘Röntgenographische Ermittlung der bei der Oberflächenbearbeitung von TiA16V4 und TiA16V6 Sn2 entstehenden Eigenspannungszustände’ by FranzH. E. (453).
65.
‘Eigenspannungsmessung an Plattierungen nach dem erweiterten Ring-Kern-Verfahren’ by HoferG.BenderN. (463).
66.
‘A semidestructive method of measuring residual stresses’ by Bijak-ZochowskiM. (469).
67.
‘A new non-destructive method to measure residual stressas’ by FrelatJ.ZarkaJ. (477).
68.
‘Internal stress and birefringence microanalysis of hardened glass plate as well as glass fibre by the optical phase microscope interference-polarisation methods’ by BochynskiZ. (481A).
69.
‘Experimental stress analysis of paints and varnishes’ by EbbeniJ.KestensJ. (483).
70.
‘Sur la détermination des contraintes résiduelles dans les cylindres creux non-homogènes’ by KöoJ. (487).
71.
‘La mesure des contraintes résiduelles. Méthode de la flèche, méthode de la source de contraintes’ by Niku-LariA.FlavenotJ. F. (493).
72.
‘Experimental techniques and the mixed-mode fracture of adhesive joints’, by SykesJ. L.GreeneG. W.ChowC. L. (503).
73.
‘Determination of the structural integrity of metallurgically bonded plates by high energy impulse test’ by NiedH. A. (511).
74.
‘The deformation of steel bars in a four-point bending machine, measured by holographic interferometry’ by ArchboldE.EnnosA. E.VirdeeM. S. (517).
75.
‘Determination of residual stresses on ground and lapped surfaces’ by BatraJ. L. (523A).
76.
‘Stress analysis of viscoelastic bars subjected to impulsive loading’ by NakagawaN.KawaiR.SasakiT. (525).
77.
‘Photoviscoelastic investigations on commercial PVC tubes’ by SrinathL. S.Yogendra SimhaK. R. (531).
78.
‘Einfluß der Spannungskonzentration auf die Ermüdungsfestigkeit geschweißter Konstruktionen’ by HirtM. A.KummerE. (539).
79.
‘Estimation of stress intensity factors by tensometric methods’ by ZlochewskyA. B.BondarovichL. A.ShuvalovA. N. (547).
80.
‘Experimentelle Untersuchung des Einflusses hydrostatischen Drucks auf Dehnungsmeßstreifen-Applikationen und die Ermittlung von Korrekturwerten’ by HoffmannK.JostD.KeilSt. (553).
81.
‘Two-dimensional coordimeter with electric strain gauges’ by Cruz AzevedoM.Esteves FerreiraM. J. (559).
82.
‘Performance of strain-gauge installations in pressurized water at elevated temperatures’ by EngbaeckP.PetersenH.AndersenS. I.‘Capteur de pression à diaphragme in situ: Mesure de la flèche ou des déformations?’ by RumelhartC.TahhanZ.BahuaudI. (573).
83.
‘Actual thermoelastic response of some engineering materials and its applicability in investigations of dynamic response of structures’ by PinderaJ. T.StrakaP.TschinkeM. F. (579).
84.
‘Transducers with liquid crystals for mechanical parameters’ by TeodorescuH. N.SofronE. (585).
85.
‘Fluid wave and force measurement system’ by LarksJ. (589).
86.
‘Instrumentation techniques and data acquisition procedure in low-cycle fatigue tests of shear connectors’ by SabnisG. M.LewH. S..
87.
‘Stress concentration and stress analysis problems in isotropic thick plates’ by KulkarniS. V.SinghS. (767).
88.
‘Multiplication of holographic fringes, its application to crack detection’ by SciammarellaC. A.ChawlaS. K. (775).
89.
‘A study of stress distribution in a point-loaded beam. Comparison between approximate analysis, finite element method and photoelasticity’ by HimTh. H.PhangCh.VercheryG. (781).
90.
‘Die Ausnützung der Kombination des Moiré-Verfahrens mit der Spannungsoptik für die Untersuchung von Platten mit Rippen’ by PavlikM. (785).
91.
‘Neuere Ergebnisse zur Anwendung des Schattenfleckverfahrens auf stehende und schnell-laufende Brüche’ by BeinertJ.KalthoffJ. F.MaierM. (791).
92.
‘Interferenzoptische Messung dynamischer Spannungsverteilungen in stoßbelasteten Platten’ by SoltészU. (799).
93.
‘The application of lasers in construction equipment’ by DrakatosP. A..
94.
‘Spannungsoptische Analyse diskontinuierlicher Gesteinsysteme’ by JavornickyJ.HovorkaM. (811).
95.
‘An experimental technique for measuring the fracture toughness of rocks under downhole stress conditions’ by Abou-SayedA. S. (819).
96.
‘Testing by means of strain gages of the steel high-pressure penstock of large diameter embedded in the rock’ by AbramovićN.AnicićD.ZamoloM. (825A).
97.
‘Probebelastung an der Straßenbrücke bei Drávaszabolcs’ A. Szittner.
98.
‘Considérations concernant la détermination expérimentale du coefficient de maioration dynamique des contraintes de fatigue pour les longerons et pieces de ponts metalliques ferroviaires’ by HalchiniC.SalageanuH. (833).
99.
‘Analysis of stresses in metal constructions and their longevity using the simulation of random loads at laboratory’ by KopeckyM. (837).
100.
‘A method for real-time fatigue damage assessment’ by DonaldsonK. H.MorrowJ. D.SocieD. F. (843).
101.
‘Die Anwendung des Prinzips des Schattenmoiré auf Kontaktprobleme’ by MühlmannChr.IILaermannK.-H. (849).
102.
‘Etude photoélastique d'un bátiment réacteur’JullienF. J.MorelA..
103.
‘Prediction of flaw shapes and stress intensity distributions in 3D problems by the frozen stress method’ by SmithC. W.PetersW. H..
104.
‘Shallow spherical shell on elastic subgrade under ring load along the edge’ by IssaS. S.LaermannK.-H. (865).
105.
‘Modelluntersuchungen zu einem Mehrlagenbehälter ohne Längsnähte’ by HenningG.HordeI.NölkerA.VierlingP. (873).
106.
‘Hochtemperaturdehnungsmessungen an den Stiftschrauben von Kernreaktordruckbehältern’ by JoasH. (879).
107.
‘Mesure de nivellement automatique’ by CousinM.GniewekJ.JullienJ. F. (887).
108.
‘Ausgewählte Beispiele von experimentellen Festigkeitsanalysen im chemischen Apparatebau’ by SchlonskiA. (893).
