The effect of a decrease in stress range on fatigue crack propagation behaviour in mild-steel plate is investigated.
An experimentally determined equation relating the threshold stress intensity factor to stress intensity history is introduced and is seen to be a function of specimen thickness, which determines the crack tip stress—strain state. The delay period between the arrest of a stage II crack and its re-propagation is also a function of stress history and specimen thickness. The effect of increasing the initial high values of stress intensity is to cause the delay period and the threshold stress intensity to increase, both of which are beneficial, i.e. they increase fatigue lifetime.
StephensR. I.ChenD. K.HornB. W.‘Fatigue crack growth with negative stress ratio following single overloads in 2024-T3 and 7075-T6 aluminium’, ASTM STP 5951976, 27.
6.
SideyD.‘The measurement of crack growth in metals by the electrical potential method’, CUED/C- MAT/TR9 May 1973, Cambridge University.
7.
SmithR. A.Fatigue crack propagation from notches Ph.D. Thesis, University of Cambridge, 1975.
8.
GrossB.SrawleyJ. E.BrownW. F.Jr‘Stress intensity factors for a single edge-notch tension specimen by collocation of a stress function’, Tech. Note D-2395, D-2396, NASA, August 1964.
ParisP. C.BucciR. J.WesselE. T.ClarkW. G.MagerT. R.‘Extensive study of low fatigue crack growth rates in A533 and A508 steels’, ASTM STP 5131972141–176.
11.
PriddleE. K.‘Determination of the threshold for fatigue crack propagation using a novel random amplitude growth technique’, CEGB-RD/B/N3235, June 1975.
12.
PookL. P.‘Fatigue crack growth data for various materials deduced from the fatigue lives of precracked plates’, ASTMSTP 5131972, 106–124.
13.
PellouxR. M.‘Mechanisms of formation of ductile fatigue striations’, ASM Trans. Quart.196962, 281.
14.
LankfordJ.DavidsonD. L.‘Fatigue crack tip plasticity associated with overloads and subsequent cycling’, Southwest Research Institute, San Antonio, Texas.
15.
OhmuraT.PellouxR. M.GrantN. J.‘High temperature fatigue crack growth in a cobalt base super alloy’, Engineering fracture mechanics19735, 909–922.
16.
RitchieR. O.KnottJ. F.‘Mechanisms of fatigue crack growth in low alloy steel’, Acta metallurgica197321, 639–648.
17.
BucciR. J.ClarkW. J.JrParisP. C.‘Fatigue crack propagation growth rates under a wide variation of ΔK for an ASTM A517 grade F(T-1) steel’, ASTM STP 5131972, 177–195.
18.
KlesnilM.LukášP.‘Influence of strength and stress history on growth and stabilisation of fatigue cracks’, Engineering fracture mechanics19724, 77–92.
19.
ElberW.‘Damage tolerance in aircraft structures’, ASTM STP 4861971, 230.
20.
HoC. L.BuckO.MarcusH. L.‘Application of strip model to crack tip resistance and crack closure phenomena’, ASTM STP 5361973, 5–21.
21.
SrawleyJ. E.‘On the sharpness of cracks compared with Wells’ COD’, NASA TMX-529041970.
22.
SchijveJ.‘Fatigue damage accumulation and incompatible crack front orientation’, Engineering fracture mechanics19746, 245.
23.
BernardP. J.LindleyT. C.RichardsC. E.‘The mechanisms of overload retardation during fatigue crack propagation’CEGB, RD/L/N 104/75, August 1975.
24.
MillsW. J.Load interaction effects on fatigue crack growth in 2024-T3 aluminium and A514 F steel alloys Ph.D. Thesis, Lehigh University, 1975.
25.
JonasO.WeiR. P.‘An exploratory study of delay in fatigue crack growth’, International Journal of fracture mechanics19717, 116–118.
