General reference section

Griffith A. A. ‘The phenomena of rupture and flow in solids’, Phil. Trans. Roy. Soc. 1921 A221, 163.

Bueckner H. F. ‘Propagation of cracks and the energy of elastic deformation’, Trans. Am. Soc. Mech. Engrs. 1958 80E, 1225.

Muskhelishvili N. I. Some basic problems of the mathematical theory of elasticity Translated by J. R. M. Radok 1963 (P. Noordhoff Ltd., Groningen).

Griffith A. A. ‘The theory of rupture’, Proc. 1st Int. Congr. Appl. Mech. Delft, 1924.

Irwin G. R. ‘Fracture dynamics’, in Fracturing of metals ASM Cleveland, 1948.

Orowan E. ‘Fracture and strength of solids’, Rep. Prog. Phys. 1949 12, 185.

Orowan E. ‘Energy criteria of fracture’, Weld. J. Res. Suppl, 1955 20, 157s.

Felbeck D. K. Orowan E. ‘Experiments on brittle fracture of steel plates’, Weld. J. Res. Suppl. 1955 34, 570s.

Irwin G. R. Kies J. A. ‘Fracturing and fracture dynamics’, Weld. J. Res. Suppl. 1952 17, 95s.

Love A. E. A treatise on the mathematical theory of elasticity 4th ed. 1944 (Dover, New York).

Day E. E. ‘Strain energy release rate determination for some perforated structural members’, Weld. J. Res. Suppl. 1956 21, 60s.

Srawley J. E. Jones M. H. Gross B. ‘Experimental determination of the dependence of crack extension force on crack length for a single-edge-notch tension specimen’, 1964 NASA TND-2396.

Irwin G. R. ‘Analysis of stresses and strains near the end of a crack traversing a plate’, J. Appl. Mech. 1957 24, 361.

Irwin G. R. ‘Relation of stresses near a crack to the crack extension force’, 9th Int. Congr. Appl. Mech. Brussels, 1957.

Irwin G. R. ‘Analysis of stresses and strains near the end of a crack traversing a plate’, J. Appl. Mech. 1957 24, 361.

Irwin G. R. ‘Relation of stresses near a crack to the crack extension force’, 9th Int. Congr. Appl. Mech. Brussels, 1957.

Westergaard H. M. ‘Bearing pressures and cracks’, J. Appl. Mech. 1939 61, A49.

Sih G. C. ‘Application of strain-energy-density theory to fundamental fracture problems’, Technical Report AFOSR-TR-73–1, 1973.

Wigglesworth L. A. ‘Stress distribution in a notched plate’, Mathematika 1957 4, 76.

Williams M. L. ‘On the stress distribution at the base of a stationary crack’, J. Appl. Mech. 1957 24, 109.

Erdogan F. ‘On the stress distribution in plates with colinear cuts under arbitrary loads’, Proc. 4th U.S. Natn. Congr. on Appl. Mech. Berkeley, 1962.

Irwin G. R. ‘Crack extension forces for a part through crack in a plate’, J. Appl. Mech. 1962 29, 651.

Paris P. C. Sih G. C. Erdogan F. ‘Crack tip stress intensity factors for plane extension and plate bending problems’, J. Appl. Mech. 1962 29, 306.

Sih G. C. ‘On the singular character of thermal stresses near a crack tip’, J. Appl. Mech. 1962 29, 587.

Bowie O. L. ‘Rectangular tensile sheet with symmetric edge cracks’, J. Appl. Mech. 1964 31, 208.

Paris P. C. Sih G. C. ‘Stress analysis of cracks’ in Fracture toughness testing and its applications 1965 (ASTM STP 381, Philadelphia).

Sih G. C. ‘Stress distribution near internal crack tips for longitudinal shear problems’, J. Appl. Mech. 1965 32, 51.

Knowles J. K. Wang N. ‘On the bending of an elastic plate containing a crack’, J. Math. and Phys. 1960 39, 223.

Sih G. C. Hagendorf H. C. ‘A new theory of spherical shells with cracks’ in Thin-shell structures Ed. by Fung Y. C. Sechler E. E. , 1974 (Prentice-Hall, Englewood Cliffs).

Bercoz D. Radenkovic D. ‘On the definition of stress intensity factors in cracked plates and shells’, 2nd Int. Conf. on Pressure Vessel Technology, San Antonio, 1973.

Irwin G. R. ‘Fracture mode transition for a crack traversing a plate’, J. Basic Engng. 1960 82, 417.

Liu H. W. Discussion in Fracture toughness testing and its applications 1965 (ASTM STP 381, Philadelphia).

Larsson S. G. Carlsson A. J. ‘Influence of non-singular stress terms on small scale yielding at crack tips in elastic-plastic materials’, 3rd Int. Conf. on Fracture, Munich, 1973.

Tada H. The stress analysis of cracks handbook 1973 (Del. Research Corp. Hellertown).

Brown W. F. Srawley J. E. Plane strain crack toughness testing 1967 (ASTM STP 410, Philadelphia).

Griffith A. A. ‘The phenomena of rupture and flow in solids’, Phil. Trans. Roy. Soc. 1921 A221, 163–198.

Knott J. F. ‘Fundamentals of fracture mechanics’ 1st Edition 1973 (Butterworths, London).

British Standards Institution, Draft for Development DD3. ‘Methods for plane strain fracture toughness (K_IC) testing’.

Wilson W. K. Contribution to discussion ‘Plane strain crack toughness testing of high strength metallic materials’ ASTM STP 410, 1969, 75–76.

Dugdale D. S. ‘Yielding of steel sheets containing slits’, Jnl. Mech. Phys. Solids 1960 8, 100–104.

Bilby B. A. Cottrell A. H. Swinden K. H. ‘The spread of yield from a notch’, Proc. Roy. Soc. 1963 A272, 304–314.

Burdekin F. M. Stone D. E. W. ‘The crack opening displacement approach to fracture mechanics in yielding materials’, Jnl. Strain Analysis 1966 1, 145–153.

Rice J. R. ‘Crack tip plasticity and fracture initiation criteria’ Third International Congress on Fracture, Munich 1973, paper 441.

Larsson S. G. Carlsson A. J. ‘Influence of non-singular stress terms on small scale yielding at crack tips in elastic-plastic materials’, 3rd Int. Conf. on Fracture, Munich, 1973.

Rice J. R. ‘Limitations to the small-scale yielding approximation for crack tip plasticity’, Jnl. Mech. Phys. Solids, 1974 22, 17–26.

Lewis I. D. Smith R. F. Knott J. F. ‘On the a/W ratio in plane strain fracture toughness testing’, Int. Journ. of Fracture 1975 11, 179–183.

Rice J. R. ‘A path independent integral and the approximate analysis of strain concentration by notches and cracks’, Jnl. Appl. Mechanics 1968 (June) 379–386.

Heald P. T. Spink G. M. Worthington P. J. ‘Post yield fracture mechanics’, Mat. Sci. Eng. 1972 10, 129–138.

Chell G. C. Kirby J. to be published, Metals Technology.

Begley J. A. Landes J. D. ‘The effect of specimen geometry on J_IC’, ASTM STP 514, 1972, 24–39.

Knott J. F. ‘Some effects of hydrostatic tension on the fracture behaviour of mild steel’, Jnl. Iron and Steel Inst. 1966 204, 104–111.

Tracey D. M. Ph.D. Thesis, Brown University 1973.

Ritchie R. O. Rice J. R. Knott J. F. ‘On the relationship between critical tensile stress and fracture toughness in mild steel’, Jnl. Mech. Phys. Solids 1973 21, 395–410.

Green G. Knott J. F. ‘The effect of specimen size on the ductile/brittle transition temperature in A533B pressure vessel steel’ to be presented at the conference, ‘Materials defects of steel products’, Karlovy Vary, Czechoslovakia 17–19 Sept. 1975.

Geniets L. C. E. Ritchie R. O. Knott J. F. ‘Effects of grain-boundary embrittlement on fracture and fatigue crack propagation in a low-alloy steel’. ‘The micro-structure and design of alloys’ Third Intl. Conf. on Strength of Metals and Alloys, Cambridge 1973, Inst. Metals/I.S.I., 124–128.

Green G. Knott J. F. ‘The initiation and propagation of ductile fracture in low strength steels’, to be presented at conference ‘Micromechanical modelling of deformation and fracture’, ASME Tray 23–25 June 1975 and to be published (JEMT).

Elliott D. ‘Crack tip processes leading to fracture’ in ‘The practical implications of fracture mechanisms’, Inst. of Metallurgists 1973, 21–27.

Green G. Smith R. F. Knott J. F. ‘Metallurgical factors in low temperature slow crack growth’, Conference on Mechanics and Mechanisms of Crack Growth, Cambridge 1973, British Steel Corporation, paper 5.

Rice J. R. Johnson M. A. ‘The role of large crack tip geometry changes in plane strain fracture’, ‘Inelastic behaviour of solids’ ed. Kannirren M. F. , McGraw-Hill 1970, 641–661.

Chipperfield C. G. Knott J. F. ‘Microstructure and toughness of structural steels’, Metals Technology 1975 2, 45–51.

Clayton J. Q. Knott J. F. ‘Observation of fibrous fracture modes in a prestrained low alloy steel’, Submitted to Metal Science.

Hahn G. T. Rosenfield A. R. ‘Sources of fracture toughness: The relationship between K_IC and the ordinary tensile properties of metals’, Applications Related Phenomena in Titanium Alloys ASTM STP 432, 1968, 5–32.

Garrett G. G. Ph.D. Thesis, Cambridge reported in KNOTT, J. F. Proc. Conference ‘Mechanics and physics of fracture’, IOP/Metals Society, Cambridge 1975, paper 9.

Burdekin F. M. Dawes M. G. ‘Practical use of linear elastic and yielding fracture mechanics with particular reference to pressure vessels’, Proc. Inst. Mech. Engrs. Conf. on ‘Practical applications of fracture mechanics to pressure vessel technology’, 1971, 28–37.

Barenblatt G. I. ‘The mathematical theory of equilibrium cracks in brittle fracture’, Advances in Applied Mechanics 1962 7, 55.

Wells A. A. ‘Unstable crack propagation in metals: Cleavage and fast fracture’. Crack Propagation Symposium, Cranfield, 1961.

Burdekin F. M. Stone D. E. W. J. Strain Anal. 1966 1, (2), 145.

Bilby B. A. Cottrell A. H. Smith E. Swinden K. H. Proc. Roy. Soc. A 1964 279, 1.

Rosenfield A. R. Dai P. K. Hahn G. T. Proc. 1st Int. Conf. on Fracture, Sendai, 1965, 1, 223, Japanese Soc. for Strength and Fracture of Materials, Tokyo.

Wells A. A. J. Eng. Fract. Mech. 1, (3), (1968–70), 399.

Heald P. T. Spink G. M. Worthington P. J. ‘Post yield fracture mechanics’, Mat. Sci. Eng. 1972 10, 129–138.

Hayes D. J. Williams J. G. Int. J. Fract. Mech. 1972 8, 239.

Nichols R. W. Burdekin F. M. Cowan A. Elliott D. Ingham T. Practical Fracture Mechanics for Structural Steel (Proc. Conf. Culcheth, 1969), UKAEA/Chapman and Hall, 1969, Section F.

Smith R. F. Knott J. F. Practical Application of Fracture Mechanics to Pressure Vessel Technology, Inst. Mech. Engrs., London, 1971, 65.

Kanazawa T. Machida S. Miyata T. Prospects of Fracture Mechanics, Ed. van Sih Elst , Broek. Noordhoff Inst. (Leyden) 1974, 547.

Burdekin F. M. Dawes M. G. ‘Practical use of linear elastic and yielding fracture mechanics with particular reference to pressure vessels’, Proc. Inst. Mech. Engrs. Conf. on ‘Practical applications of fracture mechanics to pressure vessel technology’, 1971, 28–37.

Dawes M. G. ‘Fracture control in high yield strength weldments’, Weld. Res. Suppl. Sept. 1974.

Document X-WGSD-13, 1974. Int. Inst. Weld. Assessment of the significance of defects.

Hutchinson J. W. J. Mech. Phys. Solids 1968 16, 13.

Rice J. R. Rosengren G. F. J. Mech. Phys. Solids 1968 16, 1.

Rice J. R. ‘A path independent integral and the approximate analysis of strain concentration by notches and cracks’, Jnl. Appl. Mechanics 1968 (June) 370.

Eshelby J. D. Solid State Physics 3, Academic Press, New York 1956, 79.

Chergpanov G. P. J. App. Math. Mech. 1967 31, 503.

Mcclintock F. Fracture, An Advanced Treatise 3, (Ed. Liebowitz ), Academic Press, New York, 1971, Chap. 2.

Larsson S. G. Carlsson A. F. J. Mech. Phys. Solids 1973 21, 263.

Hilton P. D. Sih G. C. Mechanics of Fracture, 1, Methods of analysis and solutions of crack problems. (Ed. Sih ), Noordhoff, 1973, 426.

Miller K. J. Kfouri A. P. Int. J. Fract. 1974 10, 393.

Hayes D. J. Some applications of elastic-plastic analysis to fracture mechanics. Ph.D. Thesis, University of London, 1970.

Boyle E. F. Calculations of elastic and plastic crack extension forces. Ph.D. Thesis, Queen's University, Belfast, 1972.

Sumpter J. D. G. Elastic-plastic fracture analysis and design using the finite element method. Ph.D. Thesis, London University, 1974.

Bucci R. J. Paris P. C. Landes J. D. Rice J. R. STP 514, ASTM, Philadelphia, 1972, 40.

Heald P. T. Spink G. M. Worthington P. J. ‘Post yield fracture mechanics’, Mat. Sci. Eng. 1972 10, 129–138.

Landes J. D. Begley J. A. STP 514, ASTM, Philadelphia, 1972, 24.

Rice J. R. Paris P. C. Merkle J. G. Progress in flaw growth and fracture toughness testing. STP 536, ASTM, Philadelphia, 1973.

Heald P. T. Spink G. M. Worthington P. J. ‘Post yield fracture mechanics’, Mat. Sci. Eng. 1972 10, 129–138.

Robinson J. N. ‘An experimental investigation of the effect of specimen type on the crack tip opening displacement and J integral fracture criterion’. (To be published.)

Rice J. R. Fracture, an advanced treatise, Ed. Liebowitz, 2, Academic Press, New York, 1971, Chapter 3.

Burdekin F. M. Turner C. E. Atomic energy review 1974 12, (3), 439.

Griffith A. A. ‘The phenomena of rupture and flow in solids’, Phil. Trans. Roy. Soc. 1921 A221, 163–198.

Griffith A. A. ‘The theory of rupture’, Proc. 1st Int. Congr. Appl. Mech. Delft, 1924.

Irwin G. R. ‘Fracture dynamics’, in Fracturing of metals ASM Cleveland, 1948 147–166.

Orowan E. ‘Fatigue and fracture of metals’, MIT Symposium 1950, pp. 139–167, Wiley 1952.

Paris P. C. Sih G. C. ‘Stress analysis of cracks’ in Fracture toughness testing and its applications 1965 (ASTM STP 381, Philadelphia).

Tada H. Paris P. Irwin G. ‘The stress analysis of cracks handbook’, DEL Research Corporation, Hellertown, Pennsylvania 1973.

Sih G. C. ‘Handbook of stress intensity factors’, Lehigh University, Bethlehem, Pennsylvania 1973.

Rooke D. P. Cartwright D. J. ‘Compendium of stress intensity factors’, Her Majesty's Stationery Office 1975.

Liebowitz H. (Ed.) ‘Fracture’, 1–7, Academic Press 1968.

Sih G. C. (Ed.) ‘Methods of analysis and solution of crack problems’, Noordhoff 1973.

Cartwright D. J. Rooke D. P. ‘Methods of determining stress intensity factors’, Technical Report TR73031, Royal Aircraft Establishment, Farnborough (1973.

Westergaard H. M. ‘Bearing pressures and cracks’, J. Appl. Mech. 1939 61, A49.

Irwin G. R. ‘Fracture’ Handbuch der Physik VI, 551–590, Springer-Verlag, Berlin (1958).

Irwin G. R. ‘Structural mechanics’, 557–594, Pergamon, New York (1960).

Tada H. ‘Westergaard stress functions for several periodic crack problems’, Engng fracture Mech. 1970 2, 177–180.

Muskhelishvili N. I. Some basic problems of the mathematical theory of elasticity Translated by J. R. M. Radok 1963 (P. Noordhoff Ltd., Groningen).

Sih G. C. ‘Application of Mushkelishvili's method to fracture mechanics’, Trans. Chinese Assoc. for Advanced Studies 1962, 3, 25.

Erdogan F. ‘On the stress distribution in plates with colinear cuts under arbitrary loads’, Proc. 4th U.S. Natn. Congr. on Appl. Mech. Berkeley, 1962.

Savin G. N. ‘Stress distribution round holes’, NASA Technical Translation, NASA TT F-607 1970.

Sih G. C. ‘Stress distribution near internal crack tips for longitudinal shear problems’, J. Appl. Mech. 1965 32, 51.

Shiriaev E. A. ‘Torsion of circular bars with two cuts’, Prikl. Mat. Mekh. 1958 22, 549–553.

Williams M. L. ‘On the stress distribution at the base of a stationary crack’, J. Appl. Mech. 1957 24, 109.

Timoshenko S. D. Goodier J. N. ‘Theory of elasticity’. 3rd Ed. McGraw-Hill 1970.

Gross B. Srawley J. E. ‘Stress intensity factors for single edge notch specimens in bending or combined bending and torsion by boundary collocation of a stress function’, NASA TN D-2603 1965.

Gross B. Srawley J. E. Brown W. F. ‘Stress intensity factors for a single edge notch tension specimen by boundary collocation of a stress function’, NASA TN D-2395 1964.

Gross B. Srawley J. E. ‘Stress intensity factors for three point bend specimens by boundary collocation’, NASA TN D-3092 1965.

Gross B. Srawley J. E. ‘Stress intensity factors by boundary collocation for single-edge-notch specimens subject to splitting forces’, NASA TN D-3295 1966.

Gross B. Srawley J. E. ‘Stress intensity factors for crackline-loaded edge-crack specimens’, NASA TN D-3820 1967.

Williams M. L. ‘The stresses around a fault or crack in dissimilar media’, Bull. Seismological Soc. of America 1959 49, 199–204.

Sih G. C. Rice J. R. ‘The bending of plates of dissimilar materials with cracks’, J. Appl. Mech. 1964 31, 477–490.

Sawyer S. G. ‘A stress intensity factor approach to the analysis of interfacial cracks in fibre reinforced composite material’, Ph.D. Thesis, Carnegie-Mellon University.

Kobayashi A. S. Cherepy R. D. Kinsel W. C. ‘A numerical procedure for estimating the stress intensity factor of a crack in a finite plate’, J. Bas. Engg. 1964 86, 681–684.

Vooren J. V. ‘Remarks on an existing numerical method to estimate the stress intensity factor of a straight crack in a finite plate’, J. Bas. Engg. 1967 89, 235–237.

Newman J. C. ‘An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries’, NASA TN D-6376 1971.

Isida M. Itagaki Y. ‘Stress concentration at the tip of a central transverse crack in a stiffened plate subject to tension’, Proc. 4th U.S. National Congress of Appl. Mech. 1962 2, 955–969.

Isida M. ‘Stress intensity factors for the tension of an eccentrically cracked strip’, J. Appl. Mech. 1966 33, 674–675.

Isida M. ‘On the determination of stress intensity factors for some common structural problems’, Engg. Fracture Mech. 1970 2, 61–79.

Isida M. ‘Analysis of stress intensity factors for plates containing random array of cracks’, Bull. JSME 1970 13, 635–642.

Isida M. ‘Effect of width and length on stress intensity factors of internally cracked plates under various boundary conditions’, Int. J. Fracture Mech. 1971 7, 301–316.

Bowie O. L. ‘Analysis of an infinite plate containing radial cracks originating at the boundary of an internal circular hole’, J. Math Phys. 1956 25, 60–71.

Bowie O. L. ‘Rectangular tensile sheet with symmetric edge cracks’, J. Appl. Mech. 1964 31, 208.

Bowie O. L. Neal D. M. ‘Single edge crack in rectangular tensile sheet’, J. Appl. Mech. 1965 32, 708–709.

Rich T. P. Roberts R. ‘Stress intensity factors for plate bending’, J. Appl. Mech. 1967 34, 777–779.

Bloom J. M. ‘The short single edge crack specimen with linearly varying end displacements’, Int. J. Fracture Mech. 1966 2, 597–603.

Akao H. T. Kobayashi A. S. ‘Stress intensity factor for a sshort edge-notched specimen subjected to three point loading’, J. Bas. Engg. 1967 89, 7–12.

Neal D. M. ‘Stress intensity factors for cracks emanating from rectangular cutouts’, Int. J. Fracture Mech. 1970 6, 393–400.

Bowie O. L. Neal D. M. ‘A modified mapping-collocation technique for accurate calculation of stress intensity factors’, Int. J. Fracture Mech. 1970 6, 199–206.

Bowie O. L. Freese C. E. ‘Central crack in plane orthotropic rectangular sheet’, Int. J. Fracture Mech. 1972 8, 49–58.

Bowie O. L. Freese C. E. ‘Elastic analysis for a radial crack in a circular ring’, Engg. Fract. Mech. 1972 4, 315–321.

Bowie O. L. Freese C. E. Neal D. M. ‘Solution of plane problems of elasticity utilizing partitioning concepts’, J. Appl. Mech. 1973 40, 767–772.

Neuber H. ‘Theory of notch stresses’, Springer Berlin 1958.

Harris D. O. ‘Stress intensity factors for hollow circumferentially notched round bars’, J. Bas. Engg. 1967 89, 49–54.

Pook L. P. Dixon J. R. ‘Fracture toughness of high-strength materials: Theory and practice’, ISI Publ. 1970 120, 45–50.

Irwin G. R. ‘Analysis of stresses and strains near the end of a crack traversing a plate’, J. Appl. Mech. 1957 24, 361.

Sih G. C. Liebowitz H. ‘Fracture’, 2 (2), Academic Press, 1968.

Barenblatt G. I. ‘Advances in applied mechanics’, 7, 55–111, Academic Press 1962.

Emery A. F. Walker G. E. ‘Stress intensity factors for edge cracks in rectangular plates with arbitrary loadings’, Report No. SCL-DC-67–105, Dept. Mech. Engg., University of Washington, Seattle 1968.

Chell G. G. ‘The stress intensity factor for a crack in a plate subject to an arbitrary stress and with displacement boundary conditions on its ends’, Report No. RD/L/N 26/74 Central Electricity Research Laboratories, Leatherhead, Surrey 1974.

Sneddon I. N. Lowengrub M. ‘Crack problems in the classical theory of elasticity’, Wiley 1969.

Rooke D. P. Sneddon I. N. ‘The crack energy and the stress intensity factor for a cruciform crack deformed by internal pressure’, Int. J. Engg. Sci. 1969 7, 1079–1089.

Tweed J. ‘The solution of certain triple integral equations involving inverse mellin transforms’, Glasgow Math. J. 1973 14, 65–72.

Tweed J. Rooke D. P. Das S. C. ‘The stress intensity factor of a radial crack in a finite elastic disc’, Int. J. Engg. Sci. 1972 10, 323–335.

Rooke D. P. Tweed J. ‘The stress intensity factors of a radial crack in a finite rotating elastic disc’, Int. J. Engg. Sci. 1972 10, 709–714.

Tweed J. Rooke D. P. ‘The torsion of a circular cylinder containing a symmetric array of edge cracks’, Int. J. Engg. Sci. 1972 10, 801–812.

Smetanin R. J. ‘The problem of extension of an elastic space containing a plane annular slit’, PMM 1968 32, 458–462.

Fichter W. B. ‘Stresses at the tip of a longitudinal crack in a plate strip’, NASA TR-R-265 1967.

Atkinson C. ‘On dislocation densities and stress singularities associated with cracks and pile ups in homogeneous media’, Int. J. Engg. Sci. 1972 10, 45.

Atkinson C. ‘The interaction between a crack and an inclusion’, Int. J. Engg. Sci. 1972 10, 127–136.

Romoualdi J. P. Frasier J. T. Irwin G. R. ‘Crack extension force near a riveted stringer’, N.R.L. Report 4956, Washington D.C. 1957.

Bloom J. M. Sanders J. L. ‘The effect of a riveted stringer on the stress in a cracked sheet’, J. Appl. Mech. 1966 33, 561–570.

Kanazawa T. Machida S. Ohyagi M. ‘Some basic considerations on crack arresters - Part V’, J. Soc. Naval Arch. Japan 1967, 122, 200–214: R.A.E. Library Translation No. 1648, 1972.

Madison R. B. ‘Application of fracture mechanics to bridges’, Ph.D. Thesis, Lehigh University 1969.

Poe C. C. ‘Stress intensity factors for a cracked sheet with riveted and uniformly spaced stringers’, NASA Tech. Report R-358 1971.

Poe C. C. ‘The effect of broken stringers on the stress intensity factor for a uniformly stiffened sheet containing a crack’, NASA Tech. Report TMX-71947 1973.

Vlieger H. ‘The residual strength characteristics of stiffened panels containing fatigue cracks’, Engg. Fract. Mech. 1973 5, 447–477.

Swift T. ‘The effects of fastener flexibility and stiffener geometry on the stress intensity in stiffened cracked sheets’, Douglas Paper 6211, McDonnell Douglas Corporation, Long Beach, California. Presented at Conf. on Prospects of Fracture Mechanics, Delft 1974.

Arin K. ‘A plate with a crack, stiffened by a partially debonded stringer’, Engg. Fract. Mech. 1974 6, 133–140.

Miller M. Cartwright D. J. ‘Stress intensity factors for a crack in two intersecting uniformly stressed sheets’, Int. J. Engg. Sci. 1974 12, 353–359.

Picard E. ‘Traite d'analyse’ 2, 1893.

Smith F. W. Emery A. F. Kobayashi A. S. ‘Stress intensity factors for semicircular cracks’, J. Appl. Mech. 1967 34, 953–959.

Smith F. W. Alavi M. J. ‘Stress intensity factors for a penny shaped crack in a half space’, Engg. Fracture Mech. 1971 3, 241–254.

Smith F. W. Alavi M. J. ‘Stress intensity factors for a part circular surface flaw’, Dept. Mech. Engg., Colorado State University.

Thresher R. W. Smith F. W. ‘Stress intensity factors for a surface crack in a finite solid’, J. Appl. Mech. 1972 39, 195–200.

Smith F. W. ‘Stress intensity factors for a semi-elliptical surface flaw’, Boeing Company, Structural Development Research Memorandum No. 17. 1966.

Shah R. C. Kobayashi A. S. ‘Stress intensity factor for an elliptical crack approaching the surface of a plate in bending’, ASTM STP 513 1972, 3–21.

Shah R. C. Kobayashi A. S. ‘The surface crack: Physical problems and computational methods’, ASME, New York. 1972.

Shah R. C. Kobayashi A. S. ‘Stress intensity factors for an elliptical crack approaching the surface of a semi-infinite solid’, Int. J. Fracture Mech. 1973 9, 133–146.

Zienkiewitz O. C. Cheung Y. K. ‘The finite element method in structural and continuum mechanics’, McGraw-Hill. 1967.

Jerram K. Hellen T. K. ‘Finite element techniques in fracture mechanics’, Proc. Inter. Conf. on Welding Research related to power plant, CEGB, Marchwood Engg. Laboratories. 1972.

Oglesby J. J. Lomacky O. ‘An evaluation of finite element methods for computation of elastic stress intensity factors’, J. Engg. for Industry 1973 95, 177–185.

Chan S. K. Tuba I. S. Wilson W. K. ‘On the finite element method in linear fracture mechanics’, Scientific Paper 68-ID7-FMPWR-PI, Westinghouse Research Laboratories, Pittsburgh, Pennsylvania. 1968.

Kobayashi A. S. Maiden D. E. Simon J. B. Iida S. ‘Application of finite element analysis method to two-dimensional problems in fracture mechanics’, Publication 69-WA/PVP-12, American Society of Mechanical Engineers. 1969.

Anderson G. P. Ruggles V. L. Stibor G. S. ‘Use of finite element computer programs in fracture mechanics’, Int. J. Fracture Mech. 1971 7, 63–76.

Wilson W. K. Thompson D. G. ‘On the finite element method of calculating stress intensity factors for crack plates in bending’, Engg. Fracture Mech. 1971 3, 97–102.

Myamoto H. Miyoshi T. ‘Analysis of stress intensity factor for surface-flawed tension plate’, presented at the colloquium of IUTAM ‘High speed computing of elastic structures’, Liege. 1970.

Hayes D. J. Some applications of elastic-plastic analysis to fracture mechanics. Ph.D. Thesis, University of London, 1970.

Bueckner H. F. ‘Propagation of cracks and the energy of elastic deformation’, Trans. Am. Soc. Mech. Engrs. 1958 80E 1225–1230, 1958.

Jerram K. ‘The use of a finite element stress analysis computer program for the calculation of stress intensity factors’, Report No. RD/B/N1521, Central Electricity Generating Board, Berkeley Nuclear Laboratories. 1970.

Hellen T. K. ‘The calculation of stress intensity factors using refined finite element techniques’, Research Report RD/B/N2583, Central Electricity Generating Board, Berkeley Nuclear Laboratories. 1973.

Swanson S. R. ‘Finite element solutions for a cracked two layered elastic cylinder’, Engg. Fracture Mech. 1971 3, 283–289.

Dixon J. R. Pook L. P. ‘Stress intensity factors calculated generally by the finite element technique’, Nature 1969 224, 166–167.

Adams N. J. I. ‘The effect of curvature on stress intensity and crack growth in shells’, Ph.D. Thesis, University of Southampton. 1969.

Mowbray D. F. ‘A note on the finite element method in linear fracture mechanics’, Engg. Fracture Mech. 1970 2, 173–176.

Cartwright D. J. ‘Stress intensity factors and residual static strength of certain cracked structural elements’, Ph.D. Thesis, University of Southampton. 1971.

Wilson W. K. ‘On combined mode fracture mechanics’, Research Report 69–1E7-FMECH-R1, Westinghouse Research Laboratories, Pittsburgh, Pennsylvania. 1969.

Byskov E. ‘The calculation of stress intensity factors using the finite element method with cracked elements’, Int. J. Fracture Mech. 1970 6, 159–167.

Walsh P. F. ‘The computation of stress intensity factors by a special finite element technique’, Int. J. Solids Struct. 1971 7, 1333–1341.

Tracey D. M. ‘Finite elements for determination of crack tip elastic stress intensity factors’, Engg. Fracture Mech. 1971 3, 255–265.

Pian T. H. H. Tong P. Luk C. H. ‘Elastic crack analysis by a finite element hybrid method’, Proceedings 3rd Airforce Conf. on Matrix Methods in Structural Mechanics, Wright Patterson Base, Ohio, U.S.A. 1971.

Rao A. K. Raju I. S. Kristna Murty A. V. ‘A powerful hybrid method in finite element analysis’, Int. J. Num. Methods Engg. 1971 3, 389–403.

Yamamoto Y. ‘Finite element approaches with the aid of analytical solutions’, Presented at the Japan - U.S. Seminar on Matrix Methods of Structural Analysis and Design, Tokyo. August, 1969.

Blackburn W. S. Hellen T. K. ‘Calculation of stress intensity factors for elliptical and semi-elliptical cracks in blocks and cylinders’, Research Report RD/B/N3103, Central Electricity Generating Board, Berkeley Nuclear Laboratories. 1974.

Blackburn W. S. ‘Calculation of stress intensity factors at crack tips using special finite elements’, Conf. on Maths of Finite Elements at Crack tips using special elements, Brunel University. 1972.

Irwin G. R. Kies J. A. ‘Critical energy rate analysis of fracture strength’, Weld. J. (Res. suppl.) 1954, 33, 193s–198s.

Srawley J. E. Jones M. H. Gross B. ‘Experimental determination of the dependence of crack extension force on crack length for a single-edge-notch tension specimen’, 1964 NASA TND-2396.

Huculak P. ‘Stress intensity factors for a crack progressing along a series of equally spaced holes’, Aeronautical Report, M.S. 117, Canada. 1968.

Cartwright D. J. Ratcliffe G. A. ‘Strain energy release rate for radial cracks emanating from a pin loaded hole’, Int. J. Fracture Mech. 1972 8, 175–181.

Underwood J. H. Lassele R. R. Scanlon R. D. Hussain M. A. ‘A compliance K calibration for a pressurised thick-wall cylinder with a radial crack’, Engg. Fracture Mech. 1972 4, 231–244.

Gallagher J. P. ‘Experimentally determined stress intensity factors for several contoured double cantilever beam specimens’, Engg. Fracture. Mech. 1971 3, 27–43.

Kobayashi A. S. (Ed.) ‘Experimental techniques in fracture mechanics’, SESA Monograph. 1973.

Schroedl M. A. Mcgowan J. J. Smith C. W. ‘An assessment of factors influencing data obtained by the photoelastic stress freezing technique for stress fields near crack tips’, Engg. Fract. Mech. 1972 4, 801–809.

Hardy A. K. ‘Determination of stress intensity factors: An evaluation of two methods’, M.Sc. Thesis, University of Bath 1972.

Marloff R. H. Leven M. M. Ringler T. N. Johnson R. L. ‘Photoelastic determination of stress intensity factors’, Expl. Mech. 1971 11, 529–539.

Creager M. ‘The elastic stress field near the tip of a blunt crack’, M.Sc. Thesis, Lehigh University, U.S.A. 1966.

Emery A. F. Barrett C. F. Kobayashi A. S. ‘Temperature distributions and thermal stresses in a partially filled annulus’, Expl. Mech. 1966 6, 602–608.

Smith D. G. Smith C. W. ‘A photoelastic evaluation of the influence of closure and other effects upon the local bending stresses in cracked plates’, Int. J. Fracture Mech. 1970 6, 305–318.

Smith D. G. Smith C. W. ‘Photoelastic determination of mixed mode stress intensity factors’, Engg. Fract. Mech. 1972 4, 357–366.

Wilson W. K. ‘Comparison of the stress distribution on the plane of symmetry at the WOL test specimen obtained by various methods and an interpretation of the results of a photoelastic study of the specimen’, Research Report 66–1D7-MEMTL-R2, Westinghouse Research Laboratories, Pittsburgh, Pennsylvania, 1966.

Leven M. M. ‘Stress distribution in the M4 biaxial fracture specimen’, Research Report 65–1D7-STRSS-R1, Westinghouse Research Laboratories, Pittsburgh, Pennsylvania. 1965.

Paris P. C. ‘Fatigue - An interdisciplinary approach’, 107–127, Eds. Burke J. J. Reed N. L. Wiess V. , Syracuse University Press. 1964.

James L. A. Anderson W. E. ‘A simple experimental procedure for stress intensity factor calibration’, Engg. Fracture Mech. 1969 1, 565–568.

Dudderar T. D. Gorman H. J. ‘The determination of mode I stress intensity factors by holographic inteferometry’, Expl. Mech. 1973 13, 145–149.

Sommer E. ‘An optical method for determining the crack-tip stress intensity factor’, Engg. Fracture Mech. 1970 1, 705–718.

Srawley J. E. Brown W. F. ‘Fracture toughness testing methods’, ASTM STP 381.

ASTM Special Committee on Fracture testing of High Strength Metallic Materials ‘Progress in measuring fracture toughness using fracture mechanics’, Materials Research and Standards, 4 (3) March 1964, 107–119.

Boyle R. W. Sullivan A. M. Krafft J. M. ‘Determination of plane strain toughness with sharply notched sheets’, Welding Journal (Research Supplement) 41, 9, September 1962, 428s-432s.

Lindley C. Wilkinson T. Priest A. H. ‘A clip gauge extensometer for use at elevated and cryogenic temperatures’, British Steel Corporation, Physical Metallurgy Centre, Technical Note PMC/APE/23/74.

Brown W. F. Srawley J. E. Plane strain crack toughness testing 1967 (ASTM STP 410, Philadelphia).

May M. J. ‘British experience with plane strain fracture toughness (K_Ic) testing’, ASTM STP 463, 1970, 41–62.

Wilkinson T. Walker E. F. ‘The influence of crack length and thickness on plane strain fracture toughness tests’, British Steel Corporation, Corporate Laboratories Report, MG/30/72.

Gross B. Srawley J. E. ‘Stress intensity factors for single edge notch specimens in bending or combined bending and torsion by boundary collocation of a stress function’, NASA TN D-2603 1965.

Walker E. F. May M. J. ‘Compliance functions for various types of test specimen geometry’, BISRA Report No. MG/E/307/67.

Priest A. H. May M. J. ‘Fracture toughness testing in impact’, BISRA Report MG/C/46/69.

Venzi S. Priest A. H. May M. J. ‘Influence of inertial load in instrumented impact tests’, ASTM STP 466, 165–180.

Valeriani G. Venzi S. ‘Determination of K_Ic and COD in impact tests’, Centro Sperimentale Metallurgico Report for ECSC, 1974.

Wells A. A. ‘The status of COD in fracture mechanics’, Canadian Congress of Applied Mechanics, 1971.

Ingham T. ‘The effect of geometry on the interpretation of COD test data’, Proceedings of Conference on Practical Applications of Fracture Mechanics to Pressure Vessel Technology, Institution of Mechanical Engineers, London, May 1971.

Venzi S. ‘Determination of a generalized relationship for COD calibration’, Centro Sperimentale Metallurgico Report 1973.

Barr R. R. Elliott D. Terry P. Walker E. F. ‘The measurement of COD and its application to defect significance’, British Steel Corporation Report GSD/PMC/1/75.

Priest A. H. May M. J. ‘Strain rate transitions in structural steel’, BISRA Report MG/C/95/69.

Mcintyre P. Priest A. H. ‘Measurement of sub-critical flaw growth in stress corrosion, cyclic loading and high temperature creep by the DC electrical resistance technique’, BSC Corporate Laboratories Report MG/54/71.

Mcintyre P. Elliott D. ‘The role of stretch zone formation in environmentally activated crack growth in steels’, Proc. Third International Conference on the Strength of Metals and Alloys, Cambridge 1973.

Knott J. ‘The fracture toughness of metals’, Paper 4, this issue.

‘Proposed recommended standard for R-curve determination’, Attachment 2, ASTM E24–01 Minutes, March 7, 1973.

Judy R. W. Goode R. J. ‘Fracture extension resistance (R-curve) characteristics for three high strength steels’, ASTM STP 527, 48–61.

Landes J. D. Begley J. A. ‘The effect of specimen geometry on J_Ic’, ASTM STP 514, 24–39.

Logsdon W. A. ‘Elastic plastic (J_Ic) fracture toughness values: Their experimental determination and comparison with conventional linear elastic (K_Ic) fracture toughness values for five materials’, Westinghouse Electric Corporation, Scientific Paper 74–1E7-FMPWR-P1, 1974.

Roddis R. Priest A. H. ‘An investigation of Rice's J integral as a fracture criterion’, British Steel Corporation Report PMC/6791/-/74/A.

Witt F. J. ‘Equivalent energy procedures for predicting gross plastic fracture’, Oak Ridge National Laboratory Paper ORNL-TM-3172.

Buchalet C. Mager T. R. ‘Experimental verification of lower bound K_Ic values utilising the equivalent energy concept’, ASTM STP 536, 281–296.

Orner G. M. Hartbower C. E. ‘Sheet fracture toughness evaluated by charpy impact and slow bend’, Welding Journal (Research Supplement) 40, September 1961, 405s-416s.

‘Report of royal commission into the failure of Kings Bridge’, Presented to Parliament (of) Victoria, Melbourne 1963.

Smith N. Hamilton I. G. West of Scotland Journal 76, 1968/69. Paper 591, 111–153.

Samons C. H. API meeting Houston, Texas May 1954.

Parker E. R. ‘Brittle behaviour of engineering structures’, John Willey and Sons, New York, 1957.

Hodgson J. Boyd G. M. Trans. Royal Institution of Naval Architects 1958, 100, 141–180.

Robertson T. S. JISI 1953 175, 361.

Pellini W. S. ‘Criteria for fracture Control’, NRL Report 7406, May, 1972.

Wells A. A. Welding Journal 1961 26, 4, 182s-192s.

Anon. Brit. Weld. J. 1955 2, 6, 254–263.

Greene T. W. Welding Journal 1949 14, 193s.

Woodley C. C. Burdekin F. M. and Wells A. A . Brit. Weld. J. 1964 11, 3, 123–136.

Rose R. T. BWRA Bulletin, May 1962.

British Standards Institute BS 4741, 1971.

British standards Institute BS 2654, 1974.

Griffith A. A. ‘The phenomena of rupture and flow in solids’, Phil. Trans. Roy. Soc. 1921 A221, 163–198.

Irwin G. R. U. S. Naval Research Lab. Report NRL 4763 − 1956.

Cottrell A. H. ‘Steels for reactor pressure circuits’, 281–296, 1960, ISI.

American Society for Testing and Materials ASTM S7P381. ‘Plane strain crack toughness testing of high strength metallic materials’, 1967.

Kies J. A. Smith H. L. Stonesifer F. R. NRL Report 6918, Sept. 1969.

Burdekin F. M. Stone D. E. W. ‘The crack opening displacement approach to fracture mechanics in yielding materials’, Jnl. Strain Analysis 1966 1, 145–153.

Burdekin F. M. Dawes M. G. ‘Practical use of linear elastic and yielding fracture mechanics with particular reference to pressure vessels’, Proc. Inst. Mech. Engrs. Conf. on ‘Practical applications of fracture mechanics to pressure vessel technology’, 1971, 28–37.

Dawes M. G. Welding Journal 1974 53, 9, 369s-379s.

Baker R. G. Barr R. R. Gulvin T. F. Terry P. 2nd Int. Conf. on Pressure Vessel Technology, San Antonio, 1973.

Dawes M. G. Welding Research International, 1974, 4, 4, 41–73.

Dawes M. G. Met Construction and Brit. Weld. J. 1971 3, 2, 61.

Dolby M. A. Archer G. L. Proc. I. Mech. E. Conf., London, May 1971.

Dolby M. A. Met Construction and Brit Weld. J. 1974, 6, 228–233.

Barr R. R. Burdekin F. M. ‘Design and brittle fracture’ To be presented Rosenham Centenary Conference, NPL. Sept. 1975.

Hayes D. J. Maddox S. J. Welding Institute Research Bulletin, 13 (1), January 1972.

Burdekin F. M. Welding Institute Autumn Meeting Conference, November 1975.

Frost N. E. Marsh K. J. Pook L. P. Metal Fatigue 1974. (Clarendon Press, Oxford).

Moore H. F. Kommers J. B. The fatigue of metals 1927. (McGraw-Hill, New York).

Frost N. E. ‘The current state of the art of fatigue: Its development and interaction with design’. Society of Environmental Engineers Fatigue Group Conference on the World of Fatigue. City University, London. (To be published in J. Soc. Env. Engrs.)

Forsyth P. J. E. A two-stage process of fatigue crack growth. Proc. Crack Propagation Symp., 1961, 76–94, Cranfield College of Aeronautics, 1962.

Weber J. H. Hertzberg R. W. ‘Effect of thermo-mechanical processing on fatigue crack propagation’, Met. Trans. 1973 4 (2), 595–601.

Zweben C. ‘On the strength of notched composites’, J. Mech. Phys. Solids 1971 19 (3), 103–116.

Pook L. P. Holmes R. ‘Bi-axial fatigue crack growth tests’. To be presented at the Society of Environmental Engineers Fatigue Group, Fatigue Testing and Design Conference and Exhibition. The City University, London, 5–9 April, 1976.

Arad S. Radon J. C. Culver L. E. ‘Design against fatigue failure in thermoplastics’, Engng fract. Mech. 1972 4 (3), 511–522.

Frost N. E. Pook L. P. Denton K. ‘A fracture mechanics analysis of fatigue crack growth data for various materials’, Engng fract. Mech. 1971 3, 109–126.

Lindley T. C. Richards C. E. ‘The relevance of crack closure to fatigue crack propagation’, Mater. Sci. & Engng 1974 14 (3), 281–293.

Hoeppner D. W. Krupp W. E. ‘Prediction of component life by application of fatigue crack growth knowledge’, Engng fract. Mech. 1974 6 (1), 47–70.

Pook L. P. ‘Fracture mechanics; how it can help engineers’, Trans. N-E Coast Inst. Engrs and Shpbldrs 1974 90 (3), 77–92.

Pook L. P. ‘Basic statistics of fatigue crack growth’. Paper presented at a symposium on Statistical Aspects of Fatigue Testing held by the Society of Environmental Engineers Fatigue Group at Warwick University on 12 Feb. 1975. (To be published in J. Soc. Env. Engrs.)

Clark W. G. Hudak S. J. ‘Variability in fatigue crack growth rate testing’, ASTM E-24.04.01 Task Group Report. Westinghouse Research Laboratories. Scientific Paper 74-IE7-MSLRA-P2, 1974.

Pook L. P. Greenan A. F. Fatigue crack growth threshold for mild steel, a low alloy steel and a grey cast iron 1974. NEL Report 571. (National Engineering Laboratory, East Kilbride, Glasgow)

Schijve J. ‘Fatigue damage accumulation and incompatible crack front orientation’, Engng fract. Mech. 1974 6 (2), 245–252.

Carden A. E. Mcevily A. J. Wells C. H. (Eds). ‘Fatigue at elevated temperature’, ASTM STP 520, 1973. (American Society for Testing and Material, Philadelphia Pa.)

Gray I. Heaton M. D. ‘Application of fracture mechanics to the fatigue of power plant components’. Designing against Fatigue - Implications of Recent Findings on Complex Situations 1974. (IMechE., London)

Pook L. P. ‘Fracture mechanics analysis of the fatigue behaviour of welded joints’, Weld. Res. Int. 1974 4 (3), 1–24.

Gurney T. R. Maddox S. J. ‘Determination of fatigue design stresses for welded structures from an analysis of data’, Metal Constn 1972 4 (11), 418–422.

Wheeler O. E. ‘Spectrum loading and crack growth’, J. bas. Engng 1972 94D (1), 181–186.

Brussat T. R. ‘An approach to predicting the growth to failure of fatigue cracks subjected to arbitrary uniaxial cyclic loading’. Damage tolerance in aircraft structures. ASTM STP 486, 122–147, 1971. American Society for Testing and Materials, Philadelphia Pa.

Marsh K. J. ‘Full-scale testing - an aid to the designer’, J. Soc. Env. Engrs 1974 13–4, 63, 15–16, 21–22.

Schütz W. ‘Fatigue life prediction of aircraft structures - past, present and future’, Engng fract. Mech. 1974 6 (3), 671–699.

Parkins R. N. British Corrosion Journal 1972 7, 15.

West J. M. Metal Science Journal 1973 7, 169.

Parkins R. N. Proc. Conf. on ‘Stress corrosion cracking and hydrogen embrittlement of iron base alloys’. To be published. National Association of Corrosion Engineers, Houston, U.S.A.

Uhlig H. H. ‘Fundamental aspects of stress corrosion cracking’, Edited by Staehle R. W. Forty A. J. Van Rooyen D. 1969, NACE, Houston, U.S.A. 86.

Wiederhorn S. M. ‘Corrosion fatigue: Chemistry, mechanics and microstructure’. Edited by Devereux O. F. McEvily A. J. Staehle R. W. , 1971, NACE, Houston, U.S.A. 731.

Kambour R. P. loc. cit. 681.

Parkins R. N. ‘The interactions of stress and corrosion in the stress corrosion cracking of iron base alloys’. Paper 6, Proc. Conf. Mechanics and Mechanisms of Fracture, Churchill College, Cambridge, 1973.

Oriani R. A. Proc. Conf. ‘Stress corrosion cracking and hydrogen embrittlement of iron base alloys’. To be published. NACE, Houston, U.S.A.

St. John C. Gerberich W. W. Met Trans. 1973, 4, 589.

Speidel M. O. Conference on ‘Hydrogen in metals’, to be published, 1975, NACE.

Speidel M. O. ‘The theory of stress corrosion cracking in alloys’, Edited by Scully J. C. NATO, Brussels, 1971, 289.

Feeney J. A. Blackburn M. J. loc. cit. 355.

Brown B. F. Beacham C. D. Corrosion Science 1965 5, 745.

Wearmouth W. R. Dean G. P. Parkins R. N. Corrosion 1973 29, 251.

Syrett B. C. Corrosion 1971 27, 270.

Parkins R. N. 5th Symposium on Line Pipe Research, American Gas Association, Catalogue No. L.30174, 1974.

Mcintyre P. Proc. Conf, ‘Stress corrosion cracking and hydrogen embrittlement of iron base alloys’. To be published. NACE, Houston, U.S.A.

Pourbaix M. ‘The theory of stress corrosion cracking in alloys’. Edited by Scully J. C. NATO, Brussels, 1971, 17.

Smith J. A. Peterson M. H. Brown B. F. Corrosion 1970 26, 539.

Congleton J. Proc. Conf. ‘Stress corrosion cracking and hydrogen embrittlement of iron base alloys’. To be published. NACE, Houston, U.S.A.

Buntin W. D. Concept and conduct of proof test of F-111 production aircraft. Aeronaut. J. 1972 76 (742), 587–598.

Mcclintock F. Proc. Roy. Soc. (London) Ser. A., 1965, 285, 58.

Hill R. The Mathematical Theory of Plasticity. Oxford Univ. Press, 1950.

Dugdale D. S. ‘Yielding of steel sheets containing slits’, Jnl. Mech. Phys. Solids 1960 8, 100–104.