Limit loads of variable-thickness circular plates are given for the von Mises yield condition. The plates are loaded with a uniform transverse pressure and are hinge supported at the edge. The effect of transverse shear on the yield condition and the collapse load is examined. It is shown that the inclusion of transverse shear in the analysis leads to restrictions on the edge thickness of the plates.
Get full access to this article
View all access options for this article.
References
1.
HodgeP. G.jun., Plastic analysis of structures1959 (McGraw-Hill Book Co. Inc., New York and London).
2.
SawczukA.JaegerT.Grenztragfahigkeits Theorie von Platten1963 (Springer-Verlag, Berlin).
3.
ZyczkowskiiM.‘Combined loadings in the theory of plasticity’, Int. J. nonlin. Mech.19672, 173–205.
4.
HopkinsH. G.PragerW.‘Limits of economy of material in plates’, J. appl. Mech., Trans. Am. Soc. mech. Engrs195577, 372–374.
5.
HaydlH. M.SherbourneA. N.‘Limit loads of variable thickness circular plates in bending’, Nucl. Engng Des.197222, 296–300.
6.
TimoshenkoS.Woinowsky-KriegerS.Theory of plates and shells 2nd edition 1959 (McGraw-Hill Book Co. Inc., New York and London).
OschatzA.‘Bestimmung der Traglast von Kreis- und Kreis-ringplatten mit Berucksichtigung der Querkraft-schubspannungen’, Z. angew. Math. Mech.196848, 325–332.
14.
JohnsonW.‘Upper bound to the load for the transverse bending of flat rigid-perfectly plastic plates’, Int. J. mech. Sci.196911, 913–938.
