The application of a new thick shell element is described with reference to vibration problems. The element is derived from the general isoparametric solid and therefore allows shear deformations to be included. It can take up highly distorted shapes and is useful in such studies as vibration of turbine blades for which it is superior to elements based on thin-shell theory. This element can also be used for thin shells with caution, excessive length/thickness ratios being avoided.
Get full access to this article
View all access options for this article.
References
1.
AhmadS.IronsB. M.ZienkiewiczO. C.‘Curved thick shell and membrane elements with particular reference to axi-symmetric problems’, Proc. 2nd Conf. Matrix Meth. Struct. Mech.1968 (Wright-Patterson Air Force Base, Ohio).
2.
AhmadS.IronsB. M.ZienkiewiczO. C.‘Analysis of thick and thin shell structures by general, curved, elements’, Int. J. num. Method Engng19702.
3.
AhmadS.Curved finite elements in the analysis of solid, shell and plate structures1969 Thesis submitted to the University of Wales for the degree of Ph.D.
4.
ZienkiewiczO. C.The finite element method, 2nd edn 1970 (McGraw-Hill Book Co. Inc., New York and London).
5.
ErgatoudisJ.IronsB. M.ZienkiewiczO. C.‘Three-dimensional analysis of arch dams and their foundations’, Symp. Arch Dams1968 (Institution of Civil Engineers, London).
6.
ZienkiewiczO. C.IronsB. M.ErgatoudisJ.AhmadS.ScottF. C.‘Isoparametric and associated element families for two- and three-dimensional analysis’, Finite element methods in stress analysis (Edited by HolandI.BellK.) 1969 (Tapir Press, Trondheim).
7.
ErgatoudisJ.Isoprametric elements in two- and three-dimensional stress analysis1968 Thesis submitted to the University of Wales for the degree of Ph.D.
8.
IronsB. M.‘Roundoff criteria in direct stiffness solutions’, J. Am. Inst. Astronaut. Aeronaut.19686, 1308.
9.
AhmadS.IronsB. M.ZienkiewiczO. C.‘Matrixvector handling scheme for general shell and three dimensional analysis’, Int. J. num. Method Engng1970 2.
10.
AndersonR. G.IronsB. M.ZienkiewiczO. C.‘Vibration and stability of plates using finite elements’, Int. J. Solids Struct.19684, 1031.
11.
AndersonR. G.A finite element eigenvalue solution system1968 Thesis submitted to the University of Wales for the degree of Ph.D.
12.
IronsB.M.‘Structural eigenvalue problem—elimination of unwanted variables’, J. Am. Inst. Astronaut. Aeronaut.19653, 961.
13.
GuyanR. J.‘Reduction of stiffness and mass matrices’, J. Am. Inst. Astronaut. Aeronaut.19653, 280.
14.
PlunkettR.‘Natural frequencies of uniform and nonuniform rectangular cantilever plates’, J. mech. Engng Sci.19635, 146.
15.
OlsonM. D.LindbergG. M.‘Vibration analysis of cantilever curved plates using a new cylindrical shell finite element’, Proc. 2nd Conf. Matrix Meth. struct. Mech.1968 (Wright-Patterson Air Force Base, Ohio).
16.
ArmstrongE. K.StevensonR. E.‘Some practical aspects of compressor blade vibration’, Jl R. aeronaut. Soc.196064, 117.
