Contributions to a compressive deformation can result from change of shape and change of size. For most materials these two contributions are of similar magnitude. For materials such as rubber which have a low shear modulus but a relatively high bulk modulus any restriction on their freedom to change shape can have a very marked effect on their stiffness in compression. Poisson's ratio is used to relate the relative magnitudes of shear and bulk moduli.
Get full access to this article
View all access options for this article.
References
1.
LoveA. E. H.A treatise on the mathematical theory of elasticity 4th edition 1952, 99–104 (Cambridge University Press).
2.
WoodL. A.MartinG. M.‘Compressibility of natural rubber at pressures below 500 kg/cm2, J. Res. natn. Bur. Stand196468A, 259.
3.
KayeG. W.C.LabyT. H.Tables of physical and chemical constants 13th edition 1966, 32 and 33 (Longmans Green & Co. Ltd, London).
4.
RitchieP. D. (Ed.) Physics of plastics1965, 116 (Iliffe Books Ltd, London).
5.
MarksL. S. (Ed.) Mechanical engineers’ handbook6th edition1958, 5–6 (McGraw-Hill Book Co. Inc., New York and London).
6.
GentA. N.‘Load-deflection relations and surface strain distributions for flat rubber pads’, Rubb. Chem. Technol.195831, 395.
7.
GentA. N.LindleyP. B.‘The compression of bonded rubber blocks’, Proc. Instn mech. Engrs1959173, 111.
8.
PayneA. R.‘Shape factors and functions in rubber engineering’, Engineer, Lond.1959207, 328 and 368.
9.
LindleyP. B.‘Load-compression relationships of rubber units’, J. Strain Analysis19661, 190.
