Natural frequencies of cooling tower shells

Abstract

Abstract

A theoretical determination of the lowest natural frequencies of inextensional vibrations of hyperbolic cooling tower shells is first presented. It is shown that inextensional behaviour is only possible for certain types of support condition at the base, one of which consists of four pairs of inclined columns evenly spaced round the circumference which, at their points of attachment, only permit displacements normal to the plane of the shell.

Experiments to determine the natural frequencies and modes of vibration of a model shell are then described. This model, which was made by the electro-deposition of copper on a Perspex mould, could be supported at its base by up to forty pairs of inclined columns. Using only four evenly spaced pairs of columns the lowest natural frequencies of inextensional vibrations were first determined, and found to agree well with the theoretical values. The natural frequencies and modes of the extensional vibrations which occurred when the shell was supported by forty pairs of columns were then explored. Finally, the effect of removing some of the supports, thereby simulating a horizontal fracture in part of the shell, was studied.

The possibility of wind-induced vibrations occurring in practice is then considered. It is concluded that these are unlikely to occur unless the shell has already suffered damage, as for example by experiencing a horizontal fracture over part of its circumference near the base.