A general yield criterion for anisotropic materials is derived from the linear relationship between strain and stress components. The particular forms of the yield criterion for plane stress and for certain types of symmetry are discussed and are compared with available experimental data. The separate effects of the stress ratio and the direction of the stress axes on the yield stress are also determined.
Get full access to this article
View all access options for this article.
References
1.
DornJ. E.‘Stress-strain rate relations for anisotropic plastic flow’, J. Appl. Phys.194920 (1), 15.
2.
HillR.‘A theory of the yielding and plastic flow of anisotropic metals’, Proc. R. Soc.1948 A 193, 281.
3.
NaghdiP. M.EssenburghF.KoffW.‘An experimental study of initial and subsequent yield surfaces in plasticity’, J. Appl. Mech.195825, 201.
4.
IveyH. J.‘Plastic stress-strain relations and yield surfaces for aluminium alloys’, J. mech. Engng Sci.19613 (1), 15.
5.
MairW. M.PughH.LI. D. ‘Effect of pre-strain on yield surfaces in copper’, J. mech. Engng Sci.19646 (2), 150.
6.
HsuT. C.‘Some principles of design of the combined stress testing machine’, Proc. Instn Mech. Engrs1965180 (Pt 3A), Paper 16: Symposium on Materials Testing Machines. Joint Convention for Materials and Environmental Testing.
7.
IagnIu. I.ShishmarevO. A.‘Some results of an investigation of elastic state limit of plastically drawn nickel samples’, Dokl. Akad. Nauk. SSSR1958119 (1), 431.
8.
HsuT. C.Communication for W. M. Mair and H. LI. D. Pugh's paper, ‘Effect of pre-strain on yield surfaces in copper’, J. mech. Engng Sci.19646 (4), 424.
9.
LodeW.‘Versuche über den Einfluss der mittleren Hauptspannung auf das Fliessen der Metale Eisen, Kupfer und Nickel’, Z. Phy.192636, 11–12 Heft, 913.
10.
TaylorG. I.QuinneyH.‘The plastic distortion of metals’, Phil. Trans R. Soc.1931 A 230, 323.
